V-TOKU2 Delica has been released

Discuss Spyderco's products and history.
infinkc
Member
Posts: 156
Joined: Fri Jan 06, 2017 11:57 am

Re: V-TOKU2 Delica has been released

#61

Post by infinkc »

Is it a stainless or black clip? I am seeing both in pictures
blueblur
Member
Posts: 499
Joined: Wed May 10, 2017 3:09 pm
Location: The Keystone State

Re: V-TOKU2 Delica has been released

#62

Post by blueblur »

The clip is stainless. The photos of the black clip were from the initial announcement.
User avatar
Sharp Guy
Member
Posts: 8561
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: V-TOKU2 Delica has been released

#63

Post by Sharp Guy »

I just noticed that St. Nick's Knives has 1 of these available.
Of all the things I've lost I miss my mind the most!
User avatar
anagarika
Member
Posts: 1687
Joined: Sun Jul 15, 2012 5:59 pm

Re: V-TOKU2 Delica has been released

#64

Post by anagarika »

harronek wrote:
Fri Aug 03, 2018 12:09 am
I wasn't going to , buuuuttttttttt.....
I just purchased one .

Ken
Glad you did ...!!!
Having got the Endura, how can you resist a Delica? ;)
Will it also get the blue screws?
(Thanks for explaining the screws, anyone sells also the bolt? Will only get if all can be converted... :) )
Chris :spyder:
User avatar
Sharp Guy
Member
Posts: 8561
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: V-TOKU2 Delica has been released

#65

Post by Sharp Guy »

I received my Delica earlier than expected. So far so good!

Image
Of all the things I've lost I miss my mind the most!
User avatar
PayneTrain
Member
Posts: 1556
Joined: Sun Mar 02, 2014 12:30 pm
Location: CT

Re: V-TOKU2 Delica has been released

#66

Post by PayneTrain »

Just opened my package from GPK (with another Delica, as luck would have it). The color is verrrrry cool! Stainless clip and SUS410, if there's still confusion about that. Can't wait to try the steel!
"Be the person your dog thinks you are."
User avatar
Slumblor
Member
Posts: 618
Joined: Sun Oct 04, 2015 9:41 pm
Location: Ontario, Canada

Re: V-TOKU2 Delica has been released

#67

Post by Slumblor »

I guess I forgot to cancel my knifecenter pre-order because I just got my shipping notice
User avatar
bearfacedkiller
Member
Posts: 11411
Joined: Sat Jan 04, 2014 1:22 pm
Location: hiding in the woods...

Re: V-TOKU2 Delica has been released

#68

Post by bearfacedkiller »

Image
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
rivy
Member
Posts: 400
Joined: Sun May 07, 2017 4:58 pm

Re: V-TOKU2 Delica has been released

#69

Post by rivy »

Really wanting to get one of these but I keep missing them. Jumping into this thread to hopefully see the next time someone notices them in stock somewhere. Thanks in advance! haha.
User avatar
knivesandbooks
Member
Posts: 1455
Joined: Tue Aug 15, 2017 8:43 pm
Location: Tulsa, OK

Re: V-TOKU2 Delica has been released

#70

Post by knivesandbooks »

Mine's coming in tomorrow from knifeworks! Gpk still had a few.
Christ is risen from the dead, trampling down death by death, and on those in the tombs bestowing life!
Joey
Member
Posts: 540
Joined: Tue Aug 07, 2018 3:35 pm

Re: V-TOKU2 Delica has been released

#71

Post by Joey »

Rivers edge cutlery has had them in stock. Free shipping! Just got mine in today.
User avatar
Holland
Member
Posts: 7567
Joined: Fri Jan 06, 2012 10:37 pm
Location: Alberta

Re: V-TOKU2 Delica has been released

#72

Post by Holland »

bearfacedkiller wrote:
Wed Aug 08, 2018 2:24 pm
Image
Thanks for the pic Darby, I was curious how close the color was to the superblue run
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
User avatar
Sharp Guy
Member
Posts: 8561
Joined: Tue Jan 26, 2016 2:19 pm
Location: DFW, TX (orig. from N. IL)

Re: V-TOKU2 Delica has been released

#73

Post by Sharp Guy »

It looks like National Knives and Rivers Edge Cutlery also has them in stock.
Of all the things I've lost I miss my mind the most!
User avatar
Woodpuppy
Member
Posts: 3700
Joined: Wed Jun 27, 2018 6:38 pm
Location: Florida

Re: V-TOKU2 Delica has been released

#74

Post by Woodpuppy »

Could have got one last night off epay with the 15% coupon. Thought hard about it, but want a DF.
User avatar
Slumblor
Member
Posts: 618
Joined: Sun Oct 04, 2015 9:41 pm
Location: Ontario, Canada

Re: V-TOKU2 Delica has been released

#75

Post by Slumblor »

I was convinced that CBSA had decided to keep mine, but it showed up in my mailbox today! Guess it was just the tracking, but it was a nice surprise. Really liking the color, interested to try this steel.
ptd
Member
Posts: 26
Joined: Thu May 31, 2018 10:42 pm
Location: Texas

Re: V-TOKU2 Delica has been released

#76

Post by ptd »

Knifeworks appears to have them in stock again.

-pd
User avatar
Spyder-fan
Member
Posts: 154
Joined: Mon Dec 31, 2012 7:08 pm
Location: Midwest

Re: V-TOKU2 Delica has been released

#77

Post by Spyder-fan »

Does someone own this and the Kahr Delica in denim? Curious how the colors compare.
Kiteman72
Member
Posts: 53
Joined: Tue Jul 17, 2018 8:11 pm
Location: Nebraska

Re: V-TOKU2 Delica has been released

#78

Post by Kiteman72 »

Spyder-fan wrote:
Tue Aug 14, 2018 6:30 pm
Does someone own this and the Kahr Delica in denim? Curious how the colors compare.
I wish I could post a pic for you but you'll have to settle for my terrible description. :)

The Kahr is basically a bit darker, and the V-toku2 is more gray. They are different enough that, from a knife nut's perspective, having both makes total sense.
User avatar
shunsui
Member
Posts: 1639
Joined: Fri Apr 12, 2013 10:22 pm

Re: V-TOKU2 Delica has been released

#79

Post by shunsui »

Rivers Edge also has the Endura.
Tom S
Member
Posts: 28
Joined: Fri Sep 24, 2004 10:33 am
Location: USA

Re: V-TOKU2 Delica has been released

#80

Post by Tom S »

These seem to be a pretty large run! I ended up with two so the first one is going to go through weekend cardboard reduction duty to test out the steel before it goes on a set of custom ghost green G10 scales.
Post Reply