Rust removal without scratching blade

Discuss Spyderco's products and history.
User avatar
Strong-Dog
Member
Posts: 703
Joined: Sat Dec 14, 2013 7:49 pm
Contact:

Rust removal without scratching blade

#1

Post by Strong-Dog »

I have noticed some rust spotting around the thumbhole of my Gayle Bradley. I have removed rust from other knives in the past with oil and a scotchbrite pad, but it has always left small scratches on the blade. Is there a way to remove the rust without marking the beautiful CPM-M4 blade?
"For a second, I thought I was dead, but when I heard all the noise I knew they were cops. Only cops talk that way. If they had been wiseguys, I wouldn't have heard a thing. I would've been dead."

-Henry Hill
Mike9x19
Member
Posts: 14
Joined: Fri Jan 03, 2014 9:07 pm

#2

Post by Mike9x19 »

I use a buffing wheel and some black or green compound depending on the level of rust. I got my buffing wheel at Harbor Freight on the cheap and it does the job just fine.
User avatar
The Deacon
Member
Posts: 25717
Joined: Fri Sep 24, 2004 10:33 am
Location: Upstate SC, USA
Contact:

#3

Post by The Deacon »

Naval Jelly?
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
User avatar
Strong-Dog
Member
Posts: 703
Joined: Sat Dec 14, 2013 7:49 pm
Contact:

#4

Post by Strong-Dog »

Mike9x19 wrote:I use a buffing wheel and some black or green compound depending on the level of rust. I got my buffing wheel at Harbor Freight on the cheap and it does the job just fine.
Thanks, do you think I could substitute green compound with flitz?
"For a second, I thought I was dead, but when I heard all the noise I knew they were cops. Only cops talk that way. If they had been wiseguys, I wouldn't have heard a thing. I would've been dead."

-Henry Hill
Mike157
Member
Posts: 126
Joined: Sat Nov 27, 2010 5:57 pm
Location: Central California

#5

Post by Mike157 »

I've successfully used something called Super Eraser. I believe I purchased it from Baryonyx Knife Company. It is a small rubber like, rectangular, mildly abrasive block. The package states that it leaves a fine satin finish. I've only used it on very light rust and the blades already had a satin, tumbled, or brushed-like finish so no additional marks were left. I have also used Simichrome and Flitz where appropriate. Mike
WorkingEdge
Member
Posts: 209
Joined: Sun Apr 14, 2013 1:35 am

#6

Post by WorkingEdge »

The Deacon wrote:Naval Jelly?
Did that to my GB last yr. turns the blade darker (as in acid washing). Didn't like the look so have been sanding it off
mattman
Member
Posts: 1443
Joined: Mon Sep 27, 2010 1:06 pm
Location: Central NY

#7

Post by mattman »

Isn't this where many have had success polishing with toothpaste?
User avatar
wrdwrght
Member
Posts: 5078
Joined: Tue Mar 01, 2011 9:35 am

#8

Post by wrdwrght »

I find Flitz slow but gentle.
-Marc (pocketing an M4 Sage5 today)

“When science changes its opinion, it didn’t lie to you. It learned more.”
User avatar
Strong-Dog
Member
Posts: 703
Joined: Sat Dec 14, 2013 7:49 pm
Contact:

#9

Post by Strong-Dog »

mattman wrote:Isn't this where many have had success polishing with toothpaste?
Ill try that, thanks
"For a second, I thought I was dead, but when I heard all the noise I knew they were cops. Only cops talk that way. If they had been wiseguys, I wouldn't have heard a thing. I would've been dead."

-Henry Hill
User avatar
Officer Gigglez
Member
Posts: 801
Joined: Wed Nov 13, 2013 5:22 pm
Location: Originally out of Arizona, currently live in Missouri.

#10

Post by Officer Gigglez »

Try Toothpaste. A wise man on these forums issued that idea.
Spyderco Knives (in order of obtainment):
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
User avatar
Officer Gigglez
Member
Posts: 801
Joined: Wed Nov 13, 2013 5:22 pm
Location: Originally out of Arizona, currently live in Missouri.

#11

Post by Officer Gigglez »

mattman wrote:Isn't this where many have had success polishing with toothpaste?
Yes. I am one. It works pretty **** good.
Spyderco Knives (in order of obtainment):
-Tenacious, Combo edge
-Tasman Salt, PE
-Persistence Blue, PE
-Pacific Salt, Black, PE
-Delica 4, Emerson Grey
-DiAlex Junior
-Byrd SS Crossbill, PE
-Endura 4 Emerson Grey
-Byrd Meadowlark 2 FRN, PE
-Resilience
User avatar
Holland
Member
Posts: 7567
Joined: Fri Jan 06, 2012 10:37 pm
Location: Alberta

#12

Post by Holland »

toothpaste was my first thought as well
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
User avatar
Tally-ho
Member
Posts: 195
Joined: Tue Oct 23, 2012 11:48 am
Location: French Alps, France

#13

Post by Tally-ho »

Strong-Dog wrote:I have removed rust from other knives in the past with oil and a scotchbrite pad, but it has always left small scratches on the blade. Is there a way to remove the rust without marking the beautiful CPM-M4 blade?
Scotchbrite is quite agressive for steel, particulary when it is new, hence it is used to make brushed steel finish.

It is better to replace it with steel wool that is softer than hardened steel, then generally it will not leave scratches. I'm using extra fine grade (#00000) all the time to restore old straight razors (softer steels than M4) or to clean enamel surfaces and never noticed scratches.
Do a test before on a small area.
| C10PGRE + C10FPK390 Endura 4 | C28GPFG Dragonfly | C36TIP Military | C41GP5 Native 5 | C54GPBN Calypso | C65CFP Lum Chinese | C81GPDBL2 PM2 | C90GFPD Strectch | C94TIP UK Penknife | C101PGY2 + C101PBORE2 Manix 2 | C113GPGY Caly 3 | C123TIP Sage 2 | C126GPFG Rock Lobster | C135GP Perrin PPT | C144CFPE Caly 3.5 | C163PBK Pingo | C164GPBN Nilakka || MT16P MT17P MT18P Mule Team |
Mike9x19
Member
Posts: 14
Joined: Fri Jan 03, 2014 9:07 pm

#14

Post by Mike9x19 »

Strong-Dog wrote:Thanks, do you think I could substitute green compound with flitz?
I have never tried it, but I don't see why not. The nice thing about having the polishing wheel is that you can polish other blades after you are done fixing this one.n
CallsThunder
Member
Posts: 9
Joined: Sun Nov 12, 2006 4:24 am

#15

Post by CallsThunder »

A Mr. Clean Magic Eraser works well for me.
User avatar
Strong-Dog
Member
Posts: 703
Joined: Sat Dec 14, 2013 7:49 pm
Contact:

#16

Post by Strong-Dog »

I used toothpaste and a microfiber rag, and it worked brilliantly. Thanks for the idea guys
"For a second, I thought I was dead, but when I heard all the noise I knew they were cops. Only cops talk that way. If they had been wiseguys, I wouldn't have heard a thing. I would've been dead."

-Henry Hill
CanadaDude
Member
Posts: 93
Joined: Wed Oct 30, 2013 6:25 am

#17

Post by CanadaDude »

Baking soda and a wet toothbrush,works perfectly.
User avatar
JNewell
Member
Posts: 5060
Joined: Fri Sep 24, 2004 10:33 am
Location: Land of the Bean and the Cod

#18

Post by JNewell »

WorkingEdge wrote:Did that to my GB last yr. turns the blade darker (as in acid washing). Didn't like the look so have been sanding it off
It's the phosphoric acid. I have had a lot of bad experiences with Naval Jelly. I wouldn't use it on anything other than cast iron pipe, and then only on the inside. ;)
Mike9x19
Member
Posts: 14
Joined: Fri Jan 03, 2014 9:07 pm

#19

Post by Mike9x19 »

Strong-Dog wrote:I used toothpaste and a microfiber rag, and it worked brilliantly. Thanks for the idea guys
Glad to hear it worked out! This is a great place to get some advice.
Post Reply