Show your Mule
Re: Show your Mule
[quote="elmeringalo"][/quote]
Last edited by GnifeGnut on Mon Mar 30, 2015 12:34 am, edited 1 time in total.
Re: Show your Mule
Nice work Elmer. I like the black liner with the orange.
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
Re: Show your Mule
Finally the sheath, in black ostrich, to complete my MT05
No por mucho tempranar, amanece mas madrugo
- losinground
- Member
- Posts: 152
- Joined: Tue Sep 03, 2013 10:11 pm
- Location: Bridgeton, New Jersey, USA, Earth
- Contact:
Re: Show your Mule
PSF27 w/canvas scales!
Great minds... :D
Great minds... :D
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
- losinground
- Member
- Posts: 152
- Joined: Tue Sep 03, 2013 10:11 pm
- Location: Bridgeton, New Jersey, USA, Earth
- Contact:
Re: Show your Mule
- charlie
- losinground
- Member
- Posts: 152
- Joined: Tue Sep 03, 2013 10:11 pm
- Location: Bridgeton, New Jersey, USA, Earth
- Contact:
Re: Show your Mule
Just got my scales, thought I would share!
- SpeedHoles
- Member
- Posts: 2725
- Joined: Thu Jan 15, 2015 11:53 am
- Location: Mitten
Re: Show your Mule
Haha nice!
I'll keep this trend rolling.
Just curious, did you apply anything to the tang before installing the scales?
I'll keep this trend rolling.
Just curious, did you apply anything to the tang before installing the scales?
Going back to Caly.
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
-
- Member
- Posts: 9
- Joined: Fri May 15, 2015 6:16 am
Re: Show your Mule
My mules in my kydex sheaths. Each one is a little different! All with halpern scales.
(Left to right) CPM Cruwear, CTS B75P, CTS B70P, K390, PSF27 (bottom) Unsheathed
(Left to right) CPM Cruwear, CTS B75P, CTS B70P, K390, PSF27 (bottom) Unsheathed
Re: Show your Mule
New handle my Mule team.
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
- elmeringalo
- Member
- Posts: 126
- Joined: Tue Sep 02, 2014 6:50 am
- Location: Spain, Europe, Earth
- HarleyXJGuy
- Member
- Posts: 1395
- Joined: Fri Aug 29, 2014 8:50 pm
- Location: Michigan
Re: Show your Mule
This.MadRookie wrote:Superb!!
:)
I so need a mule in my collection.
On my radar: 110V Military, Police 4 and some sweet Rex 45 Military action.
Newest Spydies: S90v Ti Military, Pacific Salt and a special Kiwi.
Newest Spydies: S90v Ti Military, Pacific Salt and a special Kiwi.
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: Show your Mule
It's been a while since I made a set of Mule scales, as I wanted to get a drill press to help keep the holes straight. My drill press arrived the other week and I decided to make a set using black ash burl (stabilized blue) and carbon fiber, with white G-10 liners. I've never worked with carbon fiber before and was surprised by how easy it was to cut, grind, and finish. I did take extra precautions to keep the dust off me. I always use a respirator, but also started using a fan that blew the dust away from me as I was sanding so that it didn't get on my skin either. That seemed to have done the trick, as I didn't experience any itchiness from CF dust. I used my MT05 as a template, so sanded it flush on that knife. On my MT20, however, the scales are slightly undersized so the knife is slightly proud from the scales. I think this is similar to how the Halpern Ti handles tend to fit.
Here they are on my Mule Team 20.
Here they are on my Mule Team 20.