Spyderco Forums

Bolstered Persian 75mm with no screws showing, please. In something other than VG10 if possible. Caly JR in micarta and a more modern steel. Jess Horn with bolsters and micarta. Oops, cannot count to two. :o

I wouldn’t mind seeing an updated and improved Starmate, maybe in LC200N. Possibly even with a different lock(?).

Jim

Terzuola Slipit

Bradley Air

Bob Terzuola & Bob Terzuola Jr. :p

T-Mag with a different take on the magnet implementation
Wharnie Bi-fold

Phoenix, as originally was, or raffir noble (a brighter one than the chap has, maybe yellow or red tint) and a nice steel.
Any Ed Schempp design, which it seems a lot of people are coming to appreciate lately.

Bradley Air (with a clip this time to mix it up!)
CF Caly 3 ZDP

adding my vote for an updated Kris with better steel and screw construction.

Wouldn't mind an updated Persian either...

Pancake wrote: ↑

Tue Dec 17, 2019 1:23 pm

As for second pick I choose Massad Ayoob....in full SE, just cuz

It makes my soul feel good to hear more and more people wanting to see the return of the C-60 Ayoob model. And I really don't care what variants they call for either. As long as they are improvements with newer/better materials.

The C-60 Ayoob is a beast in both edge types. But I distinctly remember our old Brother "Doc Snubnose" said that he did a meat cutting test with his Spyderedged version of the Ayoob model and he said the results were astounding.

Yeah the C-60 Ayoob in SE & PE along with some upgraded materials. Could you all imagine an Ayoob model in M390 or maybe even some Japan supersteel??

curlyhairedboy wrote: ↑

Wed Dec 18, 2019 9:51 am

adding my vote for an updated Kris with better steel and screw construction.

Wouldn't mind an updated Persian either...

The KRIS is among about 3 recurve models that I would really love to see brought back again>> and also to start making these recurve models available in Spyderedge as well as plain edge. I can only imagine what kind of cutting machines that the KRIS, ULIZE & SPYKER models would all be like in SE :cool:

JD Spydo wrote: ↑

Wed Dec 18, 2019 9:56 am

Yeah the C-60 Ayoob in SE & PE along with some upgraded materials. Could you all imagine an Ayoob model in M390 or maybe even some Japan supersteel??

Not sure how well could Spyderedge goes with some steels. Spyderco done it with H1, VG10, S30V, BD1N, 8cr13mov and LC200N, not sure how well it could go with something like M390.....but I am sure that Glesser and crew can make it work with some other steels as well.

Micheal Walker and Persian for me.

Pancake wrote: ↑

Wed Dec 18, 2019 10:11 am

JD Spydo wrote: ↑

Wed Dec 18, 2019 9:56 am

Yeah the C-60 Ayoob in SE & PE along with some upgraded materials. Could you all imagine an Ayoob model in M390 or maybe even some Japan supersteel??

Not sure how well could Spyderedge goes with some steels. Spyderco done it with H1, VG10, S30V, BD1N, 8cr13mov and LC200N, not sure how well it could go with something like M390.....but I am sure that Glesser and crew can make it work with some other steels as well.

OH they could make the Spyderedged version in VG-10 and I wouldn't mind because I've had great luck using all my VG-10 blades in SE. VG-10 is one Steel I've had good results in PE & SE both. But for a C-60 Ayoob in PE I would want a Supersteel like M390, M-4, S110V, 10V ect.

Leafstorm with M4! Could be a good one as a BladeHQ exclusive.

Rookie with K390 - Been asking for this one for a while now as well! Would make a cool set with the Police 4, in my opinion.

And for the sake of keeping hopes up, the JESTER!!! Lets hope 2020 is the year of the Jester!

Been asking for years and still asking

KRIS in any configuration of steel and handle material. Preferably a linen Micarta or bone/horn/whatever.

Darn Dao in CPM 3V. Make another flash batch. I think a chopper deserves a steel like 3V. I bought 2 of the originals and I'd buy it in 3V too.

JMM wrote: ↑

Tue Dec 17, 2019 8:11 pm

Ulize & Ayoob, in K390, Rex45, or Cruwear.

An awesome suggestion Brother!! I hope your idea grows legs and goes forward. I could really go for both models if they would offer them up in PE & SE both as well as PE.

If most of the relative newcomers to the Spyderco addiction would get a chance to test drive the C-60 Ayoob model there would be a massive amount of people begging for the re-introduction of the C-60 Ayoob and the ULIZE both.

Air and Gayle Bradley in 20CV.
C15 Bob Terzuola

Rookie serrated
Barong

toocool006 wrote: ↑

Wed Dec 18, 2019 9:45 am

Bradley Air (with a clip this time to mix it up!)
CF Caly 3 ZDP

The lack of clip is probably why I never pulled the trigger on the air and missed out. If it came around again I'd get it regardless, but a clip would be outstanding.

p_atrick wrote: ↑

Tue Dec 17, 2019 10:45 am

How about a Franken-Return? I like the Wayne Goddard design, but I want the micarta from the first editions and the full-flat grind and Boye dent of the later models.

This would be my dream. At least we know two would get sold :D