St. Nick's Knives Exclusive Para 3
Re: St. Nick's Knives Exclusive Para 3
Another color comparison shot. I think the Delicas black liners darken up the red nicely.
Re: St. Nick's Knives Exclusive Para 3
There are 21 4V Para 3s on eBay. :eek:
Can you find it and can it cut? :eek:
Re: St. Nick's Knives Exclusive Para 3
That's crazy! Those flippers need to not be so greedy all at once. Geeez, give them a couple weeks.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: St. Nick's Knives Exclusive Para 3
What puzzles me, is that these exclusives as of late are selling for more than sprint runs. This red para3 is fetching more than the rex45 right now. Buyers are even paying more for the REC para3 than a Darn Dao! It’s crazy. Is it just because the runs are smaller batches?
Re: St. Nick's Knives Exclusive Para 3
Exclusives prices are set by the dealer which commissioned the run and they pay up front for the whole lot, while spyderco sets the sprint prices. Both sprints and exclusives are not bound my MAP pricing rulesDirtMcGirt wrote: ↑Fri Sep 28, 2018 7:51 amWhat puzzles me, is that these exclusives as of late are selling for more than sprint runs. This red para3 is fetching more than the rex45 right now. Buyers are even paying more for the REC para3 than a Darn Dao! It’s crazy. Is it just because the runs are smaller batches?
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: St. Nick's Knives Exclusive Para 3
My fault, I should’ve said I was referring to the secondary market. I’m just puzzled what makes them command such high prices when compared to other sprints, and even the flash batches. On the secondary market that is.Spydergirl88 wrote: ↑Fri Sep 28, 2018 7:53 amExclusives prices are set by the dealer which commissioned the run and they pay up front for the whole lot, while spyderco sets the sprint prices. Both sprints and exclusives are not bound my MAP pricing rulesDirtMcGirt wrote: ↑Fri Sep 28, 2018 7:51 amWhat puzzles me, is that these exclusives as of late are selling for more than sprint runs. This red para3 is fetching more than the rex45 right now. Buyers are even paying more for the REC para3 than a Darn Dao! It’s crazy. Is it just because the runs are smaller batches?
Re: St. Nick's Knives Exclusive Para 3
The only thing I can think of is the st nicks and rivers edge para 3's both were smaller runs than 1200 maybe?DirtMcGirt wrote: ↑Fri Sep 28, 2018 8:12 amMy fault, I should’ve said I was referring to the secondary market. I’m just puzzled what makes them command such high prices when compared to other sprints, and even the flash batches. On the secondary market that is.Spydergirl88 wrote: ↑Fri Sep 28, 2018 7:53 amExclusives prices are set by the dealer which commissioned the run and they pay up front for the whole lot, while spyderco sets the sprint prices. Both sprints and exclusives are not bound my MAP pricing rulesDirtMcGirt wrote: ↑Fri Sep 28, 2018 7:51 amWhat puzzles me, is that these exclusives as of late are selling for more than sprint runs. This red para3 is fetching more than the rex45 right now. Buyers are even paying more for the REC para3 than a Darn Dao! It’s crazy. Is it just because the runs are smaller batches?
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: St. Nick's Knives Exclusive Para 3
I think I saw somewhere that St Nicks was only about a 520 piece run? Will certainly pay off for the flippers, especially being the first Spyderco released in 4V.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: St. Nick's Knives Exclusive Para 3
Nice, you got one! I figured you would be all over this one. If they do a PM2 in this configuration I’m going to be in n hog heaven:) did you end up finding a Bladehq dlc Para 3?steelcity16 wrote: ↑Mon Sep 24, 2018 11:31 amHere she is...absolutely flawless. My new instant favorite. Thanks again to everyone at St. Nicks for creating this amazing knife in an underappreciated steel and making sure your website was able to handle the inevitable feeding frenzy! :)
I really hope they do what BHQ is doing with Jade/M4 and run through the whole lineup in this combo. Maybe adding a stonewash option so doing half DLC and half stonewash in each model like BHQ has done for some.
I still wish spyderco could come up with a good solution to get the liners DLC coated on compression lock knives. It would look much better than the mix of stainless and DLC hardware. Especially on the semi-translucent G10 colors like Red and Jade.
Days without buying a Spyderco: 35
You always have a choice.
You always have a choice.
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: St. Nick's Knives Exclusive Para 3
rgrad80 wrote: ↑Fri Sep 28, 2018 11:10 amNice, you got one! I figured you would be all over this one. If they do a PM2 in this configuration I’m going to be in n hog heaven:) did you end up finding a Bladehq dlc Para 3?steelcity16 wrote: ↑Mon Sep 24, 2018 11:31 amHere she is...absolutely flawless. My new instant favorite. Thanks again to everyone at St. Nicks for creating this amazing knife in an underappreciated steel and making sure your website was able to handle the inevitable feeding frenzy! :)
I really hope they do what BHQ is doing with Jade/M4 and run through the whole lineup in this combo. Maybe adding a stonewash option so doing half DLC and half stonewash in each model like BHQ has done for some.
I still wish spyderco could come up with a good solution to get the liners DLC coated on compression lock knives. It would look much better than the mix of stainless and DLC hardware. Especially on the semi-translucent G10 colors like Red and Jade.
Yep, I grabbed a few extras through trades as well! :) Not yet on the DLC M4 Para 3, I still need to track one down.
I would imagine a PM2 in this combo will be coming at some point. Any half way decent PM2 or Para 3 exclusive is essentially printing money for dealers. I'm hoping to see this combo in all of the Golden models at some point, even (especially) the LW models.
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: St. Nick's Knives Exclusive Para 3
Stay tuned! I'd be really surprised if they didn't do a run of PM2s. I'm pretty sure it's only a matter of when.
Of all the things I've lost I miss my mind the most!
Re: St. Nick's Knives Exclusive Para 3
I bet the pm2's would sell out in 15min
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: St. Nick's Knives Exclusive Para 3
I was thrilled that they did a “1 per order” at checkout so we could have a sec to grab one of the Para 3s.
Days without buying a Spyderco: 35
You always have a choice.
You always have a choice.
Re: St. Nick's Knives Exclusive Para 3
They have stated on their Instagram page (in comments) that a PM2 is coming, but I don’t think we can expect it any time soon from the way they worded it.
Re: St. Nick's Knives Exclusive Para 3
The real reason I had to have a red para 3 :cool:
Anyone else still waiting on theirs?
Anyone else still waiting on theirs?
Re: St. Nick's Knives Exclusive Para 3
I had the same thought hahaha! Literally just finished taking my pic "fire/water/ice"
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: St. Nick's Knives Exclusive Para 3
I'm starting to think the St Nick Para 3 is the best looking or at least in the top 2 Para 3s so far. This would be my other choice.
Can you find it and can it cut? :eek:
-
- Member
- Posts: 197
- Joined: Tue Aug 14, 2018 4:03 pm
Re: St. Nick's Knives Exclusive Para 3
I concur. The red and black is a great look but the desert tan/OD green is timeless IMO.
CPM S90V
Maxamet
CPM-M4
M390
CPM 20CV
Lc200N
CPM-S45VN
Maxamet
CPM-M4
M390
CPM 20CV
Lc200N
CPM-S45VN