Spyderco Forums

Ok what do ya'll think of this.I think it may be my next knife purchase.

The show is this weekend. Anyone going?

My understanding is that the Yojimbo's handle was designed with a Fillipino {sp?) grip in mind. Can someone illuminated was a fillipino grip is? Also, I note that the pakal(sp?) grip seems to be gaining in popularity. Does the handle work well with this...

Hey the Kerambit is available at newgraham, grabem while hot

Slowly one at a Time, but someday...

Hi all,

While looking at generally poor quality of the websites out there (particularly, knifemakers ones), I would like to improve this situation by designing homepages for anyone who need it.

I'm currently employed by the major TV network as...

Has there ever been any thought of putting a small marlin spike in the back of the military.

Looks like it wouldn't be hard to do.The lanyard hole could be used as the pivot and the spike fold into the space between the back spacer and the lanyard hole....

Hey, I just wanted you all to check out my post on Bladeforums in the Spyderco Forum. Thanks!

I'm thinking about picking up a Salsa and a Temperence and I'm wondering what you folks think of them.

I'm particularly interested in a good photo of the Titanium Salsa's lock.

I'm also wanting to know more about the construction of the Temperence's...

I'd be so grateful if any of you guys & gals could suggest the best tool to use to remove the nut on the Native so I can switch the clip to the other side, or remove it. Thanks. Open to all suggestions!

I was just looking at the new graham website and saw the spyderco karambit. Am I dreaming or have I been out of the loop? It looks like a really nice knife. I've been wanting a karambit, and if There really is one made by spyderco I think that is the way...

i see on ebay they have the endura FRN. some have vg10 steel and others have ats55. which should i get?

Thanks to Kudzu74 I am getting a extra PE blue BF G10 Native.

I know will have one to carry.Its clip will be getting jeweled and colorized.

How do you think it will look on it?

Does anyone else see a use for a Ladybug sized Harpy/Merlin? Should be good for string and small packages

Better gear than good sense a traveller cannot carry.

I was wondering if anyone would be interested in the old Micarta Goddard Jr. C-16, being reissued with VG10 or S30V steel, and in Plain edge?

I obtained an old (1994?) CE one from my favorite knife store. It was hiding in a pile of what were supposed...

Borrowed a gentleman's William Henry the other day...Damascus Blade, seemed like a real Cadillac of a folder. Looked at their website...eegads. So...Any feedback? are they worth the price, or should I remain a tried and true Spydie for my next folder?

Folks, I'm curious if anyone would like to see a Black Denim shirt with a gold- embroided on it and a White Polo Tee with the same treatment.. Maybe a black- ! So, what is your take?

Sam

have scars will travel..

Hi Everyone,

I wonder if it might be possible for Spyderco with their fancy laser cutting equipment to produce some Spyderbugs out of material like skatebaord tape, with adhesive backing. I have been thinking about this of late, as I recently got some...

I have a signature in my profile and have the box checked to include it. What else is there?

This is not a Spyderco and this is not my auction but I thought you would all find it VERY interesting. This knife is on ebay and is probably the strangest thing I've seen on there. I know we can not plug auctions I also posted this at knife Forums in the...

going out to the garage to yojimbo-ize my PE rescue. First time trying something like this. Here goes

Jeff

I offer here and would like to get feedback on a alternate method I have developed for carrying and deploying large folders; I have been using it to carry my Military for over a year. Please note it should be used only in jurisdictions where it is legal...

Since most of my knifemaking is done with forged hi-carbon steel or titanium, I haven't had much of a chance to work with the exotic steels. Does Spyderco send the blades out for hardening after machining, or is everything done in house after blade...

bladeforums is back up now.

sven

steel is unforgiving... sharp steel even more so

In the short time I been reading posts here, I have acquired / discovered the new C36GPSE Military with S30V,the Photon 3 Micro-Light, and bladeforums.com, where I learned how to adjust the eccentric pivot on my Bob Lum C46.

Thanks to all for the...

Is it just me or is the site down?

Just went to work and was surprised at how hard it was to get my Dodo out of my pocket. It dawned, a little too late, that it had opened in my pocket and was busy creating a new pocket . ****. I count my blessings though as I still have all body parts...

Hi all... I have had a bent-out-of-shape Endura clip for a few months now... how would I get a replacement for that?

*

*

*

*

*

Made ya look!

ken

Hi, guys...

Don't want to sound repetitive, but any news on the release date of the Para Military ?

Regards;

I saw a while back that someone had asked about getting some of the holes that are cut out of the spydie blades and Spyderco replied that they would do it if someone agreed to distribute them.I never saw anything else about it so I emailed Joyce and asked...

I just picked up a Centofante III today. For those who don't know, the Centofante III is new version of the Vesuvius with a lockback instead of a compression lock. This version is made in Seki City instead of the USA and has a VG-10 blade instead of...

Hi, guys...

I made a terrible thing... I was cleaning my Millie and took out the blade for lubricating.

Then I put it back on, but it doesn't look right. There's a lot of blade play...

I can't send it to Spyderco because I live in Brazil, and the...

Just returned from a deployment to Southwest Asia where I commanded an engineering squadron tasked with taking down a good-sized tent city and related infrastructure. I spent a lot of time getting dirty with my troops in many teardown and pack-up tasks....

Sal, reading in the forum, I think you said that you are a straight razor user? I was wondering if Spyderco has any ideas on the drawing board for a straight razor? With the advent of technology (Mach 3 Turbo ect.), the art form of straight shaving is...

Hi guys,

Can someone tell me the difference between the Chinook I and II ?

Thanks !

aloha!

Must say, the Toad is an ugly lil' thing, but it came in extremely handy for cutting out templates for some projects the other night...on tracing paper no less! The short stout blade and longer handle really did the trick, as my Delica had some...

i'm new to the forum...anyways...

i saw a Spyderco knife the other day and it

looked like the Jester or Ladybug..same size and blade design...but it had a carbon fiber handle?(smooth but checkered underneath dark brown/reddish color)

i can't seem...

Today, I got the urge to try out a fixed blade for EDC. The problem is....I don't have one. Sooooo, within the next couple of weeks, I plan on ordering a Ronin and using it for my EDC.

What I'm curious to know is....is it comfortable for vertical belt...

I'm funding a new project (story of my life, right?) and am considering selling my Dodo.

My question is, what do you guys think a fair price for a slightly used Dodo would be?

It's the serrated edge with blue handle. I was going to list it for...

I noticed on my new Calypso Jr. that if you catch the light right it almost looks like there is a wave pattern in the steel. Is this intentional or just a natural part of the grinding process?

first pic is blade, second pic is 100% crop closeup....