Cara Cara 2 thoughts
- ginsuwarrior
- Member
- Posts: 199
- Joined: Wed Jun 05, 2013 8:59 pm
- Location: Virginia Mountains
Cara Cara 2 thoughts
Definitely a great deal for the money. $31.68 on the zon.
Opens very smoothly (thanks to the full stainless liners) and locks up solid. This knife had no noticeable blade play in any direction. The G10 handle felt nice in hand. Really like the choil, wish it was on Endura also.
My only gripes at all, 1) Blade a little too thick at edge for my tastes, and 2) the byrd's eye hole feels a little odd. Other than that seems like a solid knife for the money. Didn't test the the steel real hard, but I think sypderco's 8cr13mov is a very serviceable steel for EDC, based on my other experiences.
I've got too many knives to pass through my EDC and I don't keep a museum, so this one got passed along to my 8 year old :) Thanks for reading!!
Opens very smoothly (thanks to the full stainless liners) and locks up solid. This knife had no noticeable blade play in any direction. The G10 handle felt nice in hand. Really like the choil, wish it was on Endura also.
My only gripes at all, 1) Blade a little too thick at edge for my tastes, and 2) the byrd's eye hole feels a little odd. Other than that seems like a solid knife for the money. Didn't test the the steel real hard, but I think sypderco's 8cr13mov is a very serviceable steel for EDC, based on my other experiences.
I've got too many knives to pass through my EDC and I don't keep a museum, so this one got passed along to my 8 year old :) Thanks for reading!!
I like the knife but not as much as the raven crow or robin.they are cheaper and the blades are thicker and sharpened on both sides.plus the others i stated are g-10 not frn.give one of them a try they are cheaper and a much better knife by far.I don't get the reasoning by this but you will see in hand.I own all of them and my cara2 is for all the tasks I wouldn't use anyother knife for.good knife in the Byrd line but try the others I mentioned they are far better and cheaper.I even think the raven is better then the spyderco value folder line.
You know, the byrds are a great value, especially compared to similar
products from other companies. I only have a couple Byrd Robins and they
are solid little knives, but after using the Spyderhole for so long, the "teardrop"
hole just seems odd to me.
They pinch my thumb when I open them. I have had the robins for several years
and originally thought that I would get more byrd models, but never did. I still think
that they are a solid well built knife, not my cup of tea, I guess.
products from other companies. I only have a couple Byrd Robins and they
are solid little knives, but after using the Spyderhole for so long, the "teardrop"
hole just seems odd to me.
They pinch my thumb when I open them. I have had the robins for several years
and originally thought that I would get more byrd models, but never did. I still think
that they are a solid well built knife, not my cup of tea, I guess.
- salimoneus
- Member
- Posts: 361
- Joined: Sat Aug 13, 2011 8:52 pm
- Location: Colorado
-
- Member
- Posts: 82
- Joined: Sun Mar 17, 2013 10:17 am
- salimoneus
- Member
- Posts: 361
- Joined: Sat Aug 13, 2011 8:52 pm
- Location: Colorado
Sounds great! Is there a way to tell by looking on the packaging if one is from the new manufacturer or the old?sal wrote:The Cara Cara is being made by a new maker. The earlier maker is not longer making knives and the entire production was moved to a new maker. The new pieces are even better than before. We just started to receive some of the models and they are very nice. Very solid with even better quality.
sal
-
- Member
- Posts: 897
- Joined: Tue Jul 31, 2018 1:02 pm
- Location: Mesa Arizona USA Earth
Re: Cara Cara 2 thoughts
Doe anyone know what size the clip screws are on the Cara Cara 2. Specifically metric or standard, and thread pitch. I am attempting to do a small customization so I need to find replacement clip screws that are a little longer ( like 2mm ) than the standard ones
40 Spyderco knives in 11 different steels,
1 Byrd and 30 “others”
1 Byrd and 30 “others”
Re:
Hi Sal, sorry to bother you again.sal wrote: ↑Sat Jul 06, 2013 6:02 pmThe Cara Cara is being made by a new maker. The earlier maker is not longer making knives and the entire production was moved to a new maker. The new pieces are even better than before. We just started to receive some of the models and they are very nice. Very solid with even better quality.
sal
I was wondering if this new factory is the same that makes the Raven and Alcyone? And if so how the heck do I find out about getting one?
Thanks!
Re: Cara Cara 2 thoughts
Picked up a Cara Cara 2 a couple of weeks ago because I wanted a light, inexpensive yard/work knife. I got the combo edge as I cut vines and rope. I have found the tip to be a little thin for my liking. I have already got a slight bend in the very tip.
Re: Re:
That post about a new maker is from 2013.cbrstar wrote: ↑Mon Feb 25, 2019 5:27 pmHi Sal, sorry to bother you again.sal wrote: ↑Sat Jul 06, 2013 6:02 pmThe Cara Cara is being made by a new maker. The earlier maker is not longer making knives and the entire production was moved to a new maker. The new pieces are even better than before. We just started to receive some of the models and they are very nice. Very solid with even better quality.
sal
I was wondering if this new factory is the same that makes the Raven and Alcyone? And if so how the heck do I find out about getting one?
Thanks!
This is when the first generation Byrd Meadowlark and Cara Cara (the FRN models had feather patterns and the G-10/SS models had scale holes) were discontinued and the Meadowlark2 and Cara Cara2 were introduced.
Re: Re:
Dang you're right, I didn't even look at the time stamp. Now I'm curious to see what the originals look like in person.carrot wrote: ↑Mon Apr 08, 2019 12:30 pmThat post about a new maker is from 2013.cbrstar wrote: ↑Mon Feb 25, 2019 5:27 pmHi Sal, sorry to bother you again.sal wrote: ↑Sat Jul 06, 2013 6:02 pmThe Cara Cara is being made by a new maker. The earlier maker is not longer making knives and the entire production was moved to a new maker. The new pieces are even better than before. We just started to receive some of the models and they are very nice. Very solid with even better quality.
sal
I was wondering if this new factory is the same that makes the Raven and Alcyone? And if so how the heck do I find out about getting one?
Thanks!
This is when the first generation Byrd Meadowlark and Cara Cara (the FRN models had feather patterns and the G-10/SS models had scale holes) were discontinued and the Meadowlark2 and Cara Cara2 were introduced.
Re: Re:
I'll take a picture if I can dig one up. I have a Meadowlark G10 and FRN somewhere...cbrstar wrote: ↑Thu Apr 11, 2019 12:56 pmDang you're right, I didn't even look at the time stamp. Now I'm curious to see what the originals look like in person.carrot wrote: ↑Mon Apr 08, 2019 12:30 pmThat post about a new maker is from 2013.cbrstar wrote: ↑Mon Feb 25, 2019 5:27 pmHi Sal, sorry to bother you again.sal wrote: ↑Sat Jul 06, 2013 6:02 pmThe Cara Cara is being made by a new maker. The earlier maker is not longer making knives and the entire production was moved to a new maker. The new pieces are even better than before. We just started to receive some of the models and they are very nice. Very solid with even better quality.
sal
I was wondering if this new factory is the same that makes the Raven and Alcyone? And if so how the heck do I find out about getting one?
Thanks!
This is when the first generation Byrd Meadowlark and Cara Cara (the FRN models had feather patterns and the G-10/SS models had scale holes) were discontinued and the Meadowlark2 and Cara Cara2 were introduced.