REC said they were going to make a Scorpion Manix 2 in the future. Tan G-10, black DLC and 10V steel. I almost did not buy this one holding out for that one but there was just so much hype about this steel. Plus the amount of passion Shaun put into this is pretty great.salimoneus wrote: ↑Tue Dec 20, 2022 2:49 pm
I think the blade steel is pretty much the only selling point? There's a boatload of ball bearing lock Manix 2's already out there, even in this same exact bland color scheme. The stonewashing seems pretty mild and almost not noticeable. So the blade steel is the only practical difference.
Not saying it's not enough to garner interest, surely we can see it is enough, and I as well am curious to compare it to some of my current favorite steels. I can appreciate the work that has gone into it by all involved parties, and am interested in seeing the results first hand, since I already highly value other steels of similar composition.
But to me the difference from this steel to say the excellent 10V/K390 options we already have isn't worth it at secondary prices, especially since there doesn't even exist a 10V/K390 Manix 2 to be able to compare apples to apples. So hopefully I'll score one at the $158 or whatever, which I think is a good value price point. If not then I'll probably still manage to sleep at night just fine.
CPM 15v Manix 2
- WilliamMunny
- Member
- Posts: 1187
- Joined: Fri Jan 29, 2021 1:20 pm
Re: CPM 15v Manix 2
Endura AUS-8, Manix 2 S30V, Alcyone BD1N, PM2 Micarta Cruwear, Native 5 Maxamet (2nd), Para 3 Maxamet (2nd), Magnacut Mule, Z-Wear Mule, BBB 15V Manix 2, REC PM3 10V Satin, Dragonfly Salt 2, GB2 M4.
- salimoneus
- Member
- Posts: 361
- Joined: Sat Aug 13, 2011 8:52 pm
- Location: Colorado
Re: CPM 15v Manix 2
Good to know, that would be cool I'd like to see one, although I'm not really a huge DLC fan. Although I bet it won't be $158, and I'm sure it will be just as if not more difficult to find than this oneWilliamMunny wrote: ↑Tue Dec 20, 2022 4:09 pmREC said they were going to make a Scorpion Manix 2 in the future. Tan G-10, black DLC and 10V steel. I almost did not buy this one holding out for that one but there was just so much hype about this steel. Plus the amount of passion Shaun put into this is pretty great.
-
- Member
- Posts: 14
- Joined: Wed Aug 19, 2020 6:38 pm
Re: CPM 15v Manix 2
I was in RECs shop today. Asked if they had any Manix 2 sprints, and they said no, they sold their allotment in 30 seconds. He said they may be getting another shipment in, but wasn’t sure. One of the guys was nice enough to go back and check if they held any back, and sure enough he came out with one to sell me! Was surprised and very pumped to walk out with one!salimoneus wrote: ↑Tue Dec 20, 2022 4:31 pmGood to know, that would be cool I'd like to see one, although I'm not really a huge DLC fan. Although I bet it won't be $158, and I'm sure it will be just as if not more difficult to find than this oneWilliamMunny wrote: ↑Tue Dec 20, 2022 4:09 pmREC said they were going to make a Scorpion Manix 2 in the future. Tan G-10, black DLC and 10V steel. I almost did not buy this one holding out for that one but there was just so much hype about this steel. Plus the amount of passion Shaun put into this is pretty great.
-
- Member
- Posts: 156
- Joined: Mon Nov 22, 2021 10:59 pm
Re: CPM 15v Manix 2
I feel like this community should set up a GoFundMe to buy you a well earned thank you for all the hustling you've done letting us know where stuff's in stock.Buddafucco wrote: ↑Tue Dec 20, 2022 2:15 pmI tried changing the thread title. We'll see if that helps.
Re: CPM 15v Manix 2
Yes apparently so.
Well that explains why the drop page shows a 404 error now. That must be a record for this knife!steelbuckeye wrote: ↑Tue Dec 20, 2022 4:42 pmI was in RECs shop today. Asked if they had any Manix 2 sprints, and they said no, they sold their allotment in 30 seconds. He said they may be getting another shipment in, but wasn’t sure. One of the guys was nice enough to go back and check if they held any back, and sure enough he came out with one to sell me! Was surprised and very pumped to walk out with one!salimoneus wrote: ↑Tue Dec 20, 2022 4:31 pmGood to know, that would be cool I'd like to see one, although I'm not really a huge DLC fan. Although I bet it won't be $158, and I'm sure it will be just as if not more difficult to find than this oneWilliamMunny wrote: ↑Tue Dec 20, 2022 4:09 pmREC said they were going to make a Scorpion Manix 2 in the future. Tan G-10, black DLC and 10V steel. I almost did not buy this one holding out for that one but there was just so much hype about this steel. Plus the amount of passion Shaun put into this is pretty great.
Models: PM2, Endura 4, Chaparral, Para 3 LW, Rescue 3, Para 3, Shaman, Manix 2, Native 5
Steels: Elmax, S30V, XHP, 4V, VG-10, CPM CRU-WEAR, K390, Z-WEAR, S45VN, 204P, REX 45
s: MT22 RWL34, MT07 Damascus, MT33 REX 76
Re: CPM 15v Manix 2
With the 10V/15V series(k390,k294,PmA11) becoming such a popular high hardness steel, I wonder if they will be able to put in the extra emphasis on heat treat as they did this one. I don't like how often the price hikes seem to be hitting us. But I would throw down an extra $20 bill for custom or custom adjacent heat treat. Especially on the Manix. It's always cheaper than the PM2. I just hope that doesn't change. It was my first Spyderco and still is my favorite.
Re: CPM 15v Manix 2
Is there a picture of this? I'm always thinking of how to keep the clamping consistent
Re: CPM 15v Manix 2
I was thinking the same thing!! Was going very smoothly. I didn't want to jinx it.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: CPM 15v Manix 2
I do it 2 ways depending on blade shape and width.
This is my preferred and is most Repeatable.
PM2
Shaman
(I mark a line with a sharpie so I can see if it slips in the clamp)
I've also done it with the bug lined up with the side of the clamp.
The tape on the handles is so I dont get metal dust in there. I wrap a paper towel around the handle before the tape, so I dont get tape residue.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: CPM 15v Manix 2
My surrogate purchase (since I gave up on this Sprint) was a Lil' Native smooth G10/CruWear from KC.
I'd been thinking I wanted to try one, but the upgraded blade steel and lower price finally pushed me over the edge.
it might even arrive for Christmas!?!
...Dang that's a lot of tape!!!!!!!!
I'd been thinking I wanted to try one, but the upgraded blade steel and lower price finally pushed me over the edge.
it might even arrive for Christmas!?!
...Dang that's a lot of tape!!!!!!!!
-David
still more knives than sharpening stones...
still more knives than sharpening stones...
Re: CPM 15v Manix 2
I hope everyone has a Merry Christmas and uses their 15v for all those presents. I look forward to open more knives with mine. Then cut every box into pieces.
Last edited by Mrj on Wed Dec 21, 2022 5:48 am, edited 2 times in total.
MRj “Weak things break!”
#0048
#0048
Re: CPM 15v Manix 2
Double post
Last edited by Mrj on Wed Dec 21, 2022 5:47 am, edited 1 time in total.
MRj “Weak things break!”
#0048
#0048
Re: CPM 15v Manix 2
Deadboxhero wrote: ↑Sun Dec 18, 2022 4:10 pmTHANK you, its been an amazing day.
My beautiful son.
Trevor Houston
12/18/2022
I'll love him forever.
Congrats on your new baby! I missed it on the thread but I saw on YouTube. What a perfect December. New baby to go with the most sought after knife in the industry. Merry Christmas!!
MRj “Weak things break!”
#0048
#0048
- bearfacedkiller
- Member
- Posts: 11414
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: CPM 15v Manix 2
Out for delivery!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: CPM 15v Manix 2
My two separate packages were scheduled to be delivered Friday, but they're both out for delivery today.
My mailman doesn't typically show up until after 6 p.m.
My mailman doesn't typically show up until after 6 p.m.
Re: CPM 15v Manix 2
Glad you finally scored.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: CPM 15v Manix 2
I was getting a bit worried, but my order from GoingGear is on the way, and the OpticsPlanet order is still pending. I might end up with 2 of these!
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
Re: CPM 15v Manix 2
USPS has been slacking. My first order from KNIFEWORKS was lost in L.V. Nevada. Then was found the day after my order with National Knives. Now that order took the scenic route and went straight to New York from Michigan. I live in N.M. 1st world problems.
Re: CPM 15v Manix 2
USPS has been a real poop show for my last few orders..... My Lynch clips went from Washington, to Aurora, CO then down to Phoenix, then came back to Denver, CO and now are out for delivery. Don't even start me on my Grit-o-matic order a week ago....