I wish Spyderco would make...
I wish Spyderco would make...
There have been a lot of interesting threads lately about upsizing, downsizing existing models, etc, but the release of the Lum Darn Dao got me thinking, that is a very cool blade, but not one I would use enough to justify the purchase (glad they made it, though, for those who want one). I found myself thinking, I wish they would do a run of the Lum Tanto fixed blade in an "upgrade" steel - Spyderco has done several great fixed blades in S90V, one of my favorite steels for edge holding.
--> So I wish Spyderco would make a Lum Tanto fixed blade in S90V!
--> To add to my continued top priority ask - a Lum Tanto folder in a 3V, 4V, Cruwear, PD1, S90V, or something up from VG10 at least. There has been a long thread on that, of course, //forum.spyderco.com/viewto ... =2&t=74121
What do you wish Spyderco would make (what is highest on your list?) ?
--> So I wish Spyderco would make a Lum Tanto fixed blade in S90V!
--> To add to my continued top priority ask - a Lum Tanto folder in a 3V, 4V, Cruwear, PD1, S90V, or something up from VG10 at least. There has been a long thread on that, of course, //forum.spyderco.com/viewto ... =2&t=74121
What do you wish Spyderco would make (what is highest on your list?) ?
Re: I wish Spyderco would make...
Sliverax without bearings with M4/Cruwear/Maxamet with rounded and contoured polished black G10 scales.
All SE all the time since 2017
~David
~David
Re: I wish Spyderco would make...
This was mentioned on a different thread, but a fixed blade Military with contoured handles and kydex sheath. One can dream...
Peter
Re: I wish Spyderco would make...
Pacific Salt 2 FFG LC200n
Manix 2 XL back lock in 204p or M4
Manix 2 XL back lock in 204p or M4
:spyder: CO1 Worker 2014 Sprint(x2)-Southard-Myrtle-PM2 S110v-Sage 5-Sliverax-Lum Tanto FB Sprint-Dragonfly 2 ZDP-189-Delica 4 G-10-Manix 2 FW-Endura 4-Tasman-Roadie-Delica 2 Stainless-Tenacious Turtle-Bug :spyder:
Dreaming for a Pacific Salt 2 FFG LC200n and a
Manix 2 XL back lock
Dreaming for a Pacific Salt 2 FFG LC200n and a
Manix 2 XL back lock
Re: I wish Spyderco would make...
Yes sir, that is very high on my list too!anycal wrote:This was mentioned on a different thread, but a fixed blade Military with contoured handles and kydex sheath. One can dream...
- SC_PATRIOT
- Member
- Posts: 307
- Joined: Mon Feb 25, 2013 7:43 am
- Location: piedmont of SC
Re: I wish Spyderco would make...
A Manix 2 XL in either Cruwear, S110v, or 10v.
I bet the Cruwear would be gone before pre-orders were approved. Just saying...
I bet the Cruwear would be gone before pre-orders were approved. Just saying...
-
- Member
- Posts: 2847
- Joined: Sat Jun 11, 2016 12:45 am
- Location: Barcelona, Spain
Re: I wish Spyderco would make...
FFG LC200 is still to come, and I'm anxious for it
Re: I wish Spyderco would make...
Actually I wish they would re-make the C-60 Ayoob model again>> and in SE & PE both. It's just too good of a folder to forget about. I also wish that Massad Ayoob and Sal Glesser would get together again for another one of his designs.
Re: I wish Spyderco would make...
An original C52 Calypso Jr. in the carbon fiber used for the CF Dodo (no liners) instead of Micarta, Super Blue, and a matte (titanium?) clip.
oooooooooooor...
A C22 Walker (Blue Almite/CF style, tip-up clip) with titanium scales like the Lum Chinese Folder run and Super Blue.
Neither of those has a shot in the universe of ever being made, but either would make me very happy as an EDC.
oooooooooooor...
A C22 Walker (Blue Almite/CF style, tip-up clip) with titanium scales like the Lum Chinese Folder run and Super Blue.
Neither of those has a shot in the universe of ever being made, but either would make me very happy as an EDC.
-
- Member
- Posts: 92
- Joined: Mon Nov 20, 2017 12:53 pm
Re: I wish Spyderco would make...
I would also like to see some more Manix 2 XL options, Jade/M4, CF/s110v. How about an XL lightweight? Translucent blue FRCP & at least s30v steel, I would like screw together construction instead of the pins used on the Manix 2 LW, but it wouldn't stop me from buying one if it was pinned. Call me crazy for putting XL and LW in the same sentance, but I think it'd work!
:spyder: Ben,
The North Remembers.
Has (Always in flux): Shaman, Chef, Techno, M390 Para 3, Gayle Bradley 2, Manix 2 M4. Manix 2 XL, Blue Weave Domino, CF Chaparral, Vtoku2 Endura 4, D-Fly Salt Hawk SE.[/s].
Wants: Manix 2 XL CPM-M4 or 4V, Compression Lock, Tip-up Military, Yojimbo 2 XL.
The North Remembers.
Has (Always in flux): Shaman, Chef, Techno, M390 Para 3, Gayle Bradley 2, Manix 2 M4. Manix 2 XL, Blue Weave Domino, CF Chaparral, Vtoku2 Endura 4, D-Fly Salt Hawk SE.[/s].
Wants: Manix 2 XL CPM-M4 or 4V, Compression Lock, Tip-up Military, Yojimbo 2 XL.
Re: I wish Spyderco would make...
I like the idea of the custom knife making service from Benchmade. You can choose between a Mini Grip, Grip, Barrage, or Mini Barrage. The Barrage variants are assisted. You can choose edge type, blade steel (quite a few options as well), handle material/color, and even some graphics/colors for the blade. How cool would it be to make a Stomtrooper PM2 (white handle, black blade and hardware)?
Re: I wish Spyderco would make...
Slysz Rat. XHP is fine with me :)
Its funny, when I look back at the smaller/bigger threads, it was Manix2 based for me. I'm still hoping for an XL lightweight, and also for a smaller version of the Manix2... or perhaps a Sage CBBL FRCP is a more realistic request?
I find the linerless G10 Manix2 and Native5 encouraging. I'm really hoping they make a linerless contoured CF version of the Manix2 like they did the Native5.
Its funny, when I look back at the smaller/bigger threads, it was Manix2 based for me. I'm still hoping for an XL lightweight, and also for a smaller version of the Manix2... or perhaps a Sage CBBL FRCP is a more realistic request?
I find the linerless G10 Manix2 and Native5 encouraging. I'm really hoping they make a linerless contoured CF version of the Manix2 like they did the Native5.
- Larry_Mott
- Member
- Posts: 2590
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: I wish Spyderco would make...
A satin finish blade Shaman
A Kopa with bolsters/inlays
More Lums! :)
More Micarta, wood and natural material scales
A Kopa with bolsters/inlays
More Lums! :)
More Micarta, wood and natural material scales
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
Re: I wish Spyderco would make...
^^This^^ I would love to see a Ti Lum Chinese with a steel upgrade.Larry_Mott wrote: More Lums! :)
Do right always. It will give you satisfaction in life.
--Wovoka
--Wovoka
- Larry_Mott
- Member
- Posts: 2590
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: I wish Spyderco would make...
I have a sneaking suspicion there are more Lums gathering dust in Golden Co.. :) Hitherto unseen utside HQ
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
Re: I wish Spyderco would make...
XL Dfly3
Marius
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
" A mind all logic is like a knife all blade. It makes the hand bleed that uses it "
( Rabindranath Tagore )
Proud member of the old school spyderedge nation
Re: I wish Spyderco would make...
I wish Spyderco would make a regular production ALL BLACK Ladybug Hawkbill ! Black blade and blade handle!
-
Also wish to see more collaborations with Darriel Caston and Serge Panchenko!
-
Also wish to see more collaborations with Darriel Caston and Serge Panchenko!
- Nick
Re: I wish Spyderco would make...
I wish they would make the Slysz Swayback
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: I wish Spyderco would make...
More linerless Delica models (using the Salt 2 handles in various colors)...with other steels (S110V, S90V, LC200N, etc...)...and various blade shapes.
-
- Member
- Posts: 12664
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: I wish Spyderco would make...
More Lum fixed blades but, with CTS-204P.