Spymyto is hot!
Re: Spymyto is hot!
LionSteel Myto does come with a tool which includes T6 & T8 plus a hex screw remover. T8 is for scale and pivot screws, T6 is for the removable flipper tab and the hex is to remove the clip screw. Myto comes with the tungsten carbide glass breaker screw for the clip but you can replace it with the included flat screw or put the clip on the reverse side. Once you’ve removed the flipper tab you can plug the hole with another included T6 screw. In some countries you can have a locking folder but it can only be opened with two hands.
I don’t know if these are all included in the SpyMyto package.
I don’t know if these are all included in the SpyMyto package.
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: Spymyto is hot!
"Very cool model... but mixed bag" - part two
- Really like frame locks, but not the deep carry clip... and it seems a bit more challenging here to get a NON deep carry alternative (if I got that knife, I´d probably just try and make a "shallow" carry solution myself).
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Spymyto is hot!
SpyMyto has a run of 2000 pieces so there should be plenty to go around.
In Reveal 14, the MSRP was listed as $330.00 so we’ll have to see what the final street pricing is ($231.00-$247.50).
In Larrin’s Stainless Steel chart M398 had the second highest Edge Retention with still very good Corrosion Resistance.
In Reveal 14, the MSRP was listed as $330.00 so we’ll have to see what the final street pricing is ($231.00-$247.50).
In Larrin’s Stainless Steel chart M398 had the second highest Edge Retention with still very good Corrosion Resistance.
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: Spymyto is hot!
So… any idea when this will arrive? I’d thought the purpose of Reveals was that knives shown in them were within 3 months of shipping. Did something happen?
I’m really looking forward to this knife and don’t want to miss out. It’ll be my first flipper, first Lionsteel, first deep carry, and I don’t have a micarta handled knife any more, so I need one. The steel is great and the design is really nifty and wouldn’t look out of place in Blade Runner.
I’m really looking forward to this knife and don’t want to miss out. It’ll be my first flipper, first Lionsteel, first deep carry, and I don’t have a micarta handled knife any more, so I need one. The steel is great and the design is really nifty and wouldn’t look out of place in Blade Runner.
Re: Spymyto is hot!
90-120 days was the original projection for products featured in these reveals. Even still, the reveals are just estimates, at best. Delays are not uncommon.Sildani wrote: ↑Tue Feb 06, 2024 6:49 amSo… any idea when this will arrive? I’d thought the purpose of Reveals was that knives shown in them were within 3 months of shipping. Did something happen?
I’m really looking forward to this knife and don’t want to miss out. It’ll be my first flipper, first Lionsteel, first deep carry, and I don’t have a micarta handled knife any more, so I need one. The steel is great and the design is really nifty and wouldn’t look out of place in Blade Runner.
- Nick
-
- Member
- Posts: 147
- Joined: Sun Nov 07, 2021 8:08 am
Re: Spymyto is hot!
It was mentioned by Eric Glesser of Spyderco in a SHOT Show video:
https://youtu.be/e2GOsed_NCM&t=14m22s
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
-
- Member
- Posts: 147
- Joined: Sun Nov 07, 2021 8:08 am
Re: Spymyto is hot!
I saw the video. Thanks man! Its fun to watch Eric G. explain the knives...RamZar wrote: ↑Wed Feb 07, 2024 1:46 pm
It was mentioned by Eric Glesser of Spyderco in a SHOT Show video:
https://youtu.be/e2GOsed_NCM&t=14m22s
Alex
Scientia et pax
Scientia et pax
Re: SpyMyto ETA
A European dealer has an ETA of May 10, 2024.
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
-
- Member
- Posts: 147
- Joined: Sun Nov 07, 2021 8:08 am
-
- Member
- Posts: 92
- Joined: Sat May 06, 2023 9:07 pm
Re: Spymyto is hot!
Any updates on the release now that we should be very close? Any leaks or hints its almost here?
Re: SpyMyto ETA
That European dealer now has an ETA of June 21, 2024.
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
- Buddafucco
- Member
- Posts: 3357
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: Spymyto is hot!
*These knives are on the way from Spyderco and will be arriving shortly, after arrival, stock knives will ship out immediately and orders with modifications will be done soon to follow and ship when completed!*
Looks like a short preorder at Way Of Knife... https://www.wayofknife.com/spyderco-spy ... atin-m398/
Edit: Out of stock
Looks like a short preorder at Way Of Knife... https://www.wayofknife.com/spyderco-spy ... atin-m398/
Edit: Out of stock
Last edited by Buddafucco on Tue Apr 30, 2024 6:51 pm, edited 1 time in total.
•• Beau
-
- Member
- Posts: 92
- Joined: Sat May 06, 2023 9:07 pm
Re: Spymyto is hot!
Youre the best Buddafuco. Just snagged a pre-order so I dont have to chase the releases! Thank you very much!Buddafucco wrote: ↑Tue Apr 30, 2024 3:41 pm*These knives are on the way from Spyderco and will be arriving shortly, after arrival, stock knives will ship out immediately and orders with modifications will be done soon to follow and ship when completed!*
Looks like a short preorder at Way Of Knife... https://www.wayofknife.com/spyderco-spy ... atin-m398/
The rounded spine and hole on this knife are sweet. Micarta is great. Im looking forward to it.
Thanks to BBB Shawn for encouraging me to handle this and turning me onto the first frame lock that I liked!
Re: Spymyto is hot!
A total of around 2000 of the SpyMyto are being produced so there should be plenty to go around worldwide. Great to see it priced at the old MAP price of 30% off MSRP.
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: Spymyto is hot!
Knifeworks just had some, so they are hitting the dealers now!
- MidnightCoalCo.
- Member
- Posts: 39
- Joined: Sun Apr 11, 2021 6:15 pm
- Location: East Coast
Re: Spymyto is hot!
I was lucky enough to be sitting at my computer when the email came through that they were in stock at Knifeworks so I snagged one up immediately.
Spyderco enthusiast with way too many to list.
Re: Spymyto is hot!
I saw on FB that some people were able to get them in person at SFO.
Re: Spymyto is hot!
Since the Myto is hollow my guess is that lionSTEEL tried to do hollow on M398 and saw that it was too brittle or too expensive to grind and changed to flat.
Still interested in receiving mine when they hit Europe to see how it cuts !
Still interested in receiving mine when they hit Europe to see how it cuts !
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: Spymyto is hot!
Most every place says it’s out of stock; is that because all the preorders are spoken for, or because they haven’t received them just yet?