A possible old gem!?
A possible old gem!?
So yesterday at work I'm sitting here on the forum and one of my coworkers comes into the office. He says "you like Seki-City knives" I kind of chuckle to myself, but am intrigued that he knew some of these knives are manufactured there. I told him they are Spyderco knives, and that yes indeed, some of them are manufactured there in Japan. He tells me that a couple years ago he bought a box full of around 20 knives from a friend of his for $100, and that he has one that looks like these (hole in the blade stood out to him). He had to work today, and I told him I would come in for some overtime and would love to check it out.
Turns out, I believe this is a 1st generation Endura?? Please correct me if I'm wrong. G-2 steel, molded pocket clip. The knife is in pretty good shape, serrations are still surprisingly razor sharp...sharper than my SE Salt 2 I bought just this past summer! No blade play and the blade free falls when engaging the lock. The tip is a little bent, but that's about the only flaw I can see right now.
He's offering to sell it to me for $25...I probably shouldn't pass this up!
Turns out, I believe this is a 1st generation Endura?? Please correct me if I'm wrong. G-2 steel, molded pocket clip. The knife is in pretty good shape, serrations are still surprisingly razor sharp...sharper than my SE Salt 2 I bought just this past summer! No blade play and the blade free falls when engaging the lock. The tip is a little bent, but that's about the only flaw I can see right now.
He's offering to sell it to me for $25...I probably shouldn't pass this up!
Last edited by TkoK83Spy on Sat Jan 26, 2019 9:59 pm, edited 2 times in total.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: A possible old gem!?
I would give him $30 and say thanks for the steel :D
Re: A possible old gem!?
I've never had anything in G-2. I just feel like it's such an older model and it's in good condition for the most part. I certainly don't need a huge Endura in full SE...but it is pretty nice! Amazed at how sharp it is.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: A possible old gem!?
Great find! I think for $25 I'd buy just to have a nice older model.
Of all the things I've lost I miss my mind the most!
- SpyderEdgeForever
- Member
- Posts: 6394
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: A possible old gem!?
I agree with you and I like this idea. That is a neat knife.
- standy99
- Member
- Posts: 2223
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: A possible old gem!?
Give him at least $50 as you know what it’s worth. Karma hurts
Im a vegetarian as technically cows are made of grass and water.
Re: A possible old gem!?
At $25 it's a steal.
$50 is about all it's worth ! (Give or take $10).
That's the same as mine except my blade is Aus-8.
I've recently purchased a few more in Aus-8 and VG-10 but none in G2.
Great knives to carry, hold and use.
3 x Endura 1 SE, 1 x Endura ? CE and a Black Pacific Salt. Want Aqua Salt, Fish Hunter and a Pacific Salt Yellow.
Re: A possible old gem!?
The following is in response to the same question I had about that same knife. Hope it helps!
Kyler durden 321 wrote: ↑
Sat Dec 08, 2018 2:37 pm
"Its basicly a gen 1 delica , they came in the black cardboard box with white outline , black lettering , the g2 was because the bladesmith had an obligation to previous buyers who had the rights to the gingami 1 steel and spyderco wasnt allowed to use that designation so they called it g2 instead."
Re: What steel are the gen 1 lbk ?
Postby sal » Sun Dec 09, 2018 12:06 am
"This is correct. There was no American equivalent to it so we called it G2 (whch stood for "Good Sh*t) and provided the chemistry to customers.
Once the obligation was finished, we could go to GIN 1 ( which stood for Gingami 1 )."
sal
Kyler durden 321 wrote: ↑
Sat Dec 08, 2018 2:37 pm
"Its basicly a gen 1 delica , they came in the black cardboard box with white outline , black lettering , the g2 was because the bladesmith had an obligation to previous buyers who had the rights to the gingami 1 steel and spyderco wasnt allowed to use that designation so they called it g2 instead."
Re: What steel are the gen 1 lbk ?
Postby sal » Sun Dec 09, 2018 12:06 am
"This is correct. There was no American equivalent to it so we called it G2 (whch stood for "Good Sh*t) and provided the chemistry to customers.
Once the obligation was finished, we could go to GIN 1 ( which stood for Gingami 1 )."
sal
Last edited by justjohn on Sat Jan 26, 2019 7:22 pm, edited 3 times in total.
- John
"Spyderco"...Vēnērunt, vīdērunt, vīcērunt
"Spyderco"...Vēnērunt, vīdērunt, vīcērunt
Re: A possible old gem!?
I always liked the simplicity of the molded clip but the idea that it could lose tension or even break off and I can't do anything about it really bothers me.
All SE all the time since 2017
~David
~David
- WireEdge Roger
- Member
- Posts: 926
- Joined: Mon May 18, 2009 11:25 am
- Location: Indiana
Re: A possible old gem!?
The second gen integral clip was a bit wider. I have this thinner version myself. They definitely loose tension over time. I never broke one off, but a couple of my friends did! I think they were fairly prone to that.
Re: A possible old gem!?
Mine hasn't lost tension in 27+ years. Don't / haven't used it much but I have caught it occassionaly on webbing
and it's still fine.
As for breaking, sorry but with the exception of the odd accident you have to abuse things to break them.
3 x Endura 1 SE, 1 x Endura ? CE and a Black Pacific Salt. Want Aqua Salt, Fish Hunter and a Pacific Salt Yellow.
Re: A possible old gem!?
Thankfully I have quite a few knives I rotate between, so this pocket clip shouldn't be an issue.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: A possible old gem!?
I'm sure it's mostly paranoia but I'm glad clips are serviceable now.
All SE all the time since 2017
~David
~David
Re: A possible old gem!?
The first Spyderco I bought from a Spyderco at a county fair. It was a Rescue with the molded clip. The guy working the booth said if it ever broke or stopped working they would cut the clip off and drill the handle for a metal clip, which they were phasing in at the time. Anyone ever have that done?
The next year at the fair I bought a Native and soon after lost the Rescue. Haven’t owned a molded clip since.
The next year at the fair I bought a Native and soon after lost the Rescue. Haven’t owned a molded clip since.
Re: A possible old gem!?
What’s the story with the hump at the pivot area on the clip side, does it serve to reinforce the pivot with extra material?
-
- Member
- Posts: 13
- Joined: Sun Dec 02, 2018 11:54 am
- Location: Picayune, Mississippi
Re: A possible old gem!?
I'm not sure about the original purpose, but that hump would appear to reinforce the pivot. I carry a similar Endura (wide integral clip, AUS-8) and it does make holding the knife when thumb opening much easier that it would be without it. The Merlin I just got has the same hump, only smaller.
Re: A possible old gem!?
Sal said that hump is to aid in one hand opening. I don’t get it though. The clip has always been my aid for a good one hand open grip.
Nice knife, by the way. :cool:
Nice knife, by the way. :cool:
- best wishes, Jazz.
Re: A possible old gem!?
Hi Hoot,
Welcome to our forum.
Hi TkoK83Spy,
Yes,
Ist generation Endura
sal
Welcome to our forum.
Hi TkoK83Spy,
Yes,
Ist generation Endura
sal
Re: A possible old gem!?
Rest assured Sal, it has ended up in the hands of someone that will truly appreciate it! Who knows how many hands it's passed through the past 20 years. Seems surreal to me that this opportunity even presented itself! Had I not been on the forum on my desktop that particular minute, him and I likely would have never had the conversation, as he typically doesn't work in my area.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: A possible old gem!?
Hi Rick,
1990 production. Almost 30 years old.
sal
1990 production. Almost 30 years old.
sal