Page 19 of 27

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Fri Sep 14, 2018 6:08 pm
by Sumdumguy
Well it's official, I am now an accidental owner via forgotten pre order.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Fri Sep 14, 2018 6:27 pm
by grg
Optic planet is shipping pre-orders .

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Fri Sep 14, 2018 6:51 pm
by Jefft51
I ordered from Optic Planet on the 12th (they were out of stock at this point). I wrote to them to see if they would be able to cover my order.
From their response a short while ago: " We should be able to cover your order, but it appears that the ETA will be near the middle of October."
I hope this is true. It seems the knives are being released a few at a time to each retailer.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Fri Sep 14, 2018 7:23 pm
by SF Native
Jefft51 wrote:
Fri Sep 14, 2018 6:51 pm
I ordered from Optic Planet on the 12th (they were out of stock at this point). I wrote to them to see if they would be able to cover my order.
From their response a short while ago: " We should be able to cover your order, but it appears that the ETA will be near the middle of October."
I hope this is true. It seems the knives are being released a few at a time to each retailer.
Thanks Jeff. I ordered from them on the 8th, like a lot of people. Glad to hear they think they can fill the orders.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sat Sep 15, 2018 10:11 am
by Sharp Guy
I decided to measure the thickness behind the edge on Jr this morning. It measured .013" right on the shoulder. That would make it one of the thinnest BTE of all the Spydies I have. Only the Baby Jess Horn and Chaparrals are lower.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 2:49 pm
by Hgwxx7
Sharp Guy wrote:
Sat Sep 15, 2018 10:11 am
I decided to measure the thickness behind the edge on Jr this morning. It measured .013" right on the shoulder. That would make it one of the thinnest BTE of all the Spydies I have. Only the Baby Jess Horn and Chaparrals are lower.
Oh, that is interesting! The spine looked fatter than the Delica, but I'm excited to see that it's still pretty thin BTE. Looks like a very slicey boi, glad to see that confirmed.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 2:54 pm
by GarageBoy
The Calypso Jr was the original slicey Spyderco - I'd take a slightly cqi version in almost any steel

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 5:09 pm
by Sumdumguy
I'm afraid to take it out of the box.

I just know my pocket will make it rust. :(

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 5:26 pm
by buccilli15

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 5:34 pm
by Wright.88
buccilli15 wrote:
Sun Sep 16, 2018 5:26 pm
Going Gear has them!
http://goinggear.com/spyderco-sprint-ru ... r-pin.html

Finally got one! Thanks for the heads up!!

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 5:35 pm
by buccilli15
Wright.88 wrote:
Sun Sep 16, 2018 5:34 pm
buccilli15 wrote:
Sun Sep 16, 2018 5:26 pm
Going Gear has them!
http://goinggear.com/spyderco-sprint-ru ... r-pin.html

Finally got one! Thanks for the heads up!!
Woo! :D

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 5:49 pm
by DrawBackwards
...and they’re out. Thanks for the info though - one of these times... :)

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 6:07 pm
by s00noma
Dang it! I've been a few minutes too late EVERY time. Lol.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 6:13 pm
by Joey
I just ordered one, got confirmation too!

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Sun Sep 16, 2018 6:35 pm
by Sharp Guy
I would expect these to keep trickling out for awhile. In the Caly 3 thread Sal confirmed that the Calypso Jr is coming is small batches. The Caly 3 HAP40 sprint run was the same way. For those waiting for one of these, be patient and keep your eyes peeled. Hopefully you'll get one.
sal wrote:
Sat Sep 15, 2018 4:16 pm
Edited....At this time, I don't think the maker can get the Compression lock down. They're getting better, but not there yet. They are also a small shop and capacity for Spyderco is not very large. That's why sprits like the latest Caly jr come in batches.

sal

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Mon Sep 17, 2018 1:29 am
by RadioactiveSpyder
brj wrote:
Thu Sep 13, 2018 2:53 am
Just got mine, too bad I have disregarded the Calypso line until now cause this is nothing short of fantastic...
RadioactiveSpyder wrote:
Sun Sep 09, 2018 12:19 pm
My only quibble so far is that the rear end of the spine of the blade (behind the jimping) does not line up with the lockbar when it’s in the open position.
Like this?

Image
Yup, that’s it. Are other folks’ ones like this? Not that it’s a big deal but in looking at my other Calypso Jrs., none share this issue (there’s a smooth continuation from lockbar to blade spine, certainly nothing like this recent sprint).

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Mon Sep 17, 2018 8:04 am
by The Meat man
RadioactiveSpyder wrote:
Mon Sep 17, 2018 1:29 am
brj wrote:
Thu Sep 13, 2018 2:53 am
Just got mine, too bad I have disregarded the Calypso line until now cause this is nothing short of fantastic...
RadioactiveSpyder wrote:
Sun Sep 09, 2018 12:19 pm
My only quibble so far is that the rear end of the spine of the blade (behind the jimping) does not line up with the lockbar when it’s in the open position.
Like this?

Image
Yup, that’s it. Are other folks’ ones like this? Not that it’s a big deal but in looking at my other Calypso Jrs., none share this issue (there’s a smooth continuation from lockbar to blade spine, certainly nothing like this recent sprint).

Yes, that's how mine is too.

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Mon Sep 17, 2018 8:24 am
by SG89
Mine is like that. For what is worth I can also middle finger flick it open and I can't do that with other backlocks

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Mon Sep 17, 2018 9:15 am
by RadioactiveSpyder
Interesting... And I mistakenly said jimping in my first post, which is obviously incorrect since there’s none on the thumb ramp. :D

Whatever little nitpicks I have are greatly overshadowed by how awesome this sprint is and how happy I am that Sal gave us another iteration in such a great steel after so many years. A dark green one with HAP40 would fly off the shelves too! ;)

Re: Spyderco Calypso Jr. Sprint Run Knife Gray (Aogami Super Blue)

Posted: Mon Sep 17, 2018 9:24 am
by MichaelScott
Looks very cool. Flying off the shelves is the biggest problem!