Tanto blades?

If your topic has nothing to do with Spyderco, you can post it here.
User avatar
gull wing
Member
Posts: 3393
Joined: Fri Sep 24, 2004 10:33 am
Location: Louisiana USA

Tanto blades?

#1

Post by gull wing »

Does anyone have a tanto? How do you use it?
SCARAMOUCHE! :bug-red-white
User avatar
jackknifeh
Member
Posts: 8412
Joined: Fri Jul 09, 2010 6:01 am
Location: Florida panhandle

#2

Post by jackknifeh »

I don't have a tanto blade. If not mistaken they are supposed to be tougher when stabbing someone who is wearing armor. That's about all I've ever heard that they were better than a standard curved edge. As far as I know that is a knights of the roundtable myth. :) However, on many situations I have wanted to scrape something (old glue, paint, etc.) and a flat blade would be better than scraping skinny slivers of it off with my curved, belly edge knife. Every time I see a tanto blade I think of the times I could scrape glass or something like that with the front, flat edge of my EDC tanto blade knife (if I had had one). :) So, how I would use one is only speculation.

Jack
User avatar
sharpguitarist
Member
Posts: 1179
Joined: Sat Mar 13, 2010 11:34 am
Location: east tn.

#3

Post by sharpguitarist »

Hey gull wing,
I have a couple.
An Emerson CQC-7 mini in combo edge, chisel grind, and two CRKT Carson designs.
The Emerson is a heck of a cutter, and a real workhorse.
The CRKT's are traditional hollow grinds.
Tantos are a different animal, and I don't think I would purchase another just because I've cooled on the novelty of them.
But they are functional tools with a lot of tip strength.
These two designs had a more acute edge angle on the tip sections of the blade, supposedly to be more durable for penetration.
I rebeveled mine to around 20 per side so the tips were comparable to the main cutting edge.
This allows me to use the tip section for push cuts somewhat like a chisel.
Later,
Don
Everyone's entitled to their own opinion, even if it is wrong.:rolleyes:
User avatar
The Deacon
Member
Posts: 25717
Joined: Fri Sep 24, 2004 10:33 am
Location: Upstate SC, USA
Contact:

#4

Post by The Deacon »

Have one, a titanium C46 Lum Tanto, but I've never used it. Also have a Katana, which I'd say has a tanto tip, and I've had a lot of fun practicing with it, but only thing I ever cut with it was the living room ceiling in my apartment back in Rensselaer. :o
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#5

Post by Evil D »

I believe my Vallotton is considered a modified tanto.
All SE all the time since 2017
~David
Oofa
Member
Posts: 37
Joined: Tue Jul 24, 2012 8:36 am

#6

Post by Oofa »

I have a Vallotton but I don't consider that a tanto whatsoever. If I'm not mistaken, there are "American Tantos" and "Japanese Tantos". I think the Japanese has a softer, more rounded curve to it than the American version. I have a couple. A Kershaw Brawler with a soft line curve and a mini Grip with a distinct, hard line curve. I don't particularly like the way they look but they are very useful. That front flat part of the blade is something you don't really think you need until you start using it. Then you realize just how handy it is.
User avatar
SpyderNut
Member
Posts: 8431
Joined: Fri Sep 24, 2004 10:33 am
Location: Hoosier Country, USA
Contact:

#7

Post by SpyderNut »

Hi Gull Wing,

I have three or four Tantos (Emerson, SOG, Spyderco, etc.), but my favorite is still my original Ti Lum Tanto. :) (The Lum is more of a safe queen these days, however). As for EDC purposes, I really like the SOG Mini Micron Tanto. It is extremely small and light-weight and carries discreetly in my dress slacks. I didn't think I'd like the Tanto configuration at first, but it's certainly grown on me. I find the Tanto style blade to be very useful for utility purposes around home and at work.
:spyder: -Michael

"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
User avatar
chuck_roxas45
Member
Posts: 8776
Joined: Wed Mar 03, 2010 5:43 pm
Location: Small City, Philippines

#8

Post by chuck_roxas45 »

I had an S&W tanto(SWAT or something) and it was very useful for scraping things off other things. It worked, kinda.
User avatar
Chipped Karambit
Member
Posts: 260
Joined: Thu Aug 23, 2012 5:12 pm
Location: Both sides of SC

#9

Post by Chipped Karambit »

A tantos design is primarily piercing, It cuts as it goes in and goes in smoother and stronger. I have an old tanto with a combo edge that I use primarily as a can opener. Stab then saw then pour
Slash
Member
Posts: 1286
Joined: Tue Feb 15, 2011 8:33 am
Location: SIN CITY

#10

Post by Slash »

American or Japanese?
JD Spydo
Member
Posts: 23532
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

#11

Post by JD Spydo »

The 2 Tanto blades I've owned and used a lot are first and foremost my Spyderco C-46 G-10 handled, black combo edged ATS-55 Lum Tanto folder. It's one of my grail "users" that I do indeed carry and use from time to time. Bob Lum's tanto design is about the only one I've ever used and enjoyed using. His tanto design is streamlined so you can use it efficiently IMO. I also had a tanto fixed blade that I enjoyed using but it either got lost or stolen I don't know which. It was a Cold Steel Kobun made with AUS-8 blade steel. I used it as my watermelon knife for the 2 years I grew a lot of watermelons. It was great for that job and it took a pretty wicked edge although looking back on it I wish I would have gotten the Carbon V version instead of the AUS-8 knowing what I know now.

But as far as being a useful tool I liked Bob Lum's design far and above much better than any other design. Conventional tantos to me are more for mall ninja types who are strictly there for "SHOW" ( show off that is). I also found the Bob Lum Tanto much easier to sharpen.

Having the Bob Lum fixed blade Tanto return as a Sprint run with VG-10 or better blade steel is on my top 5 most wanted Sprint run Spyders.
Long Live the SPYDEREDGE Spyderco Hawkbills RULE!!
User avatar
gull wing
Member
Posts: 3393
Joined: Fri Sep 24, 2004 10:33 am
Location: Louisiana USA

#12

Post by gull wing »

Thank you all.
There may be room in my knife area for a tanto. Thinking getting a 3" one as a beater from the company that is always beating their knives up on utube.
SCARAMOUCHE! :bug-red-white
Sithus1966
Member
Posts: 802
Joined: Thu Apr 01, 2010 9:49 pm
Location: Michigan

#13

Post by Sithus1966 »

The Kershaw RJ1 and RJII have more rounded tanto points as well as opposed to the more straight angle chopped off point.
C05, C05S, C10SRD, C10SBK(x2), C10FPBR, C10GRE, C10FPGR, C11, C11FPBK, C12SBK2, C14 C17 C21, C28BK, C28BK2, C28YL2, C36, C45, C54GPBN, C77, C80GPOR, C81, C81GS, C81GBK2, C85GP2, C86, C86P, C86PET, C90, C94, C95, C106, C109, C116, C122, C123CF, C123, C123GBL, C126(x2), C132GP, C135GP, C136, C137, C138, C140, C142, C146CFP, C148, C158TIP, C161GP, C162, C163PBK, C164GPBN, LBK, LBKII(x2), LYL3HB, LGRE3, MBK, FB20, FB23, FB24SBK, FB31SBK, FBPBK, MT12, MT13, MT16, Woodcraft.
tautisg1
Member
Posts: 23
Joined: Wed Aug 08, 2012 2:28 pm
Location: Essex, UK, Earth

#14

Post by tautisg1 »

Well, since I dont plan on stabbing anyone in the near future, a tanto ain't for me ;) On a serious note, i don't see a use that a tanto could bring, over say, a leaf shaped blade, so I tend to stay away from them.
GCG199
Member
Posts: 130
Joined: Mon Dec 26, 2011 5:52 pm
Location: Manchester, NH

#15

Post by GCG199 »

I have a few Americanized tanto points from Cold Steel and one from Kershaw.

Like most other knife fans, I find them to be geared towards self-defense purposes than every day carry/utility designs.

Wharncliffes and drop points are much better for EDC.
My favorite Spyderco knives include: Caly 3.5, Chaparral, Delica 4 FFG, Stretch, Para-Military 2, Endura 4 FFG, Manix 2 & Manix 2 XL!

TANSTAAFL
User avatar
Chipped Karambit
Member
Posts: 260
Joined: Thu Aug 23, 2012 5:12 pm
Location: Both sides of SC

#16

Post by Chipped Karambit »

tautisg1 wrote:Well, since I dont plan on stabbing anyone in the near future, a tanto ain't for me ;) On a serious note, i don't see a use that a tanto could bring, over say, a leaf shaped blade, so I tend to stay away from them.
check out the angle of the bob lum design tanto, it gives cutting edge with point control and a good piercing capability. it may change your mind
bdblue
Member
Posts: 1748
Joined: Tue Apr 24, 2012 10:04 pm
Location: Dallas, TX

#17

Post by bdblue »

I have a few different ones. I see that there is a lot of difference from one tanto to another, just like there is a lot of difference in one curved blade to another.

I think a tanto makes it easier to make the point stronger because that part of the blade could easily be ground to a different angle than the rest of the blade, with a curved blade it is more common to have the same back bevel all the way down.

I tend to like tanto's that have a relatively long point, in fact by coincidence my favorite is this fixed blade Spyderco.

Image
User avatar
defenestrate
Member
Posts: 2656
Joined: Fri Sep 24, 2004 10:33 am
Location: RTP NC area
Contact:

#18

Post by defenestrate »

I have a cheap, one-piece-cast black imported tanto which I have used occasionally - it probably has about a 4-5" blade. Also a Bear damascus bali-song which is a horrible flipper but the blade is actually kind of pretty. I considered putting the blade in a fixed handle of some kind but never got around to it.
-
Happy, Happy, Happy! Peel, Peel, Peel!
User avatar
mkd
Member
Posts: 95
Joined: Fri Jan 08, 2010 5:31 pm
Location: wisconsin

#19

Post by mkd »

i have a benchmade emrson cqc7 plain edge that i got 5 yrs ago.it is a heavy strong no gimmick knife and has a plain edge blade that is honed to razor sharpness.a very good folding heavy duty utility knife!
Sht
Member
Posts: 248
Joined: Sun Jan 01, 2012 8:28 pm
Location: New jersey

#20

Post by Sht »

It's nice to know you can stab stuff & not worry about breaking off your tip. Think of it as a mult grind you can have a super this hollow & a scraper/ pry bar all in one knife. I think my next life will either be a smf 3/4 tanto or a sebenza 21 tanto. I'm not going to sell all my drop points but it's nice to have different tools in the toolbox.

Image
Gayle Bradley
Bob lum tanto sprint
Milie camo
Para2 camo
Manix2 moonglow
Tasman salt
Tenacious (the whole lineup)
Kiwi SS

Knives at all times
Post Reply