I Like Me Some XHP
I Like Me Some XHP
I only have the steel in my Chaparral LW but I really like it. This knife is one of two that regularly rotate in my pocket and this one has seen almost exclusive carry for a few months.
The steel sharpens fairly easily, responds well to simple stropping, has pretty good edge retention and, for my uses, sufficient corrosion resistance. To be honest, I like it better than S30V, if for no other reason than I find it easier to sharpen/maintain.
Anyway, I'd like to see more of it.
The steel sharpens fairly easily, responds well to simple stropping, has pretty good edge retention and, for my uses, sufficient corrosion resistance. To be honest, I like it better than S30V, if for no other reason than I find it easier to sharpen/maintain.
Anyway, I'd like to see more of it.
Last edited by Eli Chaps on Thu Aug 09, 2018 1:00 pm, edited 1 time in total.
Re: I Like Me Some XHP
I could have wrote that myself haha! My Chap LW is also my only knife in XHP and I absolutely love it. Carry it everyday in my small front/right pocket of my jeans, along with another larger knife of choice for that day. Looked up other knives that have the same steel after using mine daily for a few weeks and really enjoyed everything about it. A tough steel to come across, at least for models that I'd be interested in. I totally agree though, I'd love to see some more XHP.
- bearfacedkiller
- Member
- Posts: 11418
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: I Like Me Some XHP
I have the Chap and the ManixLW. I wish I had snagged the Military when they were still easy to come by. The Hundred Pacer will likely be my next dose of XHP. It’s a good stainless steel.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: I Like Me Some XHP
Agreed! My Chaparral and Bowie are my most used XHP, and its dead simple to keep scary sharp. I'm always glad to see it on a production knife.
- farnorthdan
- Member
- Posts: 4409
- Joined: Wed Apr 02, 2014 11:32 pm
Re: I Like Me Some XHP
Agreed, a fine steel for sure, I have numerous models with XHP, most recently been carrying my G10 M2 sprint from some years back and the Rhino, good stuff
Happy to be part of this great forum and group of down to earth spyderco addicts, Thanks Sal and gang.
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
Re: I Like Me Some XHP
I bought the FRN Chap after really enjoying my CF Chap for some time. I wanted a lightweight knife, I could wear clipped IWB in board shorts while swimming and fishing. Don't get me wrong, this is one of my favorite steels, but to say it is "stainless" is perhaps an overstatement. After less than an hour in a freshwater swimming pool the blade continually comes out significantly spotted and oxidized, specifically around the pivot. No big deal since it polishes right out with some Flitz in about 30 seconds, but I was a little surprised. I have lost two Dragonfly Salts while swimming so I have a bad taste in my mouth with that model (totally my fault) but still enjoy my Chaps, just not in the water. (ordered a salt 2 SE yesterday!)
Re: I Like Me Some XHP
Me too! It's a great all around EDC steel. I've got 2 Chaps and the Manix2 in this steel currently.
Re: I Like Me Some XHP
Despite what might be the obvious meaning of “stainless”, that’s not what stainless steel means. Most steels will eventually rust in water. It’s stupid terminology but it goes back too far to do anything about now.
If it’s not a Salt model it’s supposed to stay dry.
Re: I Like Me Some XHP
Right now the only piece I own with CTS-XHP is my C-36 Military (Brown handled) Sprint Run. I was actually able to get 2 of those ( one for EDC and one for the footlocker). I've kept it as a "back-up unit" just in case something were to happen to my M390 Military model which I consider "sacred" :cool: >> so I would at least have another Military model in case I lost that one or got it stolen ( like my G-10 Harpy :mad: ).Eli Chaps wrote: ↑Thu Aug 09, 2018 12:27 pmI only have the steel in my Chaparral LW but I really like it. This knife is one of two that regularly rotate in my pocket and this one has seen almost exclusive carry for a few months.
The steel sharpens fairly easily, responds well to simple stropping, has pretty good edge retention and, for my uses, sufficient corrosion resistance. To be honest, I like it better than S30V, if for no other reason than I find it easier to sharpen/maintain.
Anyway, I'd like to see more of it.
Now my biggest ambition about XHP blade steel is that I hear it performs very good in serrated edges. I believe it was Brother PEACENT who told me about COLD STEEL's SE hawkbills that do really well in that blade steel. I would very much love to see Spyderco maybe do a fixed blade, Spyderedged Hawkbill or some Spyderedged folder with XHP. Because it has some of the characteristics and properties similar to 440V which is one of my very favorite blade steels for Spyderedges.
I would also love to see Spyderco do a serrated outdoor type fixed blade with XHP as well. It's not bad at all in PE but from what I'm hearing it performs super in SE. It kind of reminds me of VG-10 which also has the distinction of performing well in PE & SE both. Most blade steels either favor one or the other.
Re: I Like Me Some XHP
Nice stuff, XHP. I like it thin (Chaparral), thick (Techno), and in between (Manix2).
-Marc (pocketing a Cruwear Military2 today)
“When science changes its opinion, it didn’t lie to you. It learned more.”
“When science changes its opinion, it didn’t lie to you. It learned more.”
- Doc Dan
- Member
- Posts: 14946
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: I Like Me Some XHP
CTS-XHP is probably my favorite "stainless" steel, being a sort of stainless D2. It has great properties. I wish I had gotten the M2 when it came out. I kept waffling because of the color and now I regret it.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
- knivesandbooks
- Member
- Posts: 1455
- Joined: Tue Aug 15, 2017 8:43 pm
- Location: Tulsa, OK
Re: I Like Me Some XHP
Like Doc, I regret skipping the XHP manix. I will buy just about any Golden sprint or exclusive in XHP nowadays. A Delica in XHP would be phenomenal. I didn't see the big deal at first but after using it a lot I really enjoy it. Right now I only have a chaparral, the rhino and a Slsyz bowie in it but I do want more. It is in my top five favorite user steels: 5.Hap40, 4.S30v, 3.LC200n, 2.XHP, 1.Cru-Wear. (M4 is my favorite but sharpening it is rough on me). I'd take just about any knife in it, from kitchen to fixed blade to pocket knife. Also, I've never had a chip on a XHP blade from any company.
Christ is risen from the dead, trampling down death by death, and on those in the tombs bestowing life!
Re: I Like Me Some XHP
been using xhp in the kitchen (meglio) and it definitely rocks! the edge stays long and is quite tough.. much tougher in fact than my vg10 santoku (mcusta) being run in the same hardness. i figure cruwear will definitely excel over it a bit more
Re: I Like Me Some XHP
I didn't know that stainless was dated terminology. Thanks for the heads up. That is why I love this place. I learn something new every time I log in.zhyla wrote: ↑Thu Aug 09, 2018 5:15 pmDespite what might be the obvious meaning of “stainless”, that’s not what stainless steel means. Most steels will eventually rust in water. It’s stupid terminology but it goes back too far to do anything about now.
If it’s not a Salt model it’s supposed to stay dry.
Re: I Like Me Some XHP
That Meglio is gorgeous!
- Doc Dan
- Member
- Posts: 14946
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: I Like Me Some XHP
I am certain not everyone would agree to that statement. It is okay as far as it goes, as long as people understand that it is stain less and not rust proof.mrtodd777 wrote: ↑Fri Aug 10, 2018 7:14 amI didn't know that stainless was dated terminology. Thanks for the heads up. That is why I love this place. I learn something new every time I log in.zhyla wrote: ↑Thu Aug 09, 2018 5:15 pmDespite what might be the obvious meaning of “stainless”, that’s not what stainless steel means. Most steels will eventually rust in water. It’s stupid terminology but it goes back too far to do anything about now.
If it’s not a Salt model it’s supposed to stay dry.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
- dj moonbat
- Member
- Posts: 1488
- Joined: Sat Mar 27, 2010 11:58 am
- Location: Sunny SoCal
Re: I Like Me Some XHP
C'mon Spyderco! Make it your default high-end steel! Right now, you're selling S30V, up against everybody and his brother who are marketing knives with S35VN, which has a whole extra 5 Ns. Dare to be different!
-
- Member
- Posts: 1559
- Joined: Sun Oct 11, 2015 5:36 pm
Re: I Like Me Some XHP
I think it would resist staining much better if it were polished instead of satin
S30V, VG10, M4, XHP, BD1, Cruwear, Elmax, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390, 20CV, BD1N, S45VN waiting to afford MagnaCut
- bearfacedkiller
- Member
- Posts: 11418
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: I Like Me Some XHP
Stainless and rustproof are different. A stainless steel does in fact stain less than a carbon steel. The name makes sense to me. If the name was stainproof then it would be a misnomer. Also, a pool is chlorinated. While it is not sea water it is corrosive. Chlorine (or more specifically calcium hypochlorite) is an extremely reactive compound. That is what makes it an effective disinfectant.Doc Dan wrote: ↑Fri Aug 10, 2018 8:21 amI am certain not everyone would agree to that statement. It is okay as far as it goes, as long as people understand that it is stain less and not rust proof.mrtodd777 wrote: ↑Fri Aug 10, 2018 7:14 amI didn't know that stainless was dated terminology. Thanks for the heads up. That is why I love this place. I learn something new every time I log in.zhyla wrote: ↑Thu Aug 09, 2018 5:15 pmDespite what might be the obvious meaning of “stainless”, that’s not what stainless steel means. Most steels will eventually rust in water. It’s stupid terminology but it goes back too far to do anything about now.
If it’s not a Salt model it’s supposed to stay dry.
If it isn's a salt it shouldn't get wet? I get stainless steels wet all the time. Shoot, I even get carbon steels wet all the time. Fresh water is not the same as sweat, pool water or sea water.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: I Like Me Some XHP
That definitely helps, even in plain carbon steel.koenigsegg wrote: ↑Fri Aug 10, 2018 9:31 amI think it would resist staining much better if it were polished instead of satin