Show your Mule

[GnifeGnut]

[quote="elmeringalo"][/quote]

[GnifeGnut]

Nice work Elmer. I like the black liner with the orange.

[elmeringalo]

Thanks for looking, GnifeGnut

[elmeringalo]

Finally the sheath, in black ostrich, to complete my MT05

[TheSpur22]

My first mule

[losinground]

My first mule

I just ordered the same scales but for my PSF27! Very nice!

[remnar]

PSF27 w/canvas scales!

Great minds... :D

[elmeringalo]

My new Mule. It's a MT10 in CTS BD1 with the handle in "Palosanto de la India" (Dalbergia Latifolia) and red liners, mosaic pins and laynard hole in brass

[TheSpur22]

[losinground]

[losinground]

Just got my scales, thought I would share!

[SpeedHoles]

Haha nice!
I'll keep this trend rolling.


Just curious, did you apply anything to the tang before installing the scales?

[elmeringalo]

The sheath for my last Mule, in python skin

[seamusshea]

My mules in my kydex sheaths. Each one is a little different! All with halpern scales.
(Left to right) CPM Cruwear, CTS B75P, CTS B70P, K390, PSF27 (bottom)

Unsheathed

[IronBird]

New handle my Mule team.

[elmeringalo]

Hi, this is my last Mule. It´s a MT20 with White micarta, bolsters and pins in nickel and red liners

[elmeringalo]

And this is the ostrich sheath

[MadRookie]

Superb!!

:)

[HarleyXJGuy]

Superb!!

:)

This.

I so need a mule in my collection.

[jabba359]

It's been a while since I made a set of Mule scales, as I wanted to get a drill press to help keep the holes straight. My drill press arrived the other week and I decided to make a set using black ash burl (stabilized blue) and carbon fiber, with white G-10 liners. I've never worked with carbon fiber before and was surprised by how easy it was to cut, grind, and finish. I did take extra precautions to keep the dust off me. I always use a respirator, but also started using a fan that blew the dust away from me as I was sanding so that it didn't get on my skin either. That seemed to have done the trick, as I didn't experience any itchiness from CF dust. I used my MT05 as a template, so sanded it flush on that knife. On my MT20, however, the scales are slightly undersized so the knife is slightly proud from the scales. I think this is similar to how the Halpern Ti handles tend to fit.

Here they are on my Mule Team 20.