C-60 Ayoob Campaign: No I Won't Shut Up
-
- Member
- Posts: 29
- Joined: Mon Dec 07, 2020 8:07 am
Re: C-60 Ayoob Campaign: No I Won't Shut Up
Does the blade shape rule out certain steels? It's tough to envision in a matte blade finish, but maybe I'm too hung up on the look of the original. I feel like it should even have a yellow spyder on the clip. :D
Re: C-60 Ayoob Campaign: No I Won't Shut Up
One reason why I think it may not be SPY27 is that the maker needs to work with the steel first before they use it, right? SPY27 is a newer steel (and it seems to be in limited supply), which leads me to believe that it may not be that steel. I hope I am wrong. Seki has worked with S30V, Cru-Wear, K390, 204P, what else am I missing? One of those steels might be a better choice.
Re: C-60 Ayoob Campaign: No I Won't Shut Up
I've 100% had my mind made up on a serrated Ayoob, but honestly I don't care, your second guess of maroon and Cru-wear in plain edge would be perfectly fine with me! Has there ever been any Cru-wear in serrated edge?
Who am I kidding :rolleyes: .......I want a serrated Ayoob!! I already have one in PE.
Re: C-60 Ayoob Campaign: No I Won't Shut Up
If it doesn't have the yellow bug, I'm going to be sorely disappointed! I've brought up that suggestion several time in this thread!ChopSliceStab wrote: ↑Wed Dec 09, 2020 4:05 pmDoes the blade shape rule out certain steels? It's tough to envision in a matte blade finish, but maybe I'm too hung up on the look of the original. I feel like it should even have a yellow spyder on the clip. :D
- PayneTrain
- Member
- Posts: 1556
- Joined: Sun Mar 02, 2014 12:30 pm
- Location: CT
Re: C-60 Ayoob Campaign: No I Won't Shut Up
But what if it's something ancient like S60V?
"Be the person your dog thinks you are."
- TenGrainBread
- Member
- Posts: 311
- Joined: Thu Oct 15, 2020 9:52 am
Re: C-60 Ayoob Campaign: No I Won't Shut Up
See what Sal has said on S60V. They will no longer use it.
sal wrote: ↑Thu Jun 14, 2018 10:15 amHi Shawn,
Spyderco was the first production company to use Crucibles particle metallurgy in production knives. I personally went to Crucible with crew to begin the project in the mid 90's. We began with S60V while is was still being called CPM 440V. We had no problem getting it hard, but in a hi 50's to low 60's it was so brittle that it would crack if dropped on concrete. We continue to experiment until we reached the conclusion that 55/56 worked best for the steel in knife blades. In the end, we dropped it. It was too hard to sharpen for customers, though edge retention was good. I don't think we would use it again.
sal
Re: C-60 Ayoob Campaign: No I Won't Shut Up
I wouldn't mind S60V for Spyderedges but not for plain edges. I would rather try this SPY-27 for plain edges. Because 440V (S60V) has proven itself for serrated edges but for plain edges I've found better. I could use my 440V, SE Native for really brutal jobs and it wouldn't chip a bit. It would endure some major punishment in SE. I still watch out for old Spyders with SE, 440V blades when I can find them.
And Sal wasn't lying at all when he pretty much said that 440V (S60V) is a monster to sharpen>> BECAUSE IT IS A MONSTER TO SHARPEN :eek: . I actually learned new curse words at times I would sharpen those 440V blades :D
-
- Member
- Posts: 326
- Joined: Sat Jun 16, 2018 12:56 pm
Re: C-60 Ayoob Campaign: No I Won't Shut Up
I was thinking this same thing. The only one I know you missed is LC200N. The new green Pac Salt 2 is made in Japan and uses it. Also, I wouldn't think it would be K390. That's European and Sal said the steel has to be shipped from America to Japan. I mean, they could ship it to the U.S. first and then to Japan, but that seems unlikely. I guess I'm not sure where LC200N comes from so I don't know if that's feasible either.p_atrick wrote: ↑Wed Dec 09, 2020 4:08 pmOne reason why I think it may not be SPY27 is that the maker needs to work with the steel first before they use it, right? SPY27 is a newer steel (and it seems to be in limited supply), which leads me to believe that it may not be that steel. I hope I am wrong. Seki has worked with S30V, Cru-Wear, K390, 204P, what else am I missing? One of those steels might be a better choice.
- TenGrainBread
- Member
- Posts: 311
- Joined: Thu Oct 15, 2020 9:52 am
Re: C-60 Ayoob Campaign: No I Won't Shut Up
It's made by a German company called ZAPP.Frozenspyder wrote: ↑Wed Dec 09, 2020 8:57 pmI guess I'm not sure where LC200N comes from so I don't know if that's feasible either.
Re: C-60 Ayoob Campaign: No I Won't Shut Up
bearrowland wrote: ↑Wed Dec 09, 2020 10:49 amI'd be surprised if it didn't set a record time in being sold out.
Once we get a drop date I'm taking that day off work. I'm not playing games with this one.
All SE all the time since 2017
~David
~David
Re: C-60 Ayoob Campaign: No I Won't Shut Up
I would be very surprised if this is a fast seller and hard to get. I think those who want one, will get one easily.
- Nick
Re: C-60 Ayoob Campaign: No I Won't Shut Up
I can easily see your point, in the big picture how many people know who Massad Ayoob is? How many people outside of here know about this sprint that JD has lobbied sooo hard for? And how many people actually know there's such a thing as a C60 Ayoob knife to start with?
But I ain't taking no chances!! I want to be able to say I've been a part of this entire process from start to finish, that includes me securing this C60 sprint the day they're released! You may be very right.....but what if you're not? :eek:
Re: C-60 Ayoob Campaign: No I Won't Shut Up
Then I better be ready to buy when they're released as well! :Dbenben wrote: ↑Thu Dec 10, 2020 8:05 amI can easily see your point, in the big picture how many people know who Massad Ayoob is? How many people outside of here know about this sprint that JD has lobbied sooo hard for? And how many people actually know there's such a thing as a C60 Ayoob knife to start with?
But I ain't taking no chances!! I want to be able to say I've been a part of this entire process from start to finish, that includes me securing this C60 sprint the day they're released! You may be very right.....but what if you're not? :eek:
Don't get me wrong though, after hearing JD's pitch for this knife, there is no way I can't try it out!
- Nick
Re: C-60 Ayoob Campaign: No I Won't Shut Up
Being available in SE & PE both will speed up sales for sure. I'm actually amazed at how many people want the SE version this time around. They didn't even offer SE in the 2011 Sprint Run. Isn't interesting how the market completely changed in less than 10 years?Evil D wrote: ↑Thu Dec 10, 2020 6:28 ambearrowland wrote: ↑Wed Dec 09, 2020 10:49 amI'd be surprised if it didn't set a record time in being sold out.
Once we get a drop date I'm taking that day off work. I'm not playing games with this one.
Re: C-60 Ayoob Campaign: No I Won't Shut Up
JD Spydo wrote: ↑Thu Dec 10, 2020 8:14 amBeing available in SE & PE both will speed up sales for sure. I'm actually amazed at how many people want the SE version this time around. They didn't even offer SE in the 2011 Sprint Run. Isn't interesting how the market completely changed in less than 10 years?Evil D wrote: ↑Thu Dec 10, 2020 6:28 ambearrowland wrote: ↑Wed Dec 09, 2020 10:49 amI'd be surprised if it didn't set a record time in being sold out.
Once we get a drop date I'm taking that day off work. I'm not playing games with this one.
I think there's been a lot of light shed on the realities of SE use and sharpening that has opened peoples' eyes. I think this is also a model that just goes hand in hand with SE, sort of how a hawkbill is just plain better with serrations. Some people may also be looking at the resale value of previous runs and are speculating what these may be worth in a few years.
All SE all the time since 2017
~David
~David
Re: C-60 Ayoob Campaign: No I Won't Shut Up
Dude!! you will love this C-60 Ayoob model. If you've never tried and used one before then you will be amazed at the ergos and overall efficiency.Mushroom wrote: ↑Thu Dec 10, 2020 8:11 amThen I better be ready to buy when they're released as well! :Dbenben wrote: ↑Thu Dec 10, 2020 8:05 amI can easily see your point, in the big picture how many people know who Massad Ayoob is? How many people outside of here know about this sprint that JD has lobbied sooo hard for? And how many people actually know there's such a thing as a C60 Ayoob knife to start with?
But I ain't taking no chances!! I want to be able to say I've been a part of this entire process from start to finish, that includes me securing this C60 sprint the day they're released! You may be very right.....but what if you're not? :eek:
Don't get me wrong though, after hearing JD's pitch for this knife, there is no way I can't try it out!
Almost any cutting job you would encounter with this C-60 Folder>> trust me it will do a nice job. But being you're into knives as much as you are I would advise getting both edge types. The serrated version of the C-60 cuts as good as any Spyderco model I've ever used in SE.
Re: C-60 Ayoob Campaign: No I Won't Shut Up
Hey Mushroom I'm not trying to be disagreeable with you. But ask anyone who was around when they released the 2011 Sprint Run of the C-60. Even those were not around very long after their release. After about 4 months after the release I had two other friends that wanted one and I was only able to find one more. I've not been able to get any more of those 2011 Sprint Run C-60s since then either ( Unless you want to pay horrible Ebay prices for one). Ask anyone whose tried to find one in recent years if you don't believe me.
Re: C-60 Ayoob Campaign: No I Won't Shut Up
It just confirms what I've said about that knife from the "get-go". That C-60 Ayoob design truly was ahead of it's time. I haven't seen or used any folder I can really compare it to since it's release. Oh sure that one big Szabo folder has some similarities but they are very different when you look at them closely. Massad Ayoob did such a great job on that design I would love to see him design another folder at some point.Evil D wrote: ↑Thu Dec 10, 2020 8:26 amJD Spydo wrote: ↑Thu Dec 10, 2020 8:14 amBeing available in SE & PE both will speed up sales for sure. I'm actually amazed at how many people want the SE version this time around. They didn't even offer SE in the 2011 Sprint Run. Isn't interesting how the market completely changed in less than 10 years?Evil D wrote: ↑Thu Dec 10, 2020 6:28 ambearrowland wrote: ↑Wed Dec 09, 2020 10:49 amI'd be surprised if it didn't set a record time in being sold out.
Once we get a drop date I'm taking that day off work. I'm not playing games with this one.
I think there's been a lot of light shed on the realities of SE use and sharpening that has opened peoples' eyes. I think this is also a model that just goes hand in hand with SE, sort of how a hawkbill is just plain better with serrations. Some people may also be looking at the resale value of previous runs and are speculating what these may be worth in a few years.
Actually I would like to talk to Mr. Ayoob about doing a fixed blade version of the C-60 :cool:
-
- Member
- Posts: 3598
- Joined: Thu Jul 19, 2018 8:59 pm
- Location: Julian Pennsylvania USA Earth
Re: C-60 Ayoob Campaign: No I Won't Shut Up
I agree 100 percent! Looks like I'm feeling ill that day :D
benben wrote: ↑Thu Dec 10, 2020 8:05 amI can easily see your point, in the big picture how many people know who Massad Ayoob is? How many people outside of here know about this sprint that JD has lobbied sooo hard for? And how many people actually know there's such a thing as a C60 Ayoob knife to start with?
But I ain't taking no chances!! I want to be able to say I've been a part of this entire process from start to finish, that includes me securing this C60 sprint the day they're released! You may be very right.....but what if you're not? :eek:
Barry
Bonne Journey!
For the word of God is living and powerful, and sharper than any two edged sword
Do what you can, where you are, with what you have! Theodore Roosevelt
MNOSD member 0032
Bonne Journey!
For the word of God is living and powerful, and sharper than any two edged sword
Do what you can, where you are, with what you have! Theodore Roosevelt
MNOSD member 0032
Re: C-60 Ayoob Campaign: No I Won't Shut Up
bearrowland wrote: ↑Thu Dec 10, 2020 11:39 amI agree 100 percent! Looks like I'm feeling ill that day :Dbenben wrote: ↑Thu Dec 10, 2020 8:05 amI can easily see your point, in the big picture how many people know who Massad Ayoob is? How many people outside of here know about this sprint that JD has lobbied sooo hard for? And how many people actually know there's such a thing as a C60 Ayoob knife to start with?
But I ain't taking no chances!! I want to be able to say I've been a part of this entire process from start to finish, that includes me securing this C60 sprint the day they're released! You may be very right.....but what if you're not? :eek:
All of those points...the same applies to every sprint that sells out in 5 minutes. Those same people likely know about this run too.
All SE all the time since 2017
~David
~David