Wow - those are some substantial import fees!Ramonade wrote: ↑Sat Jun 24, 2023 7:00 amI checked after my post and yes they do. 36 USD to get it to France. It should make it a 200 USD knife once import fees are covered. Still totally worth it in my eyes.JoviAl wrote: ↑Sat Jun 24, 2023 5:51 amIIRC they ship globally - they certainly ship to SingaporeRamonade wrote: ↑Sat Jun 24, 2023 1:54 amI've been after a Goddard LW for a while. And I've been asking for a sprint run of this knife.
I have a rule to not buy exclusive since shipping and import fees make them so expensive but if St Nick's ships to France, and the price is right... I might just have to get this one...
St. Nick’s Exclusive red and black Goddard!
Re: St. Nick’s Exclusive red and black Goddard!
- Al
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Work: Jumpmaster 2
Home: DF2 K390 Wharncliffe/DF2 Salt H1 SE and K390 Police 4 LW SE/15V Shaman
Dream knives -
Chinook in Magnacut (any era)
Manix 2 XL Salt in Magnacut
A larger Rockjumper in Magnacut SE
Re: St. Nick’s Exclusive red and black Goddard!
Is this the first St Nick's Seki Spydie made with 4v?
I don't follow the SNK exclusives too closely, but thought the Delica used Hap40.
I don't follow the SNK exclusives too closely, but thought the Delica used Hap40.
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: St. Nick’s Exclusive red and black Goddard!
Nope. They’ve been running this combo for awhile now. Millie + Native + Manix families so far.
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: St. Nick’s Exclusive red and black Goddard!
Maybe read my post more closely? I was asking about Seki 4 v products specifically.kennethsime wrote: ↑Sat Jun 24, 2023 9:08 amNope. They’ve been running this combo for awhile now. Millie + Native + Manix families so far.
Last edited by Enactive on Sat Jun 24, 2023 9:33 am, edited 2 times in total.
-
- Member
- Posts: 1802
- Joined: Thu Jun 27, 2019 4:08 am
- Location: Norway
Re: St. Nick’s Exclusive red and black Goddard!
I don’t think this one is for me, but I sure like the trend.
@Ramonade, St. Nicks is a pleasure to buy from. The shipping fee is noticeable, but similar to any other I’ve dealt with. Fast and no fuss.
@Ramonade, St. Nicks is a pleasure to buy from. The shipping fee is noticeable, but similar to any other I’ve dealt with. Fast and no fuss.
Re: St. Nick’s Exclusive red and black Goddard!
Curious why not? I'm indecisive on this one, and could be pushed either direction by some wise council...
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: St. Nick’s Exclusive red and black Goddard!
Yeaaa, I don't really see it either. Pretty boring, kind of blocky design. Definitely looks the part of being a discontinued design. Interesting choice by St Nick's. Hopefully sells well for them, love most of those exclusives they put out there.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: St. Nick’s Exclusive red and black Goddard!
I really like the design considering it came out in 1990...but I'm not sure it's enough to make me pull the trigger. I appreciate SNK resurrecting designs of the past, and am curious about the molds, since it's FRN...
I'm sure it will sell out quickly, I just don't know if I need it in the collection...and my hesitation probably speaks louder than I'm giving it credit for.
*The price is right, but I don't know if 4V really fits this design...I'd rather have the CF/S90V Siren, but that's a considerable price increase...I believe this design appeals mostly to nostalgia, and very well at that.
I'm sure it will sell out quickly, I just don't know if I need it in the collection...and my hesitation probably speaks louder than I'm giving it credit for.
*The price is right, but I don't know if 4V really fits this design...I'd rather have the CF/S90V Siren, but that's a considerable price increase...I believe this design appeals mostly to nostalgia, and very well at that.
Last edited by Airlsee on Sat Jun 24, 2023 10:04 am, edited 1 time in total.
So it goes.
Re: St. Nick’s Exclusive red and black Goddard!
I picked up a Joker in this combo from them, so no not the first Seki in 4V. If you check the website they have a listing of all their exclusives they've had in the last few years.Enactive wrote: ↑Sat Jun 24, 2023 9:09 amMaybe read my post more closely? I was asking about Seki 4 v products specifically.kennethsime wrote: ↑Sat Jun 24, 2023 9:08 amNope. They’ve been running this combo for awhile now. Millie + Native + Manix families so far.
Re: St. Nick’s Exclusive red and black Goddard!
Thanks, Bemo. That's right, the Joker. Will look at their website.Bemo wrote: ↑Sat Jun 24, 2023 10:01 amI picked up a Joker in this combo from them, so no not the first Seki in 4V. If you check the website they have a listing of all their exclusives they've had in the last few years.Enactive wrote: ↑Sat Jun 24, 2023 9:09 amMaybe read my post more closely? I was asking about Seki 4 v products specifically.kennethsime wrote: ↑Sat Jun 24, 2023 9:08 amNope. They’ve been running this combo for awhile now. Millie + Native + Manix families so far.
Re: St. Nick’s Exclusive red and black Goddard!
I’m in. If it doesn’t sell out in 2mins like my previous experiences with snk.
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: St. Nick’s Exclusive red and black Goddard!
I’m in!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
- Hopsbreath
- Member
- Posts: 556
- Joined: Thu Jan 17, 2013 9:44 pm
- Location: Mt Dora, FL
Re: St. Nick’s Exclusive red and black Goddard!
Military hung around for a little while — it certainly wasn’t one of those situations where you needed your information loaded and saved so you could complete purchase the second it went live.
- Mini2white
- Member
- Posts: 433
- Joined: Sat Apr 23, 2016 7:26 pm
- Location: Australia
Re: St. Nick’s Exclusive red and black Goddard!
Love the knife but the 4V is not for me. With luck someone else will do a run in another blade steel.
Re: St. Nick’s Exclusive red and black Goddard!
Boring and blocky is part of the charm. It's like when you get a reissued vintage g shock
- Manixguy@1994
- Member
- Posts: 12647
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: St. Nick’s Exclusive red and black Goddard!
Old comparison shot I did on a Siren thread , to give you an idea of size of Goddard and Bloke pencil . MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
- kennethsime
- Member
- Posts: 4786
- Joined: Thu Dec 29, 2011 8:28 pm
- Location: California
Re: St. Nick’s Exclusive red and black Goddard!
...Enactive wrote: ↑Sat Jun 24, 2023 9:09 amMaybe read my post more closely? I was asking about Seki 4 v products specifically.kennethsime wrote: ↑Sat Jun 24, 2023 9:08 amNope. They’ve been running this combo for awhile now. Millie + Native + Manix families so far.
Great shot, Dan. Maybe I just need to try a Siren.Manixguy@1994 wrote: ↑Sat Jun 24, 2023 5:13 pmOld comparison shot I did on a Siren thread , to give you an idea of size of Goddard and Bloke pencil . MG2
I'm happiest with Micarta and Tool Steel.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Top four in rotation: K390 + GCM PM2, ZCarta Shaman, Crucarta PM2, K390 + GCM Straight Spine Stretch.
Re: St. Nick’s Exclusive red and black Goddard!
I think I'm gonna give this one a shot. I always liked the looks of it.
Same size closed as the Siren, but the rear of the handle is more efficient in terms of providing a grip area, so it'll be a close call. If I decide it's too small I'll just trade it for something else.
Same size closed as the Siren, but the rear of the handle is more efficient in terms of providing a grip area, so it'll be a close call. If I decide it's too small I'll just trade it for something else.
Re: St. Nick’s Exclusive red and black Goddard!
Thanks, I appreciate it. Like I wrote in my last post, the more efficient rear end of the handle means I should be good. The Siren does give me a full grip, but my pinky feels kind of like it wants to slip off the end of the grip area where the rear end curves to a point by the clip mount.Manixguy@1994 wrote: ↑Sat Jun 24, 2023 5:13 pmOld comparison shot I did on a Siren thread , to give you an idea of size of Goddard and Bloke pencil . MG2
Big fan of linerless volcano grip FRN too since that's what I carry most days.
Re: St. Nick’s Exclusive red and black Goddard!
Thanks for the comparison pic, MG2!
Why is 4V not for you? Because it isn't a stainless steel? I don't have any 4V and would love to know more about it.Mini2white wrote: ↑Sat Jun 24, 2023 1:20 pmLove the knife but the 4V is not for me. With luck someone else will do a run in another blade steel.
- Richard