KnifeJoy 20cv Endura4

[Gtscotty]

Steel Blue FRN, 20CV Uncoated, FFG, Under $120.00 ........... gimme!!!

Is this the same as the para 3 lw they did? Is this confirmed anywhere? Thanks.

That was "Stone Blue", and is definitely lighter than the knife in this picture, even taking the shot into the sun into account. "Steel Blue" is the dark navy color that the Knifejoy Damascus Seki folders are, and looks like a much better match.... That's my bet.

[Buddafucco]

20cv... Steel Blue... October 7, 10am Central... $114

[BAX229]

Might have to splurge on some CF scales

[Buddafucco]

Add to cart button is there?.. https://www.knifejoy.com/products/spyde ... 20cv-knife

Edit: Add To Cart button is no longer there

[Manixguy@1994]

Thank you much for the info . I sent for notification , still on fence though knowing that a DLT Endura should also be in the works in the future . Really like the color . MG2

[Nick D. Fingerz]

I may have to get one of these. One of my favorite knives and steels.

[GautamGoel]

MG2, is the DLT Endura confirmed?

[Tgmr05]

I really like the color on this one, hopeful to get one.

[Manixguy@1994]

Hi no confirmation but if you look at the line of succession: Dragonfly, Delica , and Endela. I think that DLT would definitely be dropping an Endura in the future. It makes sense that they would but silly me also could be wrong . I do really like the blue may have to get for a back up. Regards MG2

[The Mastiff]

I'm more a tool steel person but I think I'm going to have to grab one. I have yet to find an Endura I didn't like.

[Filoso-]

What a shame… looks like they don't ship out of the US. If any caritative soul could help me to get one I would be eternally grateful...

[lilshaver]

I am not a zome fan but this thing is not going to fit in with my dragonfly, delica, and endela 20CV zome models. ???????

[GautamGoel]

I was originally planning to pick one of these up - I edc the zdp1-89 model. But I'm not so sure about the color... the pic on the knifejoy website shows a blue which is a bit muted for my taste. Also, while 20cv is a premium steel, it isn't as exotic as, say, CPM cruwear, zdp-189, s110v, REX45, HAP40, etc. I feel like >50% of the recent sprints have been either 20cv or M390, and I'm a bit bored of it. Anyways, I'm still on the fence - I may wait for you guys to post pics of the knife on this thread before I decide whether to purchase one.

I've noticed that the scale color in real life often doesn't match the color in the photo. For example, I had the s30v endura, and the color of the scales looked *very* different from the pics. If you google the s30v endura, you will see a huge variation in color across pictures. I expect different cameras are using different color saturation settings; lighting can also make a big difference. The teal on the endura was a bit too green for my taste - I would have preferred it to be slightly more blue.

[steelcity16]

Can't wait!

[Tabo]

I was originally planning to pick one of these up - I edc the zdp1-89 model. But I'm not so sure about the color... the pic on the knifejoy website shows a blue which is a bit muted for my taste. Also, while 20cv is a premium steel, it isn't as exotic as, say, CPM cruwear, zdp-189, s110v, REX45, HAP40, etc. I feel like >50% of the recent sprints have been either 20cv or M390, and I'm a bit bored of it. Anyways, I'm still on the fence - I may wait for you guys to post pics of the knife on this thread before I decide whether to purchase one.

I've noticed that the scale color in real life often doesn't match the color in the photo. For example, I had the s30v endura, and the color of the scales looked *very* different from the pics. If you google the s30v endura, you will see a huge variation in color across pictures. I expect different cameras are using different color saturation settings; lighting can also make a big difference. The teal on the endura was a bit too green for my taste - I would have preferred it to be slightly more blue.

I’m 99.9% sure the handle color is the same as their damascus exclusives. So use those “in the wild” pictures as reference.

I plan on picking one up. It’s going to be a great camp food prep knife!

[RamZar]

Endura4 CPM-20CV Steel Blue FRN C10FPNB20CV KnifeJoy (Japan) will be in stock on Thursday, October 7, 2021 at 10:00am CT for $114.95.

[Hullk]

Great model
Great steel
Great FRN colour
Great stone washed clip
Great price

[Manixguy@1994]

I just got info that DLT does have a Endura in the works. Model will be a blade blade . MG2

[z1r]

I just got info that DLT does have a Endura in the works. Model will be a blade blade . MG2

A two for one deal! Sweet.

[steelcity16]

I just got info that DLT does have a Endura in the works. Model will be a blade blade . MG2

Assuming you mean black blade. I'm HOPING for a TiCN Cruwear/OD Green, but I am GUESSING it is TiCN 20CV with Red/Black Zome. I'm in regardless.