Spyderco Forums

Does anyone know what the grey medium and white fine Sharpmaker stones are equal to grit wise? and would anyone like to comment on the diamond rods for reprofiling? Thanks.

Ho,Ho, Ho, Ho I just heard as I saw a glimpse of Santa's flashy red robe flashing out the door... What did he leave under the tree for me???

A wonderful new Casio G-Force Rayrider MTG-930D Watch. All equiped with the latest technologies like Wave Ceptor...

Hi,

Just testing out my new camera. One pic of a Blanchard Damascus Worker I picked up.

Any feedback would be appreciated.

Thanks

Dave

This morning, much to my suprise, the mailman left a padded envelope for me in my mailbox. Inside of this envelope was a Spyderco bug pin, as well as an ATR pin (...An ATR pin?...Joyce, don't you know that I'm into the Police model?...:D), a nice...

Hello, everybody.

First, many thanks to mr. Sal Glesser for the beautiful SS Dragonfly he sent to my new born son, Paul. This way I was also able to test it and add here my 2c. oppinion.

The Dagonfly is a great knife the way it is. I found it very...

Ted - I've sent you a message/Card yesterday and it bounched right back. So now I try to contact you via the Forum. No ADSL yet. Gaby refused the idea of a new Labtop so I'll put the network ideas in the fridge for a while. However, I still want that new...

I am the lucky owner of a 2002 forum Vesuvius. Action is a little scratchy, so I decided to do the BAAAD thing:

I took it apart, gave it a nice ultrasonic cleaning, polished some parts which had rough edges (like the stop pin... it scratched at the liner...

Hope everyone had a good holiday.

I got a Lum tanto for christmas and I have some sharpening questions. When sharpening them on a sharpmaker, do you treat it as two seperate edges? As in sharpen the front, short edge and then sharpen the main edge. Or do...

Hi Guys I'm a Newbee Here and i have some Questions About the Spyderco ProFile set.

I Got the set a few months back and have since been making an absolute arse of sharpening all my Blades. I recived a Salsa that Yog sent me as part of the passaround...

Being the eve of Christmas, We traditionally get to open one present.

Okay, who(m) opened their's and got a Spydie?

What say the augurers?

AET

All that is necessary for the forces of evil to win in the world is for enough good men to do...

In your preparation of 'engaging' a person...Do you find yourself leaning toward your target?

I find myself standing upright just in case I need to back off of my aggressor. Is this a good thing? Let me know your thoughts.

TQ

A few folks have been asking for pix of the new Jr. I just picked a couple up from SFO today. VERY NICE.
View Attachment...

View Attachment...

anybody know the handle thickness of the Ronin ?

thanks and happy holidays

Is there one book or video that really stands out as a must have for showing techniques that can be used with Mr. Keatings Chinook design?

Does any on-line dealer have the new Spyderco grey Calypso jr yet?

Does any on-line dealer have the new Spyderco grey Calypso jr yet?

I am trying to get one in time for christmas, but don't want to pay full msrp.

Thanks in advance.

Hey I just wanted to wish everyone a Happy Holiday and a Merry Christmas. Just remember Jesus is the reason for the season. I hope you have an enjoyable holiday with your families and maybe a few new spydies!

I'd love to see actual pic's, close-ups, etc.. ie more detail than the one on the main spyderco.com page.

If somebody has done this, can you show me the link? I tried searching with no luck.

Thank you.

To All:

As promised, here are some pictures of the first Yojimbo/Folding Ronin prototype.

Stay safe,

mike j
View Attachment...

View Attachment...

received today a Spyderco Wenger Mouse.

i LOVE IT.

the champagne alu handles and the blade design are wonderful, the finish is terrific (as usual)..i'm only afraid to nick the handles (infact i did)

and is another great deal at 40 (was the last at...

has got to be the person that came up with the idea to put the 23,542 twist ties on every single toy made.It took me a full 15 min just to get one out of the box this morning and that was with useing my military and wire cutters.Then there is the deal...

Not that your using knives must be , what

knives will you be using during the holiday

season?

Me : Steak knive ( already @ time of this post ), butter knife & of course, the SE

Cricket ( open packages )

What say the augurers?

AET

All that...

Hey everybody, what do you use your spydie for? (in other words does it actually work or does it stay in your pocket )

From the snowy North, to Sal, the Spyderco Crew and all Forums Members - I wish you all a safe and happy Holday Season!!!

Thanks for all the great times over the past year here on the Spyderco Forum!

David

Not all who wander are lost

I meself gave up on packin' heat , but for the benefit of the rest of you, what pistol,

revolver, rifle and/or shotgun goes with your vaunghted Spydie?

I used to have an Erma KGP-68A ( .380ACP )

and various military / used surplus pistols.

Even a...

I got a Native II for Christmas, and I'm a little worried about it. When I open it, it feels almost as if where the blade and handle come together is too tight, like it's pinching slightly. I can feel it rubbing. Does it just need breaking in or is this a...

I just bought one of these from the Discontinued page on the website. It looks like a great knife at an even better price. Does anyone else here own one? What are your observations or experiences?

Thanks

CCV

I was wondering what meat is served at Christmas where you live.I know it must be differant from country to country and state to state.

Here the dinner is usally as follows

Ham

potato salid,german sour kind not the sweet american.

Rasin sause to go...

I got mine today. Spyderco, as usual, has done an outstanding job in bringing us this piece. Fit and finish are outstanding. It has real bolsters! I can't believe it is selling for the price it is. In all honesty I would have expected the MSRP to be more....

I have a Delica with an ATS55 blade, now I see it is also available in VG10.

Which is the better steel? Why the change?

Best wishes to all my fellow forumites.

May your 2004 be filled with Spydery Goodness!

-Rorschach :][: HOS

I admire your professionalism here and at BFC regarding the BM/Blackwood debate. I think sometimes those guys just like to hear themselves type over at BFC. It irks me that BM/Blackwood can do this. The attacks that Spyderco should not be able to...

Would anyone be interested in buying a HK Q knife?

The SE Toad is one of my favourites. But I am always a bit nervous of using it because I'm afraid of breaking the very slender and delicate looking tip. Has anyone put some hard use on theirs/broken the tip? Are replacement blades available?

To completely Bite Mike Janich's style, I am going to LA for Christmas, to visit My girlfriends Family. I'm Probably going to teach a 2-day Gunting Seminar, While there. Details have yet to be worked out, but if you're interested, shoot me an Email, or...

What do you prefer for every day carry and why?

Greetings Spyderphiles. I just posted my review of the CRKT M16 over at RHOS.

I was fascinated by these and jumped on an ebay deal. Perhaps the larger versions are a bit more robust.

-Rorschach :][: HOS
View Attachment...

Does anyone know what steels were used in the early models (80's) of the C01 (worker), C02 (mariner), C03 (hunter), C04 (executive) & C05 (economy/standard)?

I think the C01 was G-2, but don't know about the others. The C02 has been made with ATS-55...

Saluatations my fellow Arachnophiles!

I have more along the Technical Night Before Christmas post lines but will try not to clutter up the airways here. (Unless y'all think I should) I was thinking of starting this thread and recycling it to add all...

Be careful looks like the emails are going around again wanting you to enter your ebay name and password.

heres a copy of the email I just got.

Please Sign In...

For security reasons please re-enter your user ID and password....

What is the difference between VG-10 and AUS-10 steel? Thanks