River's Edge PM2
- dj moonbat
- Member
- Posts: 1488
- Joined: Sat Mar 27, 2010 11:58 am
- Location: Sunny SoCal
Re: River's Edge PM2
I just don’t get why you’d take one of the most corrosion resistant steels out there and then put a tan coating on it. If it were a black knife, I might buy that it blends in at night. But desert tan? That’s just a way to lose your knife in a sandbox.
Re: River's Edge PM2
They're just going for the cool factordj moonbat wrote: ↑Thu Nov 12, 2020 1:36 pmI just don’t get why you’d take one of the most corrosion resistant steels out there and then put a tan coating on it. If it were a black knife, I might buy that it blends in at night. But desert tan? That’s just a way to lose your knife in a sandbox.
Of all the things I've lost I miss my mind the most!
- PayneTrain
- Member
- Posts: 1556
- Joined: Sun Mar 02, 2014 12:30 pm
- Location: CT
Re: River's Edge PM2
I'm naturally partial to earth tones so I think it's quite a handsome color combination, WAY better than black blades. I don't need to blend in at night any more than I need to find my knife in a sandbox, so all things being equal I'll take color over the absence thereof any day! More of this, please!
Edit: I should say that black does work when it's in contrast to a bright handle, like green or orange. But yeah, I'm definitely down for more blade colors!
Edit: I should say that black does work when it's in contrast to a bright handle, like green or orange. But yeah, I'm definitely down for more blade colors!
"Be the person your dog thinks you are."
- WilliamMunny
- Member
- Posts: 1184
- Joined: Fri Jan 29, 2021 1:20 pm
Re: River's Edge PM2
Back in stock:
https://riversedgecutlery.com/products/ ... idden=true
$179 - Limit 2
Got one, not sure if I want one, but if I did not buy right now I would not see it again. Figure I can always get my money back if I change my mind. PM2 is not my favorite, but maybe I can trade for a Shaman, we will see.
Good luck.
https://riversedgecutlery.com/products/ ... idden=true
$179 - Limit 2
Got one, not sure if I want one, but if I did not buy right now I would not see it again. Figure I can always get my money back if I change my mind. PM2 is not my favorite, but maybe I can trade for a Shaman, we will see.
Good luck.
Last edited by WilliamMunny on Wed Nov 08, 2023 9:30 am, edited 1 time in total.
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
- MidnightCoalCo.
- Member
- Posts: 39
- Joined: Sun Apr 11, 2021 6:15 pm
- Location: East Coast
Re: River's Edge PM2
Grabbed myself one too, almost have the full collection now!
Spyderco enthusiast with way too many to list.
Re: River's Edge PM2
I was one of the one's who ordered one last time but REC's system had a glitch and accidentally oversold. They cancelled my order and promised I would be one of first in line for the next run. I've been patiently waiting for a couple years for these to come back. So...about a week ago I received an email from REC saying they're finally getting a run of these and I was able to pre-order at the original price. I got my shipping notice a few minutes ago.
Of all the things I've lost I miss my mind the most!
Re: River's Edge PM2
That's awesome of them to keep their promise after how many years, although sucks you had to wait that long.Sharp Guy wrote: ↑Wed Nov 08, 2023 10:00 amI was one of the one's who ordered one last time but REC's system had a glitch and accidentally oversold. They cancelled my order and promised I would be one of first in line for the next run. I've been patiently waiting for a couple years for these to come back. So...about a week ago I received an email from REC saying they're finally getting a run of these and I was able to pre-order at the original price. I got my shipping notice a few minutes ago.
- WilliamMunny
- Member
- Posts: 1184
- Joined: Fri Jan 29, 2021 1:20 pm
Re: River's Edge PM2
That is pretty awesome, plus on the good side these have black liners. The original run did not.Sharp Guy wrote: ↑Wed Nov 08, 2023 10:00 amI was one of the one's who ordered one last time but REC's system had a glitch and accidentally oversold. They cancelled my order and promised I would be one of first in line for the next run. I've been patiently waiting for a couple years for these to come back. So...about a week ago I received an email from REC saying they're finally getting a run of these and I was able to pre-order at the original price. I got my shipping notice a few minutes ago.
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
Re: River's Edge PM2
Sharp Guy wrote: ↑Wed Nov 08, 2023 10:00 amI was one of the one's who ordered one last time but REC's system had a glitch and accidentally oversold. They cancelled my order and promised I would be one of first in line for the next run. I've been patiently waiting for a couple years for these to come back. So...about a week ago I received an email from REC saying they're finally getting a run of these and I was able to pre-order at the original price. I got my shipping notice a few minutes ago.
I was one of the glitches as well, and passed on the preorder this time around. While I appreciate the offer I gave up on acquiring these exclusives due to the difficulty in ordering and outrageous secondary market prices.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
Re: River's Edge PM2
Same here. I was really impressed with this. I also can’t believe 3 years have gone by that fast. Thanks REC!Sharp Guy wrote: ↑Wed Nov 08, 2023 10:00 amI was one of the one's who ordered one last time but REC's system had a glitch and accidentally oversold. They cancelled my order and promised I would be one of first in line for the next run. I've been patiently waiting for a couple years for these to come back. So...about a week ago I received an email from REC saying they're finally getting a run of these and I was able to pre-order at the original price. I got my shipping notice a few minutes ago.
Re: River's Edge PM2
I picked one up as well. I’m shocked they’re still in stock hours later. I’m sure the shadow drop had something to do with it. Still, I bet they must have ordered a large batch.
-
- Member
- Posts: 269
- Joined: Sat Jun 15, 2013 9:37 am
Re: River's Edge PM2
I managed to get a Paramilitary REC in september 2020
-
- Member
- Posts: 89
- Joined: Thu May 04, 2023 1:00 pm
Re: River's Edge PM2
Super stoked! Talk about shadow-drop, I had no idea this was coming. Thankful I had some restraint when the stormtrooper Manix 2 LW came out earlier this week. This is perhaps my favorite colorway of these types of exclusives, with a steel I have not really tasted. I landed a lil native avo earlier this year, but had to pass it on because lil native + XL glove size just doesn't really equal a user situation. The PM2 is *it*.
- Striple765Rider
- Member
- Posts: 181
- Joined: Thu May 25, 2023 12:54 pm
- Location: Danville, PA
Re: River's Edge PM2
I grabbed one!! This has been a very expensive week for me seeing as how yesterday grabbed one of the sweet GP knives storm trooper Manix’s.
Delica VG-10, Endura ZDP-189, Stretch 2 SS K390, Matriarch 2 VG-10, Para 3 LW BD1N, Para 2 CruCarta, Para 2 MaxaMet, Yojimbo 2 S30V, Manix 2 S30V, Knife Joy Manix 2 in 20CV, Teal Para 2 in S90V, Bade HQ Manix 2 Mint with M4, Blade HQ Shaman Micarta with M4, Mule in 15V, Delica in super blue/SUS410, Blade HQ Para 2 Natural Jade with satin M4, REC “Avocado” Para 2 204P, GPK White with DLC Rex 45, Knifejoy exclusive SpydieChef, Techno2, Caribbean sheepsfoot with dyed scales, cutlery shoppe orange/black DLC HXP wharncliffe Para 2, Endura VG10 SE wharncliffe project knife and a Bill Moran drop point in VG-10.
-Dave
-Dave
-
- Member
- Posts: 67
- Joined: Thu Jan 24, 2008 10:32 pm
Re: River's Edge PM2
nice; picksd one up as well.
Re: River's Edge PM2
This is crazy, I did not know these were about to be restocked. I didn't wake up today and know I was going to be buying another knife, let alone a PM2. I almost got the REX45 Manix yesterday but restrained myself. And I was tempted by a Sebenza this morning. But this avocado PM2 has been eluding me for years, and I just had to grab it while it was still around. Thanks for the heads up!