Show your mods!

[Jazz]

That purple stonewash is awesome! Did it wear away the lock at all?

[remnar]

That purple stonewash is awesome! Did it wear away the lock at all?

Not at all. Here's how I protected the lock face, inside of the scales and the detent ball.

Before washing.


After washing.

[Enigma]

Very nice mod Remnar

[darr3n]

Added a wire clip to my Persistence. Replaced the rear standoff with a pivot assembly from a donor Persistence. Cut grooves in the stock scale with a dremel to accept the wire clip.

[spyderg]

just tinkering with the Native5

[swigert]

Added a wire clip to my Persistence. Replaced the rear standoff with a pivot assembly from a donor Persistence. Cut grooves in the stock scale with a dremel to accept the wire clip.

this is a great mod...

[Holland]

Added a wire clip to my Persistence. Replaced the rear standoff with a pivot assembly from a donor Persistence. Cut grooves in the stock scale with a dremel to accept the wire clip.

Wow! Very well done sir, great mod indeed

[darr3n]

Wow! Very well done sir, great mod indeed

Thanks. It's a pretty easy mod if you're handy with a rotary tool. Unfortunately it's not very economical unless you have a broken Persistence to scavenge the pivot assembly from.

[SpeedHoles]

I might want to try that deep wire clip mod on some other G10 knives I have! Thanks for the idea, nice work!
What bit did you use on a dremel, just wondering? Or was it a cut-off wheel?

[darr3n]

I might want to try that deep wire clip mod on some other G10 knives I have! Thanks for the idea, nice work!
What bit did you use on a dremel, just wondering? Or was it a cut-off wheel?

I used a 1/16" Dremel engraving cutter. Seen here:
http://www.homedepot.com/p/Dremel-1-16- ... /204086205

[Scroop]

All black Endura 4 w/Allen Putman OD scales and a Glock 23 FDE Gen4

[bearfacedkiller]

Couldn't resist. I love black and yellow together and black and toxic green is just a little too zombie operator operating zombie like for me.

From this:


To this:

[Jazz]

The yellow and black looks 10 times better.

[spyderg]

The yellow and black looks 10 times better.

Agreed, but I really like the "leftover knife" too!

[SpeedHoles]

"Leftover knife" is a throwback to the old Jester in that color!
I saw somebody posted one on BF recently and I thought it was a blade swap into one of these new USN handles (if it's even possible to go from Jester to Ladybug and reuse Ladybug hardware or something).

Either way cool stuff. Nice zipper pulls too.

[BOOMER52]

Classic black G10 Anso textured Endura...

[remnar]

Those scales look superb Boomer. I assume you made them. :spyder:

[BOOMER52]

Those scales look superb Boomer. I assume you made them. :spyder:

Thanks... and YES... I machined them up this morning...

[Barman]

My Tatanka and Native 5 S110V carbon with Kevlar scales and Ti low carry clips.
These will be familiar to members over on BF.

[Jazz]

Those are sweet, Barman. Welcome over here, by the way.