What Spyderco is in your pocket today??

[DSH007]

I like your office better than mine aicolainen! :)

If it's any comfort, there are very few days that are outdoor office friendly around here. And it only really works when I'm reading / researching, so most of the time my home office looks very similar to yours. Without the friendly Santa, though

Hahah! Guillaume the office gnome. He guards my desk and even looks after my knives sometimes.. :D

[DigDug72]

Pm2 wharnie chop today (roughly Para3 size w/ skinnied handles):

[ladybug93]

Pm2 wharnie chop today (roughly Para3 size w/ skinnied handles):

whenever i see you've posted, i always get excited to see what you've come up with. nice work, as always.

[Paraguy]

what do you like about 52100?

[TkoK83Spy]

what do you like about 52100?

I like that it's a pretty rare to find steel! It's very easy to sharpen, seems to love a toothy edge too. Edge retention isn't the greatest though.

[attila]

I have freshly sharpened M390 today:

Unfortunately, nearing the end of the sharpening, I chipped it close to the tip by dropping the aluminum strop base while removing it from the stone holder of my Hapstone V7. :mad:

What makes it even worse is that, I hadn’t carried this in months but about a week or two ago, I was practicing left handed operation of the lock and dropped it tip-first onto cement.

[Paraguy]

Pm2 wharnie chop today (roughly Para3 size w/ skinnied handles):

NICE WORK! Howd you do it?
Im carrying my K390 Endura as usual

[Paraguy]

what do you like about 52100?

I like that it's a pretty rare to find steel! It's very easy to sharpen, seems to love a toothy edge too. Edge retention isn't the greatest though.

Ive always wondered why they chose 52100 instead of some of the various other carbon steels. I suppose id have to try it to understand. I was my understanding that 1095 holds a better edge that 52100.

[PeaceInOurTime]

Just had the LBHB while on the trail. Got home and put the wharncliffe Endura in the pocket. :)

[bbturbodad]

[vivi]

Giving PE H1 another go. Wanted to compare it head to head to the PE LC200N version.

Still need to put a thinner edge on it. Planning to put the same edge on it I used on my Aqua Salt (200 grit, then stropping with 40 micron).

Touched it up at 20dps on the medium rods until it cleanly shaved.

[SG89]

My baby is 3 years old already... Time for a cleaning and some new shoes

[The Meat man]

My baby is 3 years old already... Time for a cleaning and some new shoes[img]https://i.ibb.co/3MdtLtj/20210625-215255.jpg[/img
[img]https://i.ibb.co/RHMNMMV/20210625-221034.jpg[/img

Thought at first you meant your son! :D He's probably about that age too, isn't he?

[SG89]

My baby is 3 years old already... Time for a cleaning and some new shoes[img]https://i.ibb.co/3MdtLtj/20210625-215255.jpg[/img
[img]https://i.ibb.co/RHMNMMV/20210625-221034.jpg[/img

Thought at first you meant your son! :D He's probably about that age too, isn't he?

He also has the same birth year and month as this knife :)

[MFlovejp]

Spent the week rafting a wild river in the Alaskan interior. My SE Pac Salt was my constant companion and it took everything that environment dished out to it with a smile. Here it is pictured next to a 5” wolf track maybe 2 days old.

[Wartstein]

Pm2 wharnie chop today (roughly Para3 size w/ skinnied handles):

Great chop, as always with your work! :)

And actually for me you just created the "better Para 3":
You did not stick to the lines and form that imho work for the PM2, but not so much for the Para 3: So your "Para 3" does not have that "hook" at the handle end that restricts grip area too much on a small knife, and it looks to have a nice, slim carry.... If you'd know could thin down the whole blade to 3 or even 2.5 mm : This would be a model I'd really consider to get! :)

[kobold]

I am pleased with my latest and smallest pocket chainsaw. :spyder:

[Paraguy]

Pm2 wharnie chop today (roughly Para3 size w/ skinnied handles):

Great chop, as always with your work! :)

And actually for me you just created the "better Para 3":
You did not stick to the lines and form that imho work for the PM2, but not so much for the Para 3: So your "Para 3" does not have that "hook" at the handle end that restricts grip area too much on a small knife, and it looks to have a nice, slim carry.... If you'd know could thin down the whole blade to 3 or even 2.5 mm : This would be a model I'd really consider to get! :)

Id like to do this with a factory second. Are there any inexpensive ways of getting them outside of buying from the outlet?

[PeaceInOurTime]

[Sumdumguy]

After the Kiwi 5 thread, I felt like tossing this one into my pocket for a while and giving my Micro Dyad a break.

How could anyone say no to bolsters and inlay?!



I would love to see a slightly larger Kiwi, glitzed up like it was intended to be. :D