I was starting to fill up my Craftsman tool box with my s. It has been a work in progress . My first step was to made an extra tray for my enduras. i put pretty good size holes on all four sides so i can pick up the it easily. here is the bottom of the drawer
and here is the tray that sits on top of all of the dowels
I started filling up my fixed blade drawer so for this i just cut a 2" X 4" down a bit and then used some black contact paper to hold the tray on top above the knives below since there isnt any dowels.
So after doing this one i started thinking about making some sliding trays
with 3 different levels. First i nailed some wood into ministeps as shown below:
i added some double sided tape to hold it in place (i need to do that with the fixed blade drawer as well now that i see the pics) and put some drawer liner on the bottom. this stuff keeps the knives from moving really well.
i built these trays with some 2 X 4s and some 3/8" MDF, glue and a brad gun. i went with butt joints instead of miters because i was doing this at the firehouse and the chop saw is not the best. i just added some paper underneath the drawer liner. if i can figure out how to do so, i would like to print in really big letters "Spyderco" or maybe "ladybug". i think that would look cool.
Then i added the second tray and them moved in the different positions