MT32P - SRS13/SUS405 Mule Team - Release Date
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Hi Divil,
Welcome to our forum.
sal
Welcome to our forum.
sal
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Hi, MST or MDT?
I’ll try, but if you limit it to one per head it would be easier
I’ll try, but if you limit it to one per head it would be easier
No por mucho tempranar, amanece mas madrugo
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
elmeringalo wrote: ↑Sun Feb 13, 2022 2:05 amHi, MST or MDT?
I’ll try, but if you limit it to one per head it would be easier
Pretty sure it's MST given that daylight savings doesn't start for another month.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
DST again?!? Geez, I feel like we finally got off it, now it’s coming back
- legOFwhat?
- Member
- Posts: 3158
- Joined: Mon Jul 09, 2018 5:58 am
- Location: Kentucky; Earth
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
I wonder how visible the laminate line will be on these? I'm down for at least 1, still haven't made handles for the last few releases, yet.
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”
MNOSD #0049
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
SpydieWiki incorrectly states MT32P as S45VN whereas it really was MT31P.
Also, it sounds like MT32P, MT33P and MT34P all have a quantity of around 500 like MT28P, MT29P and MT30P.
Also, it sounds like MT32P, MT33P and MT34P all have a quantity of around 500 like MT28P, MT29P and MT30P.
TazKristi wrote: ↑Mon Mar 22, 2021 10:30 am…
MT27 - Steel: Micro-Melt PD#1 | Released: October 2017 | Quantity: Approximately 800
MT28 - Steel: CPM SPY27 | Released: February 2021 | Quantity: Approximately 500
MT29 - Steel: Z-Max PM | Released June 2021 | Quantity: Approximately 550
MT30 - Steel: Z-Wear PM | Released August 2021 | Quantity: Approximately 500
MT31- Steel: CPM S45VN | Released: April 2021 | Quantity: Approximately 500
MT35 - Steel: CPM MagnaCut | Released: December 2021 | Quantity: Approximately 2000
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
elmeringalo wrote: ↑Sun Feb 13, 2022 2:05 amHi, MST or MDT?
I’ll try, but if you limit it to one per head it would be easier
Google “Current Mountain Time”.
A limit of one per household makes a lot more sense with just 500 made. That will give more people a chance to get one otherwise it’s open season for flippers.
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Very true. I strongly support this.
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
But really how many of these are flipped? Maybe 40-50 total, so ~10% maybe. I always buy two because I buy one for someone else. I know others who do it also. Locking them down to one each may not be as beneficial to shutting down flippers as assumed.
- Deadboxhero
- Member
- Posts: 2179
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Nah, first come first serve is king.
I'd like to buy two, one to sacrifice and surface grind down and test the hardness of the core steel on.
I'd like to buy two, one to sacrifice and surface grind down and test the hardness of the core steel on.
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
I live in France and pay $45 in shipping. I need to buy two to make it worth my while and either equip a friend or gift to a relative in order to get feedback from them in real world use (kitchen, wood, shop, ...).
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
To be fair, it's still "first come first serve." It's just that the first 500 people will get one rather than the first ~250
I think the one-knife limit was done out of consideration to mule-team fans rather than to thwart flippers. By limiting to 1 per household, they also effectively double their chances of receiving user feedback. (This may be flawed logic as twice the availability may not directly correlate with number of reviews). Still, I doubt anyone paying secondary-market prices would be willing to run their mule through a torture test. After learning they had ordered these forever ago without requesting enough material to make more mules (as with the last few runs), I figured I didn't have a chance to get one. That being said, 2 x (a very small probability) is still a very small probability. Good luck to everyone trying to get one!
I'm still trying to figure out how I could possibly prefer srs13 over hap40. Maybe if they can run clad srs13 harder than clad hap40? Alternatively, perhaps the stainless core prevents edge dulling from corrosion when cutting acidic foods. Guess I'll have to try for one, test it out, and report back.
I think the one-knife limit was done out of consideration to mule-team fans rather than to thwart flippers. By limiting to 1 per household, they also effectively double their chances of receiving user feedback. (This may be flawed logic as twice the availability may not directly correlate with number of reviews). Still, I doubt anyone paying secondary-market prices would be willing to run their mule through a torture test. After learning they had ordered these forever ago without requesting enough material to make more mules (as with the last few runs), I figured I didn't have a chance to get one. That being said, 2 x (a very small probability) is still a very small probability. Good luck to everyone trying to get one!
I'm still trying to figure out how I could possibly prefer srs13 over hap40. Maybe if they can run clad srs13 harder than clad hap40? Alternatively, perhaps the stainless core prevents edge dulling from corrosion when cutting acidic foods. Guess I'll have to try for one, test it out, and report back.
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Same for me, I live in Spain, but limit of one must give double of options. I’ve loosed three of the last fourRamonade wrote: I live in France and pay $45 in shipping. I need to buy two to make it worth my while and either equip a friend or gift to a relative in order to get feedback from them in real world use (kitchen, wood, shop, ...).
No por mucho tempranar, amanece mas madrugo
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Looks like Wouter got that fixed.
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Hey, everyone:
Following discussions here, we've changed the limit to ONE per household. If the sales are slow (we do not anticipate that scenario), we will consider lifting the limit.
Thanks much for your passion and feedback!
Ooh, and yes, it's MST. Sorry, I didn't catch it in my tips and tricks.
Kristi
Following discussions here, we've changed the limit to ONE per household. If the sales are slow (we do not anticipate that scenario), we will consider lifting the limit.
Thanks much for your passion and feedback!
Ooh, and yes, it's MST. Sorry, I didn't catch it in my tips and tricks.
Kristi
There is nothing more important than this one day.
- Deadboxhero
- Member
- Posts: 2179
- Joined: Tue Mar 01, 2016 4:35 am
- Contact:
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
I disagree, I like options. having two is good for testing, I'll sit this one out. More for others.dlum1 wrote: ↑Mon Feb 14, 2022 2:33 pmTo be fair, it's still "first come first serve." It's just that the first 500 people will get one rather than the first ~250
I think the one-knife limit was done out of consideration to mule-team fans rather than to thwart flippers. By limiting to 1 per household, they also effectively double their chances of receiving user feedback. (This may be flawed logic as twice the availability may not directly correlate with number of reviews). Still, I doubt anyone paying secondary-market prices would be willing to run their mule through a torture test. After learning they had ordered these forever ago without requesting enough material to make more mules (as with the last few runs), I figured I didn't have a chance to get one. That being said, 2 x (a very small probability) is still a very small probability. Good luck to everyone trying to get one!
I'm still trying to figure out how I could possibly prefer srs13 over hap40. Maybe if they can run clad srs13 harder than clad hap40? Alternatively, perhaps the stainless core prevents edge dulling from corrosion when cutting acidic foods. Guess I'll have to try for one, test it out, and report back.
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Well that made my indecisiveness easier, one it is!
- LakeOconee
- Member
- Posts: 108
- Joined: Fri Nov 12, 2021 10:58 am
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Thanks for the update Kristi, will MT32P be available in the SFO store?
MNOSD Member #0037
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Hi Shawn,
I can get you one if you want to test.
sal
I can get you one if you want to test.
sal
Re: MT32P - SRS13/SUS405 Mule Team - Release Date
Too bad for me, if you lift up the restriction I won't be able to pay $45 shipping twice and customs twice...
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s