Spyderco Counterfeits, Clones, Replicas, etc. A place to list and reference all Spyderco counterfeits, clones, and replicas that are found. Anything that isn't a legitimate Spyderco fits in this area.
This forum has some of the most kindhearted people that I have ever met . So many of you are always willing to help someone in need. It is for that reason that I felt I had to post this.
Recently there was someone who posted about challenges they were...
SE are the bees knees and you need to get with the program. Just as with PE knives, not all SE knives are created equally and different combinations perform better than others. Towards the end there's a bit of why I'm bothering with all this if...
I’d like to thank all of you for the great information on the issue mentioned. My primary purpose for the thread was more to raise awareness that it is a problem and hope that just the greater awareness would help contribute...
There has been some discussion and fair amount of frustration on the question of Spyderco choosing not to ship internal parts. The subject is far more complicated than it might appear on the surface. Some of the questions that...
One of Spyderco's finest high-end folders to date if you ask me. Splendid fit and finish, stellar blade and ergos....and yet it doesn't seem to be very popular even among the ''connaisseurs''. Most seem to gravitate around the same 5-6 models. I wonder...
For me, i think it is. Well, maybe receiving the first Siren and Waterway topped this but nothing else! I haven’t felt this kind of excitement over a new knife in YEARS!
I’ll offer some very brief initial observations on both knives.
I’ve been absolutely blown away by how excellent the Jumpmaster 2 SE is at work, so I’ve started looking to see if I can find a larger H1/H2 fixed blade for use in place of my machetes and parang that I hack really thick but soft materials up with (think...
I'm wondering how many people use a lanyard on a pocket knife. To me, it's a useless ugly hole that in many cases interferes with the position of the pocket clip so the knife cannot be deep carried. A lanyard is useful on a fixed blade for retention when...
I have seen posts on this forum about PM2 fatigue from all of the sprint runs and production models and I have also seen people jump off of their seats for exclusive pm2 drops which suggests that the pm2 is far from the end of its life. Recently we have...
I have been looking around for a new flattening technique for my whetstones and I was hoping to pick the brains of anyone who has used any of the various methods I'm considering.
The first method is adhesive backed sandpaper on glass. I have used Wet or...
That Spymyto is a sweet looking knife. Wonder when it will be released? Also pricing, hope it's more in the Swayback pricing range and not the Paysan...
Every week I see some really great pics on this forum so I thought we could have a weekly competition. The competition will last from Monday to Sunday and the winner and runner up will be announced on Sunday evening. The winner will be the judge for the...
To kick off this thread, I'm going to use 10V from the rivers edge run on the pm2. I tested the more recent Para 3 and it matched the pm2 in terms of wear resistance. The 10V runs have been compared to the bento...
Just got my monthly email from tactical elements. They have some rare Spydies.
Two Spot neck knives, two vintage clip it Delicas, a gunting trainer, and a salsa with a collector # (why I didn't get it).
Greetings, friends!There was another question about Civilian.What is the full angle in degrees of sharpening of this knife?Is the sharpening V-shaped or one-sided? I want to sharpen the knife to a mirror shine )I have a Tri-Angle with ceramic rods.I saw...
Hey guys, I'm looking for a knife that's great for fileting, deboning fish and these types of tasks and while looking at the Ikuchi I hthought this would be trhe perfect knife to have for such tasks.
The blade length is not too shirt, but what cought my...
Recently I launched a thread asking you folks which 3 of the older models you all would like to see in a Sprint Run. The one model that just kept coming up over and over again was the C-60 Ayoob model. It just makes perfect sense to take a hard look at a...
I wish Spyderco would send a YouTuber one of these to film a tutorial. Has it been a year since it came out? The method they describe in the manual seems designed to cut your off-hand when you switch sides, so I switch holding the knife between right and...
I haven't been on this forum much for a while and very honestly it was because the S90V para 3 Lightweight had become my one and done knife. I had found my perfect edc knife so I didn't really feel as much need to learn and talk about knives.
So wanted to hear some input on this. I’ve been completely enamored with the Stretch XL since I first saw the prototype at the Blade show a few years ago. Wonderful design and IMHO a more refined design than any of the previous Stretches. I didn’t need...
Curious to hear if anyone else is up for a Resilience in CPM-M4?
I'm up for at least a pair. The M4 Tenacious has a wonderfully thin grind behind-the-edge, and has been a joy to use, without having to modify. M4 is a killer steel, to boot, and surely...
Post about your sharpenings. Brand, grit, abrasives, grit progression, desired edge finish, decision making in sharpening, whatever you want. Might be interesting to see what people use for certain tasks, and will give insight into the results of others'...
Seki FRN lockbacks (Endura, delica, endela, stretch 2lw, ect..) are my favorite spyderco models, the combo of comfortable handles and great cutting geometry really works well for me. However most of mine have lock rock when really bearing down on a...
Sal has mentioned many times the past experience with S60V/440V and the steel not being able to achieve a useable high working hardness and also being miserable to sharpen at lower hardness.
It seems with CPM S60V, things have changed in recent years...
I noticed a little bit of rust underneath the scale on my H2 Dragonfly salt, so I decided to take it apart and see how bad it was. I saw that the back lock has several spots of rust on it. This knife hasn’t been exposed to any chemicals and it’s only been...
What are the Spyderco CTS XHP knives? I recently pulled out my Bowie and so enjoyed using it. With all the new steels out there I kind forgot about it.
I read it likes a polish, going to try that.😀
I purchased the stretch XL H2 SE when DACK had it for $75 on a whim. I’m glad I did as I now understand what all the fuss is about with the SE and the model. There is a lot of blade for the handle size. I’m a plain edge kind of guy, but the SE blade seems...
I usually touch on this subject at least once a year. And we've gotten some really interesting results as to the models that folks would love to have in FULL SE. After all Spyderco really made their name and put themselves on the map by producing arguably...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
