did somebody say magnacut manix...?!
- Buddafucco
- Member
- Posts: 3327
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: did somebody say magnacut manix...?!
Last edited by Buddafucco on Thu Dec 28, 2023 12:07 am, edited 1 time in total.
•• Beau
Re: did somebody say magnacut manix...?!
Thank you! Finally I was able to score one of these!Buddafucco wrote: ↑Wed Dec 27, 2023 9:38 pmFradon Safe&Lock... https://safeandlockstore.com/knives/spy ... plainedge/
Re: did somebody say magnacut manix...?!
When looking at this yellow Salt knife (Manix), I just catch myself thinking "there must be an SE version" - just so '"usual" with this particular configuration in I think any other model that comes like that (did not check though)
My ongoing question remains: Why no full SE Manix at all...(at least in ffg, I think there was a hollow ground SE once - ?) ??!
Why not at least in the Salt version, where SE has a long "tradition" ?
My ongoing question remains: Why no full SE Manix at all...(at least in ffg, I think there was a hollow ground SE once - ?) ??!
Why not at least in the Salt version, where SE has a long "tradition" ?
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: did somebody say magnacut manix...?!
I was wondering the same thing. I get one if so. I sort of just assumed it would be there, since the native got both. I assumed it was because the serrated manix got discontinued, but still surprised. My hope (prayer), is that maybe because we had so many skus added to the salt line (particularly magnacut) in the last reveal (manix pe, 2 different pm2 pe, para3 pe, native chief pe/se, stretch 2xl h2 pe/se), that maybe theyre just trying to spread them outWartstein wrote: ↑Thu Dec 28, 2023 12:05 amWhen looking at this yellow Salt knife (Manix), I just catch myself thinking "there must be an SE version" - just so '"usual" with this particular configuration in I think any other model that comes like that (did not check though)
My ongoing question remains: Why no full SE Manix at all...(at least in ffg, I think there was a hollow ground SE once - ?) ??!
Why not at least in the Salt version, where SE has a long "tradition" ?
and we see them in the next reveal, but who knows. Id buy one in a heartbeat.
- Buddafucco
- Member
- Posts: 3327
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: did somebody say magnacut manix...?!
Patriot Knifeworks... https://patriotknifeworks.com/spyderco- ... -c101pyl2/
Gear Supply Co... https://gearsupplyco.com/collections/kn ... s-c101pyl2
Edit: Out of stock
Gear Supply Co... https://gearsupplyco.com/collections/kn ... s-c101pyl2
Edit: Out of stock
Last edited by Buddafucco on Fri Dec 29, 2023 9:34 am, edited 2 times in total.
•• Beau
- Buddafucco
- Member
- Posts: 3327
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: did somebody say magnacut manix...?!
Last edited by Buddafucco on Thu Dec 28, 2023 3:40 pm, edited 1 time in total.
•• Beau
Re: did somebody say magnacut manix...?!
Last edited by Mrj on Thu Dec 28, 2023 1:11 pm, edited 1 time in total.
MRj “Weak things break!”
#0048
#0048
Re: did somebody say magnacut manix...?!
Thanks MRJ!Mrj wrote: ↑Thu Dec 28, 2023 12:13 pmNational knives $144 when signed in
https://www.nationalknives.com/spyderco ... llow-frcp/
You just saved me $20 on my order, I appreciate it!
Re: did somebody say magnacut manix...?!
Much appreciated and thanks Spyderco for the OpFocus!Buddafucco wrote: ↑Thu Dec 28, 2023 11:29 amSpyderco.com... https://www.spyderco.com/catalog/details/C101YL2/2486
Re: did somebody say magnacut manix...?!
dang. you beat me. they're sold out again.olditguy wrote: ↑Thu Dec 28, 2023 12:23 pmMuch appreciated and thanks Spyderco for the OpFocus!Buddafucco wrote: ↑Thu Dec 28, 2023 11:29 amSpyderco.com... https://www.spyderco.com/catalog/details/C101YL2/2486
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: did somebody say magnacut manix...?!
Windward wrote: ↑Thu Dec 28, 2023 6:15 amI was wondering the same thing. I get one if so. I sort of just assumed it would be there, since the native got both. I assumed it was because the serrated manix got discontinued, but still surprised. My hope (prayer), is that maybe because we had so many skus added to the salt line (particularly magnacut) in the last reveal (manix pe, 2 different pm2 pe, para3 pe, native chief pe/se, stretch 2xl h2 pe/se), that maybe theyre just trying to spread them outWartstein wrote: ↑Thu Dec 28, 2023 12:05 amWhen looking at this yellow Salt knife (Manix), I just catch myself thinking "there must be an SE version" - just so '"usual" with this particular configuration in I think any other model that comes like that (did not check though)
My ongoing question remains: Why no full SE Manix at all...(at least in ffg, I think there was a hollow ground SE once - ?) ??!
Why not at least in the Salt version, where SE has a long "tradition" ?
and we see them in the next reveal, but who knows. Id buy one in a heartbeat.
No, they just don´t do fully serrated Manixes (except back then a hollow ground one) and I really wonder why.
Actually started a thread about just this quite recently, see here viewtopic.php?t=95667#p1748541
Can´t see a reason for this:
- They do make serrated edges in Magnacut, BD1N, S30V... so that can´t be an issue.
- They bring out completely new models or new versions of existing models , where success and sales are unclear in the beginning, in PE AND SE (and sometimes CE) right from the start - Stretch XL (Salt and VG10'), Native Chief LW, Lil Native LW, Para 3 LW and so on - but never a Manix, certainly one of their bigger sellers.
- I figure putting serrations in an already existing blade, especially in not too hard steel like BD1N is not that much of an investment.
- And a serrated Manix, ESPECIALLY a Salt, would definitely sell, of that I am sure.
I really think teeth suit any Salt model well, and would also this Manix Salt.
To be clear: I am not complaining, just wondering...
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: did somebody say magnacut manix...?!
Well, it's here and it's awesome. I've been begging for this one for a long time and I'm glad to get my first screw construction LW. Will be a great summer carry, although S110v has stood the test of time: viewtopic.php?t=92418#p1623063
Who's got the best Rit Dye results here for yellow? I'm tempted by the Kelly Green fade, maybe to Red.
Who's got the best Rit Dye results here for yellow? I'm tempted by the Kelly Green fade, maybe to Red.
- Buddafucco
- Member
- Posts: 3327
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: did somebody say magnacut manix...?!
Last edited by Buddafucco on Fri Dec 29, 2023 6:57 pm, edited 1 time in total.
•• Beau
Re: did somebody say magnacut manix...?!
I dyed mine today. First time doing frcp other than black. Came out a little funny. Ibwas going for a light brown/coyote kind of color. The textured sides took the dye really nice, but around the permiter, by what would be the back spacer, it came out a little splotchy and made the injection marks from the mold even more obvious. If i did it again (and still may), if just leave it alone or go darker colors only.
- Buddafucco
- Member
- Posts: 3327
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
-
- Member
- Posts: 162
- Joined: Sun Jun 19, 2016 11:13 am
Re: did somebody say magnacut manix...?!
How easy is it just to swap scales? I was thinking of changing the white LW scales from my Rex 45 version over to the Salt.
Re: did somebody say magnacut manix...?!
nice! i'm not holding my breath, but a blacked out manix salt would be sweet.
keep your knife sharp and your focus sharper.
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C36MCW2, C258YL, C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
H2, CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: did somebody say magnacut manix...?!
Is this a black handle from an "old", pinned LW and you had to drill the pins out or did you already have a "new" screw construction LW in black?
And how/what exactly did you swap?
Just the scales?
Or also internal parts?
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: did somebody say magnacut manix...?!
I ordered from blade HQ, anyone got a shipping info yet.....?? this will be my first Manix and im really excited. My first spydie was a Native 5 salt, now i have shaman in 4v, lil native 20cv, Colorado USA made are only ones i buy