Page 2 of 4

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 2:59 pm
by Kiteman72
toocool006 wrote:
Tue Jul 31, 2018 2:16 pm
Looks to be in stock at GP knives https://www.gpknives.com/spyderco-delic ... fpble.html
Their video shows a stainless clip and the description states that it's black. I suppose one should believe one's eyes, right?

The pic in the 2018 product guide shows a black clip. I would much rather have the stainless, so I hope the video is representative of what is actually on this knife.

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 3:05 pm
by RamZar
The picture at KnifeWorks also has stainless clip (not black like the Spyderco website).

Image

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 3:10 pm
by ZrowsN1s
I wish I knew if they were going to make a wharnie version of this.

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 3:11 pm
by Kiteman72
Awesome! I think the stainless looks fantastic on there! Did the Endura have a silver clip as well?

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:07 pm
by shunsui
Blue and silver always looks good.

I'm not a big Delica fan, but the Endura was so nice I ordered the Delica too.

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:13 pm
by fixall
So... They typically stagger the releases for the different models with these Sprint runs correct? As in, it will likely be at least a week or so before we see the V-Toku2 Dragonfly? Or could it drop at any moment?

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:21 pm
by ABX2011
fixall wrote:
Tue Jul 31, 2018 6:13 pm
So... They typically stagger the releases for the different models with these Sprint runs correct? As in, it will likely be at least a week or so before we see the V-Toku2 Dragonfly? Or could it drop at any moment?
The Endura V-Toku2 was released about 8 weeks ago. So maybe we'll see the Dragonfly in a similar time frame.

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:28 pm
by Woodpuppy
These things are flyin off the shelf!
Folks must really want this steel.
ZrowsN1s wrote:
Tue Jul 31, 2018 3:10 pm
I wish I knew if they were going to make a wharnie version of this.
+1!

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:30 pm
by brumledb
I snoozed on some earlier because I was waiting to here back from a different retailer but apparently they don't have any in stock yet. Dang, should have grabbed one when I had the chance earlier.

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:30 pm
by blueblur
The Endura has the silver clip and SUS410. This steel is a joy to sharpen.

I pre-ordered the Delica as soon as I heard about the run but I've been on a larger blade kick recently so picked up the Endura a few weeks ago. I'm really a fan of these high carbon steels.

Re: V-TOKU2 Delica has been released

Posted: Tue Jul 31, 2018 6:35 pm
by brumledb
I am also stoked about the Stretch. I have the Hap40 version but eager to see/feel the difference in both the ergos between Stretch 1/2 and the steel difference.

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 8:26 am
by brumledb
I was able to score one this morning at ye old cutlery and gift shoppe but looks like that was the last one they had.

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 1:15 pm
by brumledb

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 1:24 pm
by bouhunter
brumledb wrote:
Wed Aug 01, 2018 1:15 pm
In stock at Knivesplus.

https://www.knivesplus.com/spyderco-c11 ... t-run.html
And the clip is black in that picture.............. :rolleyes:

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 2:22 pm
by Woodpuppy
Does anyone have a feel for how V-toku2 compares to hap40 and M4? At this point M4 is my benchmark, no stainless need apply (cept H1 se :D )

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 3:04 pm
by Spyder_MN
Available at BHQ

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 3:35 pm
by Tom S
I have a pre-order from SMKW but no update that they have them in stock and shipping. I also was able to grab one on another site this morning. That means I'll have one or two depending on SMKW's ability to ship the knife. I'm hoping they do since I already paid but you never know with them.

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 3:46 pm
by Kiteman72
Tom S wrote:
Wed Aug 01, 2018 3:35 pm
I have a pre-order from SMKW but no update that they have them in stock and shipping. I also was able to grab one on another site this morning. That means I'll have one or two depending on SMKW's ability to ship the knife. I'm hoping they do since I already paid but you never know with them.
I grabbed one from DLT! Stoked!

But I wanted to say that my experience with SMKW has peen pretty positive, tho I haven't ever done a pre-order with them.

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 3:57 pm
by Sharp Guy
Spyder_MN wrote:
Wed Aug 01, 2018 3:04 pm
Available at BHQ
Thanks Caleb! I grabbed one from BHQ. I'll likely cancel my KC pre-order tomorrow.

Re: V-TOKU2 Delica has been released

Posted: Wed Aug 01, 2018 4:22 pm
by Slumblor
I just ordered one from DLT. I'll have to remember to cancel my KC pre-order