Which spyderco is in the mail?

[MFlovejp]

ZDP Endura and a double stuff 2. One of my favorite steels and a stone I’ve been very interested in. Can’t wait!

[mikey177]

Found a Spyderco Des Horn still in stock at the only cutlery carrying Spydercos in my department (maybe county is a better word for this?). They sell the S30V PM2 at 230€, and the Des Horn at the same price. I knew what to pick up .

This Rhino arrived earlier today.rhino_01.jpg

I'm curious to know what you'll think of it after some carry and use ! It's a model that I've been interested in for a while now. I really like Spyderco's XHP, but only have it on 2 knives.

I'm very sorry for the late reply. I'm one of the worst persons to ask for a long-term review as I tend to bring a different knife every day.

During the handful of times I've carried the knife, I found it to be comfortable in hand. I can just get a full four finger grip on it, but I have smaller hands than most on the forum.

My Rhino doesn't drop shut when I unlock the compression lock, perhaps due to the light weight of the blade. I actually prefer it that way, as opposed to the Yojimbo 2 or Amalgam, which feel like a guillotine when closing.

The trailing point was a bit tricky to use when stabbing into something, as I only have two knives with this profile and haven't attained the needed muscle memory for it.

CTS-XHP is a joy to touch up on the Sharpmaker and a strop. It's one of my favorite steels from Spyderco. Hope this helps.

[Ramonade]

I'm curious to know what you'll think of it after some carry and use ! It's a model that I've been interested in for a while now. I really like Spyderco's XHP, but only have it on 2 knives.

I'm very sorry for the late reply. I'm one of the worst persons to ask for a long-term review as I tend to bring a different knife every day.

During the handful of times I've carried the knife, I found it to be comfortable in hand. I can just get a full four finger grip on it, but I have smaller hands than most on the forum.

My Rhino doesn't drop shut when I unlock the compression lock, perhaps due to the light weight of the blade. I actually prefer it that way, as opposed to the Yojimbo 2 or Amalgam, which feel like a guillotine when closing.

The trailing point was a bit tricky to use when stabbing into something, as I only have two knives with this profile and haven't attained the needed muscle memory for it.

CTS-XHP is a joy to touch up on the Sharpmaker and a strop. It's one of my favorite steels from Spyderco. Hope this helps.

No problem, I was asking because CTS-XHP is also a steel I love from Spyderco. I can sharpen it to a pretty high grit and it keeps its bite. A fellow french AFI was selling his Rhino, but I ended up buying the Sun&Moon Chaparral . I think that overall, the geometry and blade shape will be better for me.

I have nothing against a trailing point, but I prefer for it to be on a 3.5" blade or more !

[CAD]

Waiting on a Sage 5 LW to be delivered

[JRinFL]

Uptern and a Rex45 Native.

[mikey177]

That's good to hear, Ramonade. The Chaparral is always a solid choice.

[Manixguy@1994]

Manix XL with a bit of a twist . MG2

[JSumm]

Manix XL with a bit of a twist . MG2

Woohoo!! Can't wait to see it.

[Liquid Cobra]

Happy to say the new green ukpk is in the mail!

[cycleguy]

Same here. Green UKPK and a spyderco coin.

[legOFwhat?]

Native 5 s90v fluted carbon fiber, finally! Denim micarta scales with matching lanyard tube.
Another Byrd cara cara2 rescue (such a great knife you should have multiples of).

[Manifestgtr]

Stretch XL

I was holding out for either a k390 variant or some sort of exclusive but finally caved…vg10 is great and there’s nothing wrong with a base model. Some of my favorite knives are vanilla variants so hey…should be in on Monday

[harpo1]

Since July 1st here are my purchases.
Para 3 S45VN
PM2 Cruwear
Manix 2 Spy27
Sage 5 M4
Native 5 M4
Endura K390
Tenacious S35VN
Diamond Rods for the SM
CBN Rods for the SM
All the 2x8 bench stones
3x8 CBN bench stone
Double Stuff 2
Medium Pocket Stone

Finally on the way are the:
Yellow UKPK LC200N
Native 5 Maxamet
Chaparral CTS-XHP

If my wife ever finds out I'm dead. The last on my list will be a Shaman. I just want one in a steel I don't already have so it may be a while before I get my hands on one.

[On Edge]

Cutlery Shoppe Ninja Pumpkin Para 3 LW.

[TkoK83Spy]

Native 5 s90v fluted carbon fiber, finally! Denim micarta scales with matching lanyard tube.
Another Byrd cara cara2 rescue (such a great knife you should have multiples of).

That sounds like a killer Native!! Do post pics when you get it.

[Ranger_Ike]

Not really a spyderco I guess, but I ordered some Rockscale Designs titanium scales for my m390 manix 2. Curious to see how the feel in hand.

[Manixguy@1994]

Ordered another Stretch XL with a twist , miss my gifted one . MG2

[Buddafucco]

Since July 1st here are my purchases.
Para 3 S45VN
PM2 Cruwear
Manix 2 Spy27
Sage 5 M4
Native 5 M4
Endura K390
Tenacious S35VN
Diamond Rods for the SM
CBN Rods for the SM
All the 2x8 bench stones
3x8 CBN bench stone
Double Stuff 2
Medium Pocket Stone

Finally on the way are the:
Yellow UKPK LC200N
Native 5 Maxamet
Chaparral CTS-XHP

If my wife ever finds out I'm dead. The last on my list will be a Shaman. I just want one in a steel I don't already have so it may be a while before I get my hands on one.

That's a heck of a month Harpo!
Welcome to the forum... You're going to fit right in!

[Sharp Guy]

...The last on my list will be a Shaman.

Yeah right! We've heard that a few times. I've said it myself a few times. You're not fooling anyone here

[Sharp Guy]

Happy to say the new green ukpk is in the mail!

That's one I think I'm going to pick up. I'll call it my pool knife