Custom Shop?
-
- Member
- Posts: 156
- Joined: Mon Nov 22, 2021 10:59 pm
Custom Shop?
I’m sure this question has been asked in the past, but searched a bit and didn’t see it, so I’ll just ask: What are the odds we’ll ever see Spyderco offering ‘build-your-own’ or other forms of in house customization options the way some other American knifemakers do for certain of their models?
I’d be quite interested in it, I can tell you that much
I’d be quite interested in it, I can tell you that much
Re: Custom Shop?
I’m surprised that you searched for this topic and found nothing! This is brought up a couple times a year at least, there are many threads discussing it.
Odds of a Spyderco custom shop happening are very low. (At least, that always seems to be consensus from these threads.)
From what I’ve heard, Spyderco has been looking to expand their Golden facility. If a Spyderco custom shop were to ever happen, I think it would be a very careful decision after that supposed expansion.
Odds of a Spyderco custom shop happening are very low. (At least, that always seems to be consensus from these threads.)
From what I’ve heard, Spyderco has been looking to expand their Golden facility. If a Spyderco custom shop were to ever happen, I think it would be a very careful decision after that supposed expansion.
- Nick
Re: Custom Shop?
I bet it comes up at least once a year.
If I could just get Spyderco factory ground serrations, I would be ecstatic. I just can't bring myself to trust anyone else to do it right. I can understand Spyderco not taking the risk to make every knife in a SE variant, but if they could offer a service cutting serrations in any knife I send them, they'd make just as much money off me that way as they do from knife purchases. I would probably give them enough business to justify the service all by myself lol.
If I could just get Spyderco factory ground serrations, I would be ecstatic. I just can't bring myself to trust anyone else to do it right. I can understand Spyderco not taking the risk to make every knife in a SE variant, but if they could offer a service cutting serrations in any knife I send them, they'd make just as much money off me that way as they do from knife purchases. I would probably give them enough business to justify the service all by myself lol.
All SE all the time since 2017
~David
~David
Re: Custom Shop?
Just typing "custom shop" in advanced search and limiting it to thread titles yields results, the most recent one from April this year.
viewtopic.php?f=2&t=89272
viewtopic.php?f=2&t=86574
viewtopic.php?f=2&t=85703
viewtopic.php?f=2&t=89272
viewtopic.php?f=2&t=86574
viewtopic.php?f=2&t=85703
-
- Member
- Posts: 156
- Joined: Mon Nov 22, 2021 10:59 pm
Re: Custom Shop?
Hey, there's that rabbit hole of past discussion I was looking for! I figured it had to be there, looks like if I'd looked a little harder I'd have found it myself.
At least I'm not the only one who'd want such a thing. The truth is I'm fine without it but I'm more thinking of people who aren't comfortable voiding their own warranties but still would like to get in on a little individualization of their daily carry.
At least I'm not the only one who'd want such a thing. The truth is I'm fine without it but I'm more thinking of people who aren't comfortable voiding their own warranties but still would like to get in on a little individualization of their daily carry.
- Manixguy@1994
- Member
- Posts: 12909
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: Custom Shop?
Thank you. , Mikey177 , pretty much explains to me everything I would need to know on this subject . MG2mikey177 wrote: ↑Thu Dec 23, 2021 6:51 pmJust typing "custom shop" in advanced search and limiting it to thread titles yields results, the most recent one from April this year.
viewtopic.php?f=2&t=89272
viewtopic.php?f=2&t=86574
viewtopic.php?f=2&t=85703
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Re: Custom Shop?
Manixguy@1994 wrote: ↑Thu Dec 23, 2021 7:24 pmThank you. , Mikey177 , pretty much explains to me everything I would need to know on this subject . MG2mikey177 wrote: ↑Thu Dec 23, 2021 6:51 pmJust typing "custom shop" in advanced search and limiting it to thread titles yields results, the most recent one from April this year.
viewtopic.php?f=2&t=89272
viewtopic.php?f=2&t=86574
viewtopic.php?f=2&t=85703
You're welcome, ManixGuy.
Re: Custom Shop?
oh man... one of them was me.
i still think it would be great if we could get custom combinations of pieces already regularly available. like a black blade pacific salt with yellow handles... or a spy27 manix with g10... there's nothing custom about that except the construction. all the pieces are already there.
i still think it would be great if we could get custom combinations of pieces already regularly available. like a black blade pacific salt with yellow handles... or a spy27 manix with g10... there's nothing custom about that except the construction. all the pieces are already there.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
-
- Member
- Posts: 6949
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Custom Shop?
I read the thread title and thought "has it been six months already?"
-
- Member
- Posts: 156
- Joined: Mon Nov 22, 2021 10:59 pm
Re: Custom Shop?
Man that was some good info. Y’all got into it.
How’s this scenario sound: Spyderco brings back or introduces a model for a Spyderworks release. Say, the Worker, or the Kiwi, or the Warrior, or whatever they feel like bringing back. They do this first Spyderworks release much like a Kickstarter complete with preordering and stretch goals reflecting economies of scale, plan their run, offer whatever is left over from covering preorders for sale at SFO, and then take stock and see how that worked. If there’s a good response then iterate and try it again.
I’d also be down for trying it through a ‘related’ enterprise, like having 5x5 have a Yojimbo configurator.
How’s this scenario sound: Spyderco brings back or introduces a model for a Spyderworks release. Say, the Worker, or the Kiwi, or the Warrior, or whatever they feel like bringing back. They do this first Spyderworks release much like a Kickstarter complete with preordering and stretch goals reflecting economies of scale, plan their run, offer whatever is left over from covering preorders for sale at SFO, and then take stock and see how that worked. If there’s a good response then iterate and try it again.
I’d also be down for trying it through a ‘related’ enterprise, like having 5x5 have a Yojimbo configurator.
Re: Custom Shop?
Haha! My first thought was "here we go again..."yablanowitz wrote: ↑Thu Dec 23, 2021 7:44 pmI read the thread title and thought "has it been six months already?"
Of all the things I've lost I miss my mind the most!
-
- Member
- Posts: 6949
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Custom Shop?
I still think if it happens they need to replace the Bug with a snowflake.
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: Custom Shop?
As long as people keep buying up every single sprint and dealer exclusive of the same three knives in new colors, and Spyderco continues to be operating at max capacity, there isn't much incentive to add a custom shop. They're already selling as many knives as they can produce.
Now, if sales start to slow or the upcoming expansion adds capacity that isn't being fully utilized, then they might see some incentive to branch out. But for now, they seem to be happy to let the aftermarket fill the customization void.
Now, if sales start to slow or the upcoming expansion adds capacity that isn't being fully utilized, then they might see some incentive to branch out. But for now, they seem to be happy to let the aftermarket fill the customization void.