If you could pick one discontinued knife to turn into a sprint..

[6leafdom]

i have one in full serration =P love it!

[steelcity16]

So many...I would REALLY like to see a couple of runs of Japan-made knives in G10 with Hap40, Superblue, VTOKU, and then whatever the hot steel of the year is each year after that. So what they are doing with the Seki FRN family of knives, but in G10. G10 Delica, Endura, Stretch, Dragonfly, Jester, Rookie, Worker, Caly 3, Caly 3.5, and Caly Jr. One run a year in the same steel with matching G10 colors. I'd buy a couple sets each year! Can we please start with laminated Superblue and Blurple G10????

[steelcity16]

So many...I would REALLY like to see a couple of runs of Japan-made knives in G10 with Hap40, Superblue, VTOKU, and then whatever the hot steel of the year is each year after that. So what they are doing with the Seki FRN family of knives, but in G10. G10 Delica, Endura, Stretch, Dragonfly, Jester, Rookie, Worker, Caly 3, Caly 3.5, and Caly Jr. One run a year in the same steel with matching G10 colors. I'd buy a couple sets each year! Can we please start with laminated Superblue and Blurple G10????

I also would LOVE to see a run of these models as full Salts with transluscent yellow G10, and full serrated H1 blades! :eek:

[razorsharp]

This is a hard one, but I think I pick the Phoenix.

[PSquared]

Double Bevel without the tanto .... actually without the double bevel either - Starmate shaped blade in a Double Bevel chassis ... or a FFG mini Starmate with 3mm blade stock and a 3.2 inch blade

[T_MAC686]

Double Bevel without the tanto .... actually without the double bevel either - Starmate shaped blade in a Double Bevel chassis ...

You mean like this?

//forum.spyderco.com/viewto ... =2&t=65251

[FullCircleHook]

If I only get one pick, I'd take an LC200N Catcherman. I'd love to see it updated to a wire clip while I’m dreaming.

[PSquared]

Double Bevel without the tanto .... actually without the double bevel either - Starmate shaped blade in a Double Bevel chassis ...

You mean like this?

//forum.spyderco.com/viewto ... =2&t=65251

Exactly that. That very thread got me to round the cutting edge on my Double Bevel. I don’t have the skill, tools or patience to regrind the whole thing flat but getting rid of the tanto makes a big difference to me already. It also made me re-evaluate my desire for a Lum Tanto .... and I’m thinking of rounding off the tanto on my LFTi .... more of a challenge due to the coating.

[joeldworkin307]

Double Bevel without the tanto .... actually without the double bevel either - Starmate shaped blade in a Double Bevel chassis ...

You mean like this?

//forum.spyderco.com/viewto ... =2&t=65251

Exactly that. That very thread got me to round the cutting edge on my Double Bevel. I don’t have the skill, tools or patience to regrind the whole thing flat but getting rid of the tanto makes a big difference to me already. It also made me re-evaluate my desire for a Lum Tanto .... and I’m thinking of rounding off the tanto on my LFTi .... more of a challenge due to the coating.

I have one, but maintain the double bevel...

[BravoTango]

#1 for sure, 92mm Citadel.
#2, Superhawk

[steelcity16]

Ocelot with Hap40 and Jade G10 a la BHQ exclusive. Too bad the rights to produce this one are gone.

[BrianMcCord]

Chokwe with the BHQ treatment. I think the new Lum coming out is the bees knees.

[Johnnie1801]

Gayle Bradley 1 with g10 scales and k390

[ji_long]

A nilakka in cpm154 or 3v with ironwood or pakkawood scales.

[jlw]

An Air with Raffir Noble scales.

[5-by-5]

Zome lc200n Spyderhawk

[steelcity16]

Caly Jr in dark green G10 with Hap40 and full skeletonized liners.

[steelcity16]

Original backlock manix in BHQ exclusive form

[steelcity16]

Mini Manix in BHQ exclusive form

[nurunuru]

Probably the Dodo. I know it already got a couple of sprints, but there's no need for it stay extinct, right?!