Rivers Edge Cutlery Upcoming Exclusive
- spydie-fan
- Member
- Posts: 97
- Joined: Sat Jan 23, 2021 6:58 pm
- Location: Midwest
Re: Rivers Edge Cutlery Upcoming Exclusive
Same here. Complete joke of a drop. I knew they would go fast, but they must not of had many left after Bladeshow.
Re: Rivers Edge Cutlery Upcoming Exclusive
Sold out in seconds
Re: Rivers Edge Cutlery Upcoming Exclusive
I got the email and tried but no guacamole
Re: Rivers Edge Cutlery Upcoming Exclusive
My phone was in my hand when I got the email. Instantly followed the link. Sold out before I could complete check out. I never complain about this type of stuff, but this was complete bull.
Re: Rivers Edge Cutlery Upcoming Exclusive
I was reading David's thread on SE blades and my phone was next to me. I had already created an account at REC so checkout took less than 30 seconds.
They must have had 10 in stock
They must have had 10 in stock
Re: Rivers Edge Cutlery Upcoming Exclusive
I got one in my cart but couldn't checkout. This happened with the Lil Native as well, it kept popping up in stock so I'm going to stay optimistic with this one for the next 15 mins or so. I have a feeling I'm out of luck for now though, hopefully I'm quicker next drop. :)
-Nick
Re: Rivers Edge Cutlery Upcoming Exclusive
I can’t believe that was all of them already. I checked my email 2 minutes after it was sent out and it was already out of stock. I don’t understand how this system is better than having a set release time.
Para 3 Maxamet | Para 3 CruWear DLC | Smock M4 Jade G-10 | Shaman Z-Wear Micarta | Salt 2 LC200N Wharnie | Chaparral Birdseye Maple | Lil’ Native S90V CF | Dragonfly 2 20CV | Ladybug K390 | CRK Small Sebenza 31 S45VN PJ
Re: Rivers Edge Cutlery Upcoming Exclusive
Dang. Been checking off and on all day. Go figure.
Re: Rivers Edge Cutlery Upcoming Exclusive
Update...
.
This run is SOLD OUT
If you weren't able to grab one this time, there will be more chances as Spyderco delivers more to us. PLEASE UNDERSTAND WE ARE DOING WHAT WE CAN TO GET MORE REC EXCLUSIVES FROM SPYDERCO, IT IS A WAITING GAME. WE TAKE WHAT WE CAN GET WHEN WE CAN GET IT.
Just posted on eBay.... $600 buy-it-now
https://www.ebay.com/itm/265197718997?h ... J&LH_All=1
.
This run is SOLD OUT
If you weren't able to grab one this time, there will be more chances as Spyderco delivers more to us. PLEASE UNDERSTAND WE ARE DOING WHAT WE CAN TO GET MORE REC EXCLUSIVES FROM SPYDERCO, IT IS A WAITING GAME. WE TAKE WHAT WE CAN GET WHEN WE CAN GET IT.
Just posted on eBay.... $600 buy-it-now
https://www.ebay.com/itm/265197718997?h ... J&LH_All=1
Re: Rivers Edge Cutlery Upcoming Exclusive
Already 17 bids. This is why flippers will always be a problem.JMM wrote: ↑Tue Jun 15, 2021 7:21 pmUpdate...
.
This run is SOLD OUT
If you weren't able to grab one this time, there will be more chances as Spyderco delivers more to us. PLEASE UNDERSTAND WE ARE DOING WHAT WE CAN TO GET MORE REC EXCLUSIVES FROM SPYDERCO, IT IS A WAITING GAME. WE TAKE WHAT WE CAN GET WHEN WE CAN GET IT.
Just posted on eBay.... $600 buy-it-now
https://www.ebay.com/itm/265197718997?h ... J&LH_All=1
-
- Member
- Posts: 357
- Joined: Sat Apr 07, 2018 12:51 pm
Re: Rivers Edge Cutlery Upcoming Exclusive
I wish people would just be patient... But I get that drops can be nerve racking if it's something you REALLY want. At the same time... No Shaman is worth double the price. Maybe to a die hard collector, but for me anything 400ish and above has to be a midtech, or custom.T.J. wrote: ↑Tue Jun 15, 2021 8:00 pmAlready 17 bids. This is why flippers will always be a problem.JMM wrote: ↑Tue Jun 15, 2021 7:21 pmUpdate...
.
This run is SOLD OUT
If you weren't able to grab one this time, there will be more chances as Spyderco delivers more to us. PLEASE UNDERSTAND WE ARE DOING WHAT WE CAN TO GET MORE REC EXCLUSIVES FROM SPYDERCO, IT IS A WAITING GAME. WE TAKE WHAT WE CAN GET WHEN WE CAN GET IT.
Just posted on eBay.... $600 buy-it-now
https://www.ebay.com/itm/265197718997?h ... J&LH_All=1
Re: Rivers Edge Cutlery Upcoming Exclusive
I agree. Something else you “must have “ will always come along. Be patient, like you said. The way I see It, yeah I wanted this Shaman, but I also saved 224 bucks. I’ll put that towards my next “must have.”Spyderman91 wrote: ↑Tue Jun 15, 2021 8:04 pmI wish people would just be patient... But I get that drops can be nerve racking if it's something you REALLY want. At the same time... No Shaman is worth double the price. Maybe to a die hard collector, but for me anything 400ish and above has to be a midtech, or custom.T.J. wrote: ↑Tue Jun 15, 2021 8:00 pmAlready 17 bids. This is why flippers will always be a problem.JMM wrote: ↑Tue Jun 15, 2021 7:21 pmUpdate...
.
This run is SOLD OUT
If you weren't able to grab one this time, there will be more chances as Spyderco delivers more to us. PLEASE UNDERSTAND WE ARE DOING WHAT WE CAN TO GET MORE REC EXCLUSIVES FROM SPYDERCO, IT IS A WAITING GAME. WE TAKE WHAT WE CAN GET WHEN WE CAN GET IT.
Just posted on eBay.... $600 buy-it-now
https://www.ebay.com/itm/265197718997?h ... J&LH_All=1
Re: Rivers Edge Cutlery Upcoming Exclusive
The bigger problem is people are paying silly prices for these. Flippers go away when the market for resale decreases. I like the look of the REC blades, but there's no way in **** I am paying 2-3x over retail for one.T.J. wrote: ↑Tue Jun 15, 2021 8:00 pmAlready 17 bids. This is why flippers will always be a problem.JMM wrote: ↑Tue Jun 15, 2021 7:21 pmUpdate...
.
This run is SOLD OUT
If you weren't able to grab one this time, there will be more chances as Spyderco delivers more to us. PLEASE UNDERSTAND WE ARE DOING WHAT WE CAN TO GET MORE REC EXCLUSIVES FROM SPYDERCO, IT IS A WAITING GAME. WE TAKE WHAT WE CAN GET WHEN WE CAN GET IT.
Just posted on eBay.... $600 buy-it-now
https://www.ebay.com/itm/265197718997?h ... J&LH_All=1
Re: Rivers Edge Cutlery Upcoming Exclusive
Yeah. Not in the mood to tell my wife I dropped 230 plus tax the day she got her second COVID shot. So it prob worked out best this way.
- spydie-fan
- Member
- Posts: 97
- Joined: Sat Jan 23, 2021 6:58 pm
- Location: Midwest
Re: Rivers Edge Cutlery Upcoming Exclusive
Personally I think dropping this knife at Blade show was a bad idea. Not many people get to make it to the conference. To be fair to everyone the knife should of been released only on the website, to give as many people a chance to buy one as possible.
Like others have stated, I take it as I saved money to use for another knife :)
Like others have stated, I take it as I saved money to use for another knife :)
Last edited by spydie-fan on Tue Jun 15, 2021 8:32 pm, edited 1 time in total.
-
- Member
- Posts: 32
- Joined: Sat Mar 09, 2019 12:04 am
Re: Rivers Edge Cutlery Upcoming Exclusive
I didn't even get to see it in stock 1min into Thomas Moore posting it was live
-
- Member
- Posts: 103
- Joined: Wed Jun 09, 2021 3:29 pm
- Location: Hot as ****
Re: Rivers Edge Cutlery Upcoming Exclusive
I was on the site within a minute of the email and it was OOS already
The email thing is BS instead of a specific release time.
My Yahoo account got the email at (all my local time) 5:34
Wife got hers vis Gmail at 5:37
Brother via outlook.com 5:42
Buddy from work via yahoo 5:31
Just with that sample set alone, some people had an 11min head start on others for something that was expected to sell out in minutes anyway.
Honestly I might be done with REC
The email thing is BS instead of a specific release time.
My Yahoo account got the email at (all my local time) 5:34
Wife got hers vis Gmail at 5:37
Brother via outlook.com 5:42
Buddy from work via yahoo 5:31
Just with that sample set alone, some people had an 11min head start on others for something that was expected to sell out in minutes anyway.
Honestly I might be done with REC
----------------------------------------------------
Spyderco and Tops enthusiast
Obsessed with DLC Cruwear for some reason
Knives, Guns, and Watches, yes please
- Tom aka NotFixingIT
Spyderco and Tops enthusiast
Obsessed with DLC Cruwear for some reason
Knives, Guns, and Watches, yes please
- Tom aka NotFixingIT
Re: Rivers Edge Cutlery Upcoming Exclusive
I have to agree that 8:30 at night for a drop is pretty dumb. I was asleep lol. I had a gut feeling it wasn’t coming my way this time. I love rec but I prefer the way DLT and cutlery shoppe drop knives a lot better.
MRj “Weak things break!”
#0048
#0048
Re: Rivers Edge Cutlery Upcoming Exclusive
When I see how fast these exclusives sell out (however funky the color combinations are) - to me it just means that Spyderco is missing a solid material combination in the serial production. And given all the steels (and experience with them) at their disposal it is for me hard to understand that the only steel the normal Shaman can be had in is S30V and black G10 ...
I am perfectly fine with all the exclusives and sprints, nothing wrong with that (I actually find that super cool). But these are mostly aimed at collectors. User should be able to pick a knife in materials that suite the knife well without running after the limited releases. Look at standard Seki models - one can get the basic version in VG10 or go for the performance of K390 - that is a way to go with other utility/use oriented knives like Shaman, Chief, Manix, PM2, P3, etc. ... Yes I know we can't get it all at once and I do see that Spyderco is working to get there. So I hope to see most 'user' knives from Spyderco eventually in some sort of tool steel.
I am perfectly fine with all the exclusives and sprints, nothing wrong with that (I actually find that super cool). But these are mostly aimed at collectors. User should be able to pick a knife in materials that suite the knife well without running after the limited releases. Look at standard Seki models - one can get the basic version in VG10 or go for the performance of K390 - that is a way to go with other utility/use oriented knives like Shaman, Chief, Manix, PM2, P3, etc. ... Yes I know we can't get it all at once and I do see that Spyderco is working to get there. So I hope to see most 'user' knives from Spyderco eventually in some sort of tool steel.
... I like weird ...
Re: Rivers Edge Cutlery Upcoming Exclusive
I still hope for a regular production K390 Shaman. Or even S45VN.
8Cr13MoV:N690Co:VG10:S30V:S35VN:S45VN:Elmax:SPY27:H1:LC200N:4V:MagnaCut:CTS-XHP:204P:M390:20CV:Cru-Wear:Z-Wear:M4:Rex-45:10V:K390:15V:S90V:Z-Max:Maxamet