BM 525 question?
BM 525 question?
love my benchmade mini presidio, but it's got just one problem: The pivot is either just too tight to open or has bladeplay... I find that even when tightened it still has a little horizontal play... the design of the knife kinda points to this being a normal thing though.. the pivot is the only thing holding the knife there: there's space between the blade and the handles... should I email them or something?
-
- Member
- Posts: 1144
- Joined: Thu Sep 27, 2007 2:51 pm
- Location: South Africa Capetown
- jimbo@stn24
- Member
- Posts: 455
- Joined: Thu Oct 28, 2004 5:33 pm
- Location: Alberta Rockies
Hi Casey,
have you checked the other handle screws to make sure they are properly tightened? Just wondering if you loosen the pivot bolt, and then ensure the other screws are snugged up to ensure squareness of the knife frame, and then adjusted pivot tension, you might have better pivot consistency.
Just an idea and I hope this helps. Other than that, as already suggested, back to Benchmade for an inspection and adjustment.
have you checked the other handle screws to make sure they are properly tightened? Just wondering if you loosen the pivot bolt, and then ensure the other screws are snugged up to ensure squareness of the knife frame, and then adjusted pivot tension, you might have better pivot consistency.
Just an idea and I hope this helps. Other than that, as already suggested, back to Benchmade for an inspection and adjustment.
WTC #1455