Spyderco Amsterdam Meet 2024 Report
-
- Member
- Posts: 1400
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: Spyderco Amsterdam Meet 2024 Report
Missed this thread. I'll have to try for a 15V Millie 2, that's just too cool. The microjimbo is interesting too, we'll see how I feel when it hits the market.
Looking forward to what else there is to see!
Looking forward to what else there is to see!
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
- Manixguy@1994
- Member
- Posts: 12917
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: Spyderco Amsterdam Meet 2024 Report
Thank you Wouter ! The Millie 2 and Manix Lwt. are very appealing. Dan
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Re: Spyderco Amsterdam Meet 2024 Report
should we expect these to be stonewashed also? i might have to wait for this military 2 instead of the crucarta version.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Spyderco Amsterdam Meet 2024 Report
Well done Mr. Blonde!
The three upcoming 15V folders you posted about (Military2/G-10, Manix2/FRCP, MicroJimbo/G-10) will all be Regular Production or Sprint Runs?
The three upcoming 15V folders you posted about (Military2/G-10, Manix2/FRCP, MicroJimbo/G-10) will all be Regular Production or Sprint Runs?
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: Spyderco Amsterdam Meet 2024 Report
Thank you for the detailed photos.
It would indeed be great if the 15V Microjimbo is regular production. It'll give folks like me who live on the other side of the globe and have slow Internet connections a chance to use this steel.
It would indeed be great if the 15V Microjimbo is regular production. It'll give folks like me who live on the other side of the globe and have slow Internet connections a chance to use this steel.
Re: Spyderco Amsterdam Meet 2024 Report
Thanks, Nick. I was wondering something like that.
-Marc (pocketing a Cruwear Military2 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
- kennethsime
- Member
- Posts: 4790
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: Spyderco Amsterdam Meet 2024 Report
15V Millie 2 is pretty sweet, not going to lie. May be the closest I ever get to a K390 Millie 2.
Should still have time to buy the Crucarta first, though.
Should still have time to buy the Crucarta first, though.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
- Paul Ardbeg
- Member
- Posts: 491
- Joined: Sun May 14, 2023 11:39 am
- Location: The Netherlands
Re: Spyderco Amsterdam Meet 2024 Report
That Millie 2 in 15v Very cool to see the knives that have been showcased.
Last edited by Paul Ardbeg on Thu Mar 07, 2024 6:10 am, edited 1 time in total.
37 Spydies and counting
17 different steels and counting
MNOSD member #0052
***Memento mori, memento vivere***
17 different steels and counting
MNOSD member #0052
***Memento mori, memento vivere***
-
- Member
- Posts: 320
- Joined: Thu Feb 05, 2015 4:03 am
Re: Spyderco Amsterdam Meet 2024 Report
Ah, it's that time of the year again.. awesome, thanks for your work!
Re: Spyderco Amsterdam Meet 2024 Report
Or driving a rapier, a stick, or a slim jim into the mouth of the BBB bear... whatever it is, definitely cannot be unseen now!
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet
Re: Spyderco Amsterdam Meet 2024 Report
Thanks for the great report and photos!
That 15V Millie 2 is a must buy, exactly what I was waiting for (an interesting tool steel version without micarta). And possibly being regular production means I might actually be able to buy it :D
That 15V Millie 2 is a must buy, exactly what I was waiting for (an interesting tool steel version without micarta). And possibly being regular production means I might actually be able to buy it :D
- bearfacedkiller
- Member
- Posts: 11418
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Spyderco Amsterdam Meet 2024 Report
The Military2 in 15V is quite exciting!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- Doc Dan
- Member
- Posts: 14950
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Spyderco Amsterdam Meet 2024 Report
It certainly is! I like the color of the G10, too.
The Manix 2 LW in 15V looks really good, too.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Spyderco Amsterdam Meet 2024 Report
Standard production is good news, I really understood that it was all golden models in sprint-runs and that's it :)
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
- Mr Blonde
- Member
- Posts: 7661
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Para 3 Lightweight CPM-15V – Spyderco Design Production Sample 2024
I asked again during the IWA Show, and that is what I heard there. Still, when the next Reveal drops, we'll know for sure .Ramonade wrote: Standard production is good news, I really understood that it was all golden models in sprint-runs and that's it :)
- Mr Blonde
- Member
- Posts: 7661
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Para 3 Lightweight CPM-15V – Spyderco Design Production Sample 2024
The 15V trend continues with the Para 3 Lightweight! I love the Para 3 design, and I’m sure I’ll have extra room in my collection to add this one.
Approximate Specifications
Closed Length: 4.29 inch / 109 mm
Overall Length: 7.2 inch / 183 mm
Blade Length: 2.93 inch / 74 mm
Edge Length: 2.62 inch / 67 mm
Blade Thickness: 0.145 inch / 3,7 mm
Steel: CPM-15V
Weight: 2.4 oz / 68 g
Grind: Full-flat
Lock: Compression
Handle: FRN
Clip Position: Ambi
Tip Carry Position: Tip-Up
Origin: USA
I have no information on pricing or release dates.
Approximate Specifications
Closed Length: 4.29 inch / 109 mm
Overall Length: 7.2 inch / 183 mm
Blade Length: 2.93 inch / 74 mm
Edge Length: 2.62 inch / 67 mm
Blade Thickness: 0.145 inch / 3,7 mm
Steel: CPM-15V
Weight: 2.4 oz / 68 g
Grind: Full-flat
Lock: Compression
Handle: FRN
Clip Position: Ambi
Tip Carry Position: Tip-Up
Origin: USA
I have no information on pricing or release dates.
- Mr Blonde
- Member
- Posts: 7661
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Para 3 CPM-15V – Spyderco Design Production Sample 2024
If you don’t like the Para 3 lightweight in CPM-15V, and you prefer a little more heft and that peel-ply handle texture, then perhaps this version in G-10 is for you.
Approximate Specifications
Closed Length: 4.29 inch / 109 mm
Overall Length: 7.2 inch / 183 mm
Blade Length: 2.93 inch / 74 mm
Edge Length: 2.62 inch / 67 mm
Blade Thickness: 0.145 inch / 3,7 mm
Steel: CPM-15V
Weight: 3.4 oz / 96 g
Grind: Full-flat
Lock: Compression
Handle: FRN
Clip Position: Ambi
Tip Carry Position: Tip-Up
Origin: USA
I have no information on pricing or release dates.
Approximate Specifications
Closed Length: 4.29 inch / 109 mm
Overall Length: 7.2 inch / 183 mm
Blade Length: 2.93 inch / 74 mm
Edge Length: 2.62 inch / 67 mm
Blade Thickness: 0.145 inch / 3,7 mm
Steel: CPM-15V
Weight: 3.4 oz / 96 g
Grind: Full-flat
Lock: Compression
Handle: FRN
Clip Position: Ambi
Tip Carry Position: Tip-Up
Origin: USA
I have no information on pricing or release dates.
- Mr Blonde
- Member
- Posts: 7661
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Lil’ Native CPM-15V – Spyderco Design Production Sample 2024
The last of the CPM-15V Spyderco Production Samples I can share is the wonderful Lil’ Native. Personally, prefer the lockback version, but I realize market majority prefers the compression lock version. It’s all good, and I can still switch the clip on this lil’ big knife for left-handed carry .
Approximate Specifications
Closed Length: 3.47 inch / 88 mm
Overall Length: 5.89 inch / 150 mm
Blade Length: 2.42 inch / 61 mm
Edge Length: 2.02 inch / 51 mm
Blade Thickness: 0.125 inch / 3.2mm
Steel: CPM-15V
Weight: 2.5oz / 71g
Grind: Full-flat
Lock Type: Compression
Handle: G-10
Clip Position: Ambi
Tip Carry Position: Tip-up
Origin: USA
I have no information on pricing or release dates.
Approximate Specifications
Closed Length: 3.47 inch / 88 mm
Overall Length: 5.89 inch / 150 mm
Blade Length: 2.42 inch / 61 mm
Edge Length: 2.02 inch / 51 mm
Blade Thickness: 0.125 inch / 3.2mm
Steel: CPM-15V
Weight: 2.5oz / 71g
Grind: Full-flat
Lock Type: Compression
Handle: G-10
Clip Position: Ambi
Tip Carry Position: Tip-up
Origin: USA
I have no information on pricing or release dates.
- Mr Blonde
- Member
- Posts: 7661
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Re: Spyderco Amsterdam Meet 2024 Report
That is my understanding as well, the asterisk is used to indicate a different steel was used -instead of the final planned steel- for that particular sample,.