I'll see your Spyderco and raise you another!

[IG-88]

GSO's List

There will be mistakes, so when you find them, just chuck me an PM and I will fix them.

Total = 988

Couldn’t do this list without Spydiewiki.
The guys have done a great job there.

[IG-88]

If no one matches this raise; get ready for the 24 hour rule. Because that's me done.

Thx for the wicked raises! I'll keep something ready to keep the thread flowing :) Must say I'm near the end aswell, only a couple of things left...

[gbelleh]

[GoldenSpydie]

24 hour rule

I'll raise C94OR2 UKPK orange FRN rescue:

[GoldenSpydie]

18 hour rule

I'll raise you Spyderholes. These are small metal discs that are cut out of the blades to form the Spyderholes. They are given away in little goodie bags to customers at the SFO.

[Peter1960]

You are lucky to live nearby the SFO and that the goodie bags have no hole where Spydyholes drop out on the way home :D

[Reject]

:D Manufacturing process for making Spyderholes.



:o Not my photo.

[Qcrazy]

I have a (1) Spyderco hole cutout. and I'll raise a Spyderco Felt Draw String Bag Black. Raise SFDSBBK

[Qcrazy]

Raise a C71BLPS Salsa.

[Qcrazy]

I'll now raise a Meerkat. This one differs from the one shown on page 57 in that it is made in Japan and has AUS-6 steel. The one shown I think would be better described or listed as a C64PBK. This one should be listed as the C64JPBK since made in Japan. I'm not sure though I think the J in the model distinction stands for Japan in this manufacture to distinguish it from the USA made Meerkat. This was my first Spyderco knife. I purchased it from the old Spyderco Outlet store in 2009. I have had a sharpmaker since 1985, and only after the Meerkat was I Spyder bit.

[Reject]

Opps My mistake. Peter’s Meerkat should have been added to the list as a PBK, not JPBK.

But on the bright side; :D I can match that.

It is my contention, that there are 10 models of the Spyderco Spot.
Divided into two generations of the five models.

The first generation have five holes in the blade, SKU's for those are:

FB08P - Spot PE
FB08S - Spot SE
FB08PBB - Spot Black PE
FB08BMP - Spot Micarta PE
FB08BMS – Spot Micarta SE

The second generation use the same SKU; but have a Rivet or button in the first hole to aid in sheath retention.

Models submitted so far are:

FB08P - Spot PE – With rivet
FB08S - Spot SE - With rivet
FB08PBB - Spot Black PE - With rivet
FB08BMP - Spot Micarta PE - With rivet
FB08BMS – Spot Micarta SE – gen 1


:) So.

[Qcrazy]

Nice Reject! Let's see all the Spots.

[Reject]

Nice Reject! Let's see all the Spots.

I stated that they existed, not that I had them.

I am missing 2 of them; :D but the hunt continues.

[Reject]

18 hour rule.

[jmh58]

Those SPOTs are KOOL!! John :)

[Reject]

18 hour rule.



That is the last of the Spots that I have.
Not sure if i will be able to find anything else to raise with, but I will have a look.

[Qcrazy]

Nice knives Reject. Your pictures make me want some Spots. I'm not much of a fixed blade guy, though with those blade shapes and lengths I could be drawn in.

[Reject]

Nice knives Reject. Your pictures make me want some Spots. I'm not much of a fixed blade guy, though with those blade shapes and lengths I could be drawn in.

Be careful; :D when get one Spot, you know your going to end up with more.

18 hour rule.

Looky what I found in the back of the knife locker.



I’ll keep digging, :o but I am almost, definitely sure that is it.

[DutchBlades]

:eek: Nice PM2

[Reject]

:eek: Nice PM2

It's an PM one, the 2 in the SKU is for the D2 steel.