Fake Delica 4?
Posted: Thu Oct 19, 2023 7:04 am
I picked up a Delica 4 second hand recently and the pivot was loose so I decided to remove it and install with some loctite. I did another Delica I have at the same time as I wanted to adjust the tension on that one as well. I mixed up the pivot screws and it winds up the new one doesn’t thread into the other knife. I found that strange but I went ahead and switched them back and all was well. It kinda bugged me though so I started looking at the knife more closely and while the frn looks 100% down to the flashing and block/divots the markings on the blade are not in the same location as my other D4. Lastly something about the spine jimping seems “off”. It looks almost like there’s casting marks in between some of them. I’ll upload some pics of the spine but I don’t have the knife on me to get shots of the whole thing. I can later if needed. I’ll also upload the other D4’s jimping to compare which looks like my other seki spydercos. Lastly the inside of the thumb hole looks almost cast too. It has a couple cuts in it but the black one and a couple other seki knives look much more “cut” in the hole. Those other seki knives were bought directly through trusted vendors. The blue one is the new one I just got, the lack one is the one I had already. Thoughts?