Dyad II or New Concept Double Blade Folder?
Re: Dyad II or New Concept Double Blade Folder?
Hi Yab,
The new design is a double Compression lock.
sal
The new design is a double Compression lock.
sal
Re: Dyad II or New Concept Double Blade Folder?
:eek: How cool is this??!!
I assume it's going to use a common steel, one I already own. Might put me into a position where I break my golden rule...
Last edited by archangel on Sat Jan 12, 2019 12:47 pm, edited 1 time in total.
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
- knivesandbooks
- Member
- Posts: 1455
- Joined: Tue Aug 15, 2017 8:43 pm
- Location: Tulsa, OK
Re: Dyad II or New Concept Double Blade Folder?
That is so cool, Sal.
Christ is risen from the dead, trampling down death by death, and on those in the tombs bestowing life!
Re: Dyad II or New Concept Double Blade Folder?
Oh my, this is the best news I could have hoped for! If you say LC200N I don't know what I'll do!
Thank you!
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Dyad II or New Concept Double Blade Folder?
I know. If it's LC200N I'm in.
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Dyad II or New Concept Double Blade Folder?
If it has LC200N it will match my post from a thread long ago... which would make me a WIZARD! lol
I'll buy it no matter the steel though.
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Dyad II or New Concept Double Blade Folder?
One advice from me ... make it light... make it FRN
Marius
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
Re: Dyad II or New Concept Double Blade Folder?
Noooooooo..... Give it nice titanium or CF scales.
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Dyad II or New Concept Double Blade Folder?
I'll be happy with G10. It is more of a working tool after all.
Although a compression frame lock in titanium would be cool!
I prefer strength over light. If you want light, get a Dyad Jr.
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
Re: Dyad II or New Concept Double Blade Folder?
G10 - still fine by me. :) Just please no lw... Go get a Dyad Jr. if you must have it light.
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Dyad II or New Concept Double Blade Folder?
Hi Archangel,
New steel. Cow dung with Nitrogen added. We call it "DungijiN"/ Just kidding
I could do LC.
FRN tooling is expensive and we like to kwow if there will be demand. Now G-10 slab or machined scales are so expensive that how to make a model and what to make it out of requires much thought.
sal
New steel. Cow dung with Nitrogen added. We call it "DungijiN"/ Just kidding
I could do LC.
FRN tooling is expensive and we like to kwow if there will be demand. Now G-10 slab or machined scales are so expensive that how to make a model and what to make it out of requires much thought.
sal
Re: Dyad II or New Concept Double Blade Folder?
FRN tooling is expensive, and G10 is expensive. So now are they both out of the race?
LC200N yessss....
LC200N yessss....
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Dyad II or New Concept Double Blade Folder?
Wait! I want to hear more about this "DungijiN"!
:P
So what's more expensive Ti or G10? I'll take either and have cleared out a spot in my pocket for either. :)
:P
So what's more expensive Ti or G10? I'll take either and have cleared out a spot in my pocket for either. :)
"If a law is unjust, a man is not only right to disobey it, he is obligated to do so."
-Thomas Jefferson
-Thomas Jefferson
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Dyad II or New Concept Double Blade Folder?
This is sounding good Sal. I'll be looking forward to seeing this if the project continues!
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
Re: Dyad II or New Concept Double Blade Folder?
It's been ongoing for quite a while. We've already made about half dozen prototypes over the past 5 or 6 years. The original model was a double Reeve Integral lock and was to be H1. We couldn't machine the ramps well because of the work hardening nature of H1. Then we made one in VG-10. Like the first one, it had stainless Integral locks. No scales, just steel. After it was all said and done, it was gonna retail for about $350+ and we felt there was no path to success. Then we picked it up again about 2 years ago and made some design changes which required a bunch of R&D ( we think it's a patentable idea ) and now we're on our 3rd proto made in Golden.
sal
sal
Re: Dyad II or New Concept Double Blade Folder?
FRN Tooling is expensive, but once we know there is demand, but the per part cost is much less. The last proto is G-10 with nested liners/locks. Now that I think I've got the basic design nailed down, I've got to figure out where to make it and what materials to use. Price is a big issue, as you may have seen some of the recent threads on our pricing. I still have to make another proto with 2 changes.
If we can't get it viable price-wise, then it goes into the "What might have been" box.
The Shaman ended up costing much more to make than anticipated and it was still difficult, so we're back to planning.
Re: Dyad II or New Concept Double Blade Folder?
Those two posts sure show how long a timeframe it takes to get to market and costs involved.
I’ve looked at getting molds made for FRN type material, certainly not cheap.
I’ve looked at getting molds made for FRN type material, certainly not cheap.
3 x Endura 1 SE, 1 x Endura ? CE and a Black Pacific Salt. Want Aqua Salt, Fish Hunter and a Pacific Salt Yellow.
-
- Member
- Posts: 5860
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Dyad II or New Concept Double Blade Folder?
sal wrote: ↑Sat Jan 12, 2019 5:08 pmIt's been ongoing for quite a while. We've already made about half dozen prototypes over the past 5 or 6 years. The original model was a double Reeve Integral lock and was to be H1. We couldn't machine the ramps well because of the work hardening nature of H1. Then we made one in VG-10. Like the first one, it had stainless Integral locks. No scales, just steel. After it was all said and done, it was gonna retail for about $350+ and we felt there was no path to success. Then we picked it up again about 2 years ago and made some design changes which required a bunch of R&D ( we think it's a patentable idea ) and now we're on our 3rd proto made in Golden.
sal
Excellent!
I'll put in my vote for LC200N steel, but even VG-10 would be hard to refuse.
If this turns out to be a full Salt model I'll definitely buy it.
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
Re: Dyad II or New Concept Double Blade Folder?
That's why it's so much more profitable to just copy a design once it's perfected. "It is a wise man that copies a successful man so that he too can be successful".
sal
-
- Member
- Posts: 6945
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas