Spyderco Forums

Posted: **Fri Nov 03, 2023 5:22 pm**

mikey177 wrote: ↑
Fri Nov 03, 2023 9:49 am
The only way I could get them in one photo since they are in different locations. Yes, all of them get carried and used in the course of the year.

Also, on hindsight I should have been working on a higher resolution canvas.
spyderco_collection_2023_nov.jpg

Looks great Mikey ! Dan

Posted: **Fri Nov 03, 2023 7:55 pm**

Thank you, Dan!

Posted: **Tue Nov 07, 2023 9:50 am**

Of course, this is not the entire collection, only its “working”

part/

Posted: **Wed Nov 08, 2023 6:18 am**

Jaret wrote: ↑
Tue Nov 07, 2023 9:50 am
Of course, this is not the entire collection, only its “working” part/

Beautiful Jaret ! Dan

Posted: **Wed Nov 08, 2023 8:40 pm**

Quite new to this but already amassed quite the collection

Question to the more experienced folks - what do I need to try?

Posted: **Thu Nov 09, 2023 8:08 am**

Looks like a well-rounded collection. Depending on your usage needs, maybe you could try a Manix or one of Spyderco's fixed blades.

Posted: **Thu Nov 09, 2023 12:53 pm**

mikey177 wrote: ↑
Thu Nov 09, 2023 8:08 am
Looks like a well-rounded collection. Depending on your usage needs, maybe you could try a Manix or one of Spyderco's fixed blades.

Thanks! I am tempted by a Manix or Native in Rex 45. Too bad the current Manix sprint run blade is coated. I’m a fan of the patina so will wait for the next one.

Posted: **Thu Nov 09, 2023 3:21 pm**

toml4185 wrote: ↑
Wed Nov 08, 2023 8:40 pm
Quite new to this but already amassed quite the collection

Question to the more experienced folks - what do I need to try?

col.jpg

I'd check out the Manix, Manix XL, Pacific Salt, Stretch XL and Military 2 and see if any of those larger models speak to you. Very nice collection so far!

Posted: **Thu Nov 09, 2023 5:26 pm**

toml4185 wrote: ↑
Wed Nov 08, 2023 8:40 pm
Quite new to this but already amassed quite the collection

Question to the more experienced folks - what do I need to try?

col.jpg

Welcome to the Forum . You have a very nice collection going with some variety . Do you have access to any shops in your area ? If so handling some is a big plus , saves money and disappointment. If not seems like you do have some preferences. I also would suggest trying a Manix in either size . I would leave that choice up to you . MG2

Posted: **Thu Nov 09, 2023 10:44 pm**

I’ve just ordered the Manix Stormtrooper . Regarding stores, I’m not sure what’s around. I’m in NY. Any other East Coasters among us? Where are the good stores?

Posted: **Fri Nov 10, 2023 7:57 am**

Where in NY are you?

Posted: **Fri Nov 10, 2023 10:47 am**

TkoK83Spy wrote:Where in NY are you?

Long Island

Posted: **Fri Nov 10, 2023 11:30 am**

toml4185 wrote: ↑
Thu Nov 09, 2023 10:44 pm
I’ve just ordered the Manix Stormtrooper . Regarding stores, I’m not sure what’s around. I’m in NY. Any other East Coasters among us? Where are the good stores?

If you're "upstate," J.T.s Knife Shop is in Port Jervis. If you're actually upstate, in the CNY area then Fradon is in Syracuse.

The only other places I've found with actual knife counters have maaaaaaybe a combo edge Delica and a few Byrds, but mostly just Gerbers and a few super low-end cold steels.

There are also a couple shops in the CNY area that focus on traditionals, but I'm not even remotely familiar with those.

Posted: **Fri Nov 10, 2023 9:41 pm**

Posted: **Sat Nov 11, 2023 1:35 pm**

Oh my god, Jaret. I've seen several of your posts showing part of your collection each time and I can only say that you have one of, if not the, craziest collection I've seen !

I'm going to reunite all of my Spydercos for a picture tomorrow (will miss one or 2 which are at my parent's, but eh). Dimi made me think it was time to do so

Posted: **Sat Nov 11, 2023 4:53 pm**

Giygas wrote: ↑
Fri Nov 10, 2023 11:30 am

toml4185 wrote: ↑
Thu Nov 09, 2023 10:44 pm
I’ve just ordered the Manix Stormtrooper . Regarding stores, I’m not sure what’s around. I’m in NY. Any other East Coasters among us? Where are the good stores?
If you're "upstate," J.T.s Knife Shop is in Port Jervis. If you're actually upstate, in the CNY area then Fradon is in Syracuse.

The only other places I've found with actual knife counters have maaaaaaybe a combo edge Delica and a few Byrds, but mostly just Gerbers and a few super low-end cold steels.

There are also a couple shops in the CNY area that focus on traditionals, but I'm not even remotely familiar with those.

Thank you very much for the recommendations. Will definitely keep those in mind when I find myself in the area!

Posted: **Sat Nov 18, 2023 6:45 am**

Here's the picture requested

Posted: **Sat Nov 18, 2023 8:17 am**

Very nice collection

Posted: **Sat Nov 18, 2023 8:28 am**

Ramonade wrote: ↑
Sat Nov 18, 2023 6:45 am
Here's the picture requested

Posted: **Sat Nov 18, 2023 8:43 am**

Ramonade wrote: ↑
Sat Nov 18, 2023 6:45 am
Here's the picture requested

Looks great Robin ! Get busy on the Mule scales !

Dan

Spyderco Forums

Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!

Re: Post your Spyderco collection in one picture!