Which spyderco is in the mail?

[skers95]

My first Para 3.

[jwbnyc]

Back up Endura 4 Wharncliffe K390.

Back up Rockjumper SE.

[sn0wman72]

Could not resist any longer, have a PE Rockjumper on the way.

[Stas]

Endura 20CV

[Dnwrghtsr]

Swayback

[Traditional.Sharpening]

For my youngest daughters first knife... I felt strange spending $150 for a pink handled knife as it's not something I'm accustomed to.

[riclaw]

Ordered a Rockscale backspacer for the PM2. I like that the screw hole is threaded instead of sliding over the factory standoff and the lanyard tube is integral to the piece.

[Freediver]

These were my last 2 mail calls

[TimButterfield]

My first three are inbound. The DLT PM2 Cru-wear/G10 should be here next week. The Native 5 Salt PE MagnaCut and Chaparral XHP/CF should be here a week or so later.

[mikey177]

^ Jeff from CutleryShoppe sure has some gems in his collection.

****

I ordered a Super Blue Delica, which I saw was back in stock at SFO.

[TimButterfield]

Next one ordered: Caribbean leaf SE.

This one seemed lower priced on Amazon, but I checked the Spyderco dealer locator page to verify the seller was an official dealer. The first one was not, so I swapped to a different seller that was.

[Spyderbot_matrix]

This Thursday I will get my first Super steel-

Paramilitary 2 s45vn with digi camo scales.

[thuyenbuom]

Dragonfly 2 Salt; FRN Yellow H2 SpyderEdge

Delica 4 Gray-Blue Zome Super Blue Black Blade

Delica 4 Gray-Blue Zome Super Blue Satin Blade

[mikey177]

Manbug H1 wharnie arrived this afternoon. Didn't have enough sunlight for good photos.

[cycleguy]

U. K. P. K. SPY-27

[GT99]

Have a cutlery shoppe PM2 that should have already been delivered friday but Canada post seems to have done a half day on friday because of the holiday nobody else gets (only government employees) which is a piss off especially when its on the truck and would have been delivered in a few hours, now its says will be delivered next day but of course the holiday was actually saturday and they dont work weekends so they get a lieu day today, been waiting forever for this knife a had to get it shipped to a friend in california, he disassembled and sent in separate packages just so the dirty thieves at CBSA didnt steal it.

also decided to order another k390 wharncliffe (endela) as being discontinued I want a back up in case something happens to mine

[olditguy]

Swayback. My first Spyderco R.I.L.

[riclaw]

Ordered a Rockscale backspacer for the PM2. I like that the screw hole is threaded instead of sliding over the factory standoff and the lanyard tube is integral to the piece.

Finally installed the Rockscale Design Graphite backspacer on my wharncliffe PM2. Perfect fit and finish. It's all black hardware and clip tie the two scales together into a cohesive whole.
Shoutout to Matt @RockscaleDesign for fantastic customer service!

[Paul Ardbeg]

Today is a good day Luckily I was able to purchase this from a fellow collector. Besides a small grind mark on the blade it has been hardly used. My first Millie! S90v blade and CF scales. Just got it in the mail and used it to cut up some carboard, what a knife

[TimButterfield]

Here is most of my haul for today. This is the remains of purchasing my first three Spyderco (prior shipments not shown). My first set of three Spyderco = 13. I think my math is off. The image doesn't include a few small kitchen knives also received, the counter critter & puppy & z-cut, and some boron SharpMaker rods.

Here is the list of this set:

• Delica 4 Gray-Blue Zome Super Blue
• Lil' Temperance 3 Lightweight VG-10
• Caly 3.5 CLIPIT Carbon Fiber ZDP 189
• Endela Lightweight Wharncliffe K390
• Manix 2 Lightweight FRCP Black
• Caribbean LC200N G10 Black/Yellow
• Atlantic Salt Green LC200N
• Pacific Salt 2 FRN Green LC200N
• Endura 4 FRN K390
• Native Chief Brown G-10 M390