The only odd thing, or consistent, was that many dealers seemed to have only 5 to sell.GeezyG wrote: ↑Thu Dec 22, 2022 1:35 pmSprint Runs are supposed to be 1 & done. Meaning, however many are manufactured for the run is it. Whether distributors dribble them out or drop their allotment at once, whatever was made, that's it. Distributor exclusives kinda follow same suit but they reserve the right to make a 2nd or 3rd run. Probably depending on popularity.WilliamMunny wrote: ↑Thu Dec 22, 2022 1:23 pmFor what it's worth REC posted on their Facebook page that they did not get their "full" order of Manix knifes. They were debating on waiting until they had more to release or to sell what they had.
It sounds like they made so many, distributed them. Not sure if they will make more to give out for a second round or not. I would love to know how many they are making overall.
CPM 15v Manix 2
- WilliamMunny
- Member
- Posts: 1203
- Joined: Fri Jan 29, 2021 1:20 pm
Re: CPM 15v Manix 2
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: CPM 15v Manix 2
This is certainly a tough one. I have gotten various email notices of being in stock, but I think you have to respond to the beep on your phone and get there in seconds or they are out of stock. If I had my phone set up to beep on every email arrival, I would go crazy. It just ain't worth it. I'm almost tempted to give business to the Ebay scalpers, but I really don't NEED another Manix 2. But this is certainly a nice one, an interesting steel, and a great price (in theory at least, for those clever enough to snag one).
Re: CPM 15v Manix 2
Doesn't help even management makes unnecessary comments in the alert threadTucson Tom wrote: ↑Thu Dec 22, 2022 2:33 pmThis is certainly a tough one. I have gotten various email notices of being in stock, but I think you have to respond to the beep on your phone and get there in seconds or they are out of stock. If I had my phone set up to beep on every email arrival, I would go crazy. It just ain't worth it. I'm almost tempted to give business to the Ebay scalpers, but I really don't NEED another Manix 2. But this is certainly a nice one, an interesting steel, and a great price (in theory at least, for those clever enough to snag one).
I assume people comment in that thread because their phone doesn't beep every time someone comments. Thankfully I've got my 2 already and don't get woken up by people commenting up the alert thread at 6am.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: CPM 15v Manix 2
you can set up a beep for the alerts?! i have no idea how to internet apparently.
smkw had them in stock for long enough for me to order, comment here, and then go back and see them still in stock a little later. maybe the demand is slowing down finally and it will be easier to get them from now on. who knows how many we can still expect to show up though.
smkw had them in stock for long enough for me to order, comment here, and then go back and see them still in stock a little later. maybe the demand is slowing down finally and it will be easier to get them from now on. who knows how many we can still expect to show up though.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: CPM 15v Manix 2
Who ever said this was an alert thread? The first posting simply says:
"Lets just start a thread to talk about it."
I suppose people who have somehow set this up to alert them have begun to use it as such..... I wonder how that works.
"Lets just start a thread to talk about it."
I suppose people who have somehow set this up to alert them have begun to use it as such..... I wonder how that works.
Re: CPM 15v Manix 2
There’s another thread specifically for alerts.Tucson Tom wrote: ↑Thu Dec 22, 2022 3:30 pmWho ever said this was an alert thread? The first posting simply says:
"Lets just start a thread to talk about it."
I suppose people who have somehow set this up to alert them have begun to use it as such..... I wonder how that works.
viewtopic.php?f=2&t=93745
MRj “Weak things break!”
#0048
#0048
- cabfrank
- Member
- Posts: 2910
- Joined: Sun May 08, 2011 9:07 pm
- Location: Northern California, USA, Earth
Re: CPM 15v Manix 2
If supply catches up with demand, I may try one. I don't currently have a Manix, and this one looks great. I don't think I'd do well sharpening it though, but then again it probably wouldn't need it for quite some time.
Re: CPM 15v Manix 2
They were in stock at SMKW this morning for about an hour. Most drops have lasted about 10 minutes.
Re: CPM 15v Manix 2
Every Spyderco AD gets a qty of 5 for sprint runs. Whether they get more, and how many, depends on the size of the run and demand from dealers (The size of the dealer and how many each dealer requested plays into how they get distributed).WilliamMunny wrote: ↑Thu Dec 22, 2022 1:45 pmThe only odd thing, or consistent, was that many dealers seemed to have only 5 to sell.GeezyG wrote: ↑Thu Dec 22, 2022 1:35 pmSprint Runs are supposed to be 1 & done. Meaning, however many are manufactured for the run is it. Whether distributors dribble them out or drop their allotment at once, whatever was made, that's it. Distributor exclusives kinda follow same suit but they reserve the right to make a 2nd or 3rd run. Probably depending on popularity.WilliamMunny wrote: ↑Thu Dec 22, 2022 1:23 pmFor what it's worth REC posted on their Facebook page that they did not get their "full" order of Manix knifes. They were debating on waiting until they had more to release or to sell what they had.
It sounds like they made so many, distributed them. Not sure if they will make more to give out for a second round or not. I would love to know how many they are making overall.
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
Re: CPM 15v Manix 2
You sure can!
First go to the thread you want to follow and open it and scroll to the bottom of the thread and look for the Wrench Icon.
Open that up and click "Subscribe to topic"
Next youre going to want to go to your 'User Control Panel'...
Under the 'Profile' tab select 'Edit Account Settings' and where it says EMAIL enter your Email address.
Next go to the 'Board Preferences' tab and select 'Edit notification options'
Scroll on down to the section that says "Someone replies to a topic to which you are subscribed" and be sure to check the notification and email Boxes.
Now you should receive an email when ever someome replies to the Alert thread (or any topic you subscribe to).
The next step can vary depending on your phone, but generically if you use an app like Outlook for your email. Long press the app icon on your phone, go to the notification settings and set it to alert you with the ringtone of your choice when you receive an email.
Now you will get an alert not only for all your junk emails, but for every time someone replies to the alert thread! I recommend turning this off after you score your knife.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: CPM 15v Manix 2
Wow! Thanks for all of that. And explained in enough detail that even I can manage it!!
I suppose that I could subscribe thusly to both this thread as well as the "official" alert thread.
Thanks, and wish me luck.
I suppose that I could subscribe thusly to both this thread as well as the "official" alert thread.
Thanks, and wish me luck.
Re: CPM 15v Manix 2
thanks for the tips. i just found out about the wrench from earlier in this drop. previously, i thought you had to post a reply and request to be notified of subsequent responses. i'm already set up for email notifications too. i just didn't realize people were setting up their emails to ring on their phones. that would drive me insane... i never have noises turned on on my phone and i get too many emails every day to have something like that on. i'll just keep checking back throughout the day like i have been.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: CPM 15v Manix 2
Ya it does drive you nuts. But it did help me score 2 BBB Manix(s).
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: CPM 15v Manix 2
Good luck and happy hunting!Tucson Tom wrote: ↑Thu Dec 22, 2022 4:09 pmWow! Thanks for all of that. And explained in enough detail that even I can manage it!!
I suppose that I could subscribe thusly to both this thread as well as the "official" alert thread.
Thanks, and wish me luck.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: CPM 15v Manix 2
Thank you Z!!! I could never get mine to work...I was missing the double box check under 'edit notification options'! Thanks again!
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: CPM 15v Manix 2
Happy to help.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: CPM 15v Manix 2
OK, success.
Thanks to all who helped. I took my first look at the alert thread, it mentioned a 199 offer from an Ebay seller with 100 percent feedback and claiming to be an "authorized reseller" and jumped on it. Free shipping. Someone came into the thread to say the seller was legit for him on a prior sale.
Ebay tells me it is "on the way"
199 is a minor premium over the retail price, but much better than the 299 scalper prices.
So I'll say thanks here rather than abusing the alert thread.
Thanks to all who helped. I took my first look at the alert thread, it mentioned a 199 offer from an Ebay seller with 100 percent feedback and claiming to be an "authorized reseller" and jumped on it. Free shipping. Someone came into the thread to say the seller was legit for him on a prior sale.
Ebay tells me it is "on the way"
199 is a minor premium over the retail price, but much better than the 299 scalper prices.
So I'll say thanks here rather than abusing the alert thread.
Re: CPM 15v Manix 2
Mine arrived today. Fit and finish are perfect and it's razor sharp. Looking forward to putting it to the test as my new EDC.
Re: CPM 15v Manix 2
Yea I had a good experience buying from that seller. He was very open and quick to respond when I asked him a question. The knife was well packaged (better than most ebay sellers I've encountered) and shipped quickly.Tucson Tom wrote: ↑Thu Dec 22, 2022 5:21 pmOK, success.
Thanks to all who helped. I took my first look at the alert thread, it mentioned a 199 offer from an Ebay seller with 100 percent feedback and claiming to be an "authorized reseller" and jumped on it. Free shipping. Someone came into the thread to say the seller was legit for him on a prior sale.
Ebay tells me it is "on the way"
199 is a minor premium over the retail price, but much better than the 299 scalper prices.
So I'll say thanks here rather than abusing the alert thread.
A bit of a shame it's marked up, but it's a better price than the rest of the 15V for sale there.
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
Re: CPM 15v Manix 2
Mine also arrived, but the secondary bevel is HUGE on the show side. I’m going to try for another, hoping for a smaller BTE, since I’m not willing to pay for a pricey regrind.
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.