Post pictures of your sharpening jobs

[hawaiihunter]

Post pictures of your sharpening jobs and say the system you used to make them that sharp, I also need reccomendations for a sharpening system. I currently have a sharpmaker w/ diamond rods wondering if I should get the UF rods and a strop or get another system.

[rg02]

you might like this:

http://www.spyderco.com/forums/showt...w-those-Edges-!!!!!

I definitely reccommend getting the UF stones and a strop (I own the "strop block" from Knives plus) as well as a 10x or 20x loupe. This is what the Sharpmaker with UF stones is capable of



My setup

[hawaiihunter]

Thanks for the reply