DLT Cruwear Endela
DLT Cruwear Endela
I haven’t seen this posted yet so I thought that I would put it out there. I am pretty excited about this one. It will be my first Endela and in a combo that I really like.
https://www.dlttrading.com/spyderco-end ... wear-blade
https://www.dlttrading.com/spyderco-end ... wear-blade
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
-
- Member
- Posts: 642
- Joined: Tue Jun 27, 2017 8:32 am
- Location: Pacific Northwest
Re: DLT Cruwear Endela
I love the color combo, but I'm not sold on Cru-Wear. I could look up how awesome Cru-Wear is, or just post it here.
Justin
Re: DLT Cruwear Endela
crazywednesday wrote: ↑Fri Feb 10, 2023 5:03 pmI love the color combo, but I'm not sold on Cru-Wear. I could look up how awesome Cru-Wear is, or just post it here.
Cruwear isn’t my favorite steel but I like it, and like you, I like the color combo. I am sure there are plenty of people on the board willing to offer up greater praises for Cruwear to you than me.
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
Re: DLT Cruwear Endela
a lot of people have been waiting for the endura, since this combo predates the endela. i wish it was an endura wharncliffe.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: DLT Cruwear Endela
I'll end up getting one of these. Not sure what's not to like about Cru-Wear? I find it easy to sharpen, and having good (not super) edge retention and better corrosion resistance than say K390. I could do without the coating but love the Endela and don't dislike Cru-Wear.
Re: DLT Cruwear Endela
Count me in. It will go with the Dragonfly they released a while ago.
Love the color combo and Cruwear is a great blade steel.
Love the color combo and Cruwear is a great blade steel.
Re: DLT Cruwear Endela
The Endela is a really excellent knife. This is another sweet variation.
However, I have the basic VG10 Rockjumper and Endela to compare, and the Rockjumper/leafjumper is just a better model for me. I’d be much more likely to go for variations of those and that is going to keep me from this.
However, I have the basic VG10 Rockjumper and Endela to compare, and the Rockjumper/leafjumper is just a better model for me. I’d be much more likely to go for variations of those and that is going to keep me from this.
rex121 is the king of steel, but nature’s teeth have been cutting for hundreds of millions of years and counting :cool:
Re: DLT Cruwear Endela
Bring on the Endura and Police versions.
Re: DLT Cruwear Endela
Uncoated Endura would be a buy. Something about blacked out blades doesn’t work for me. I only have one DLC blade.
-
- Member
- Posts: 608
- Joined: Sun Apr 14, 2019 7:56 pm
Re: DLT Cruwear Endela
I'd rather have the endura in this combo, c'mon Dlt hook it up!...I think they did a delica a while back so hopefully an endura is in the works!......
Re: DLT Cruwear Endela
The "Delivered and Upcoming" thread says this knife has a TiCN coating. I haven't seen that before, usually just cerakote or DLC.
I think I remember Eric mentioning testing a new coating. Is this it?
I think I remember Eric mentioning testing a new coating. Is this it?
- Richard
Re: DLT Cruwear Endela
can't wait for the endura!
but I will probably buy this Endela cuz I already have the Delica...
but I will probably buy this Endela cuz I already have the Delica...
Last edited by prndltech on Wed Mar 01, 2023 9:54 pm, edited 1 time in total.
- Shannon
MNOSD 0006
MNOSD 0006
Re: DLT Cruwear Endela
im sure it will be the same as all Seki knives, just like the Delica run. TiCn.
- Shannon
MNOSD 0006
MNOSD 0006
Re: DLT Cruwear Endela
TiCN is the coating used on knives made in Japan and Taiwan. DLC is used on Golden made knives. I don’t think Spyderco uses Cerakote on their knives but I could be forgetting something at the moment.
- Nick
Re: DLT Cruwear Endela
I like Cruwear pretty well, dig the color and price and my only endela is a kind of fugly zome, I'll probably get this one.
Re: DLT Cruwear Endela
Thanks, Shannon and Nick. The GB2 and CF Chaparral are the only Japan or Taiwan made knives I have. Neither blade is coated, so TiCN is a new one to me.
- Richard
Re: DLT Cruwear Endela
Ah ****, there goes my knife budget.
Re: DLT Cruwear Endela
#theriskyoutakevrytimeyoulogintothisforum
Last edited by prndltech on Fri Feb 10, 2023 10:13 pm, edited 1 time in total.
- Shannon
MNOSD 0006
MNOSD 0006
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: DLT Cruwear Endela
heck yes!! been waiting on this one forever!! woohoo!!!!
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!