Spyderco ClipiTool w/ Screwdriver/Opener ~ C175

Features a non-locking primary blade and a combination bottle opener/flat-blade screwdriver. More info...

Handle Material: N/A

MAIN CATALOG 1 Items per page: 30, All

Spyderco Swick 3 ~ FB14P3

MSRP $49.95
The Swick 3’s enhanced finger-hole design is larger and is complemented by jimping on the adjacent top and bottom surfaces of the tang. These refined ergonomics make the Swick3 even more versatile and secure during use. More info...

Spyderco Mule Team 19 (PSF27) ~ MT19

MSRP $79.95
Mule Team 19 features PSF27, a tool steel produced using the Spray Forming Process. More info...

Spyderco Bushcraft Blank ~ FB26SPEC

MSRP $119.95
Bushcraft is a tradition as much as a sport. It follows a regime of survival skills derived from Australian Bushmen and has been introduced into the mainstreamed outdoor sports industry by U.K. television host Ray Mears. More info...

Spyderco Whale Rescue Blade H-1 ~ BWRSH1

H-1 Will Not Rust!
MSRP $179.95
One of the tragic effects of commercial fishing efforts is the entanglement of whales in fishing nets and related rigging. As the entangled whales struggle to break free, the lines and nets are pulled taut, often resulting in serious injury and sometimes death. Fortunately, there are a number of wildlife conservation groups that specialize in rescuing these magnificent animals, but until a few years ago, their efforts were hampered because they did not have the proper tools for the job. More info...

Discontinued

Spyderco Mule Team 05 (9Cr18Mo) ~ MT05

Discontinued
MSRP $19.95
Spyderco calls knife models designed and built for testing and evaluation Mules. When a group of these are brought together they make a team of mules, thus the name of our new knife release: The Mule Team. More info...

Spyderco Mule Team 12 (Cruwear) ~ MT12P

Discontinued
MSRP $59.95
Spyderco Mule Team 12 More info...

Spyderco Mule Team 16 (CTS-XHP Blemished) ~ MTXHP

Blemished - Discontinued -
MSRP $59.95
Mule Team CTS-XHP Blemished More info...

Spyderco Mule Team 16 (CTS-XHP) ~ MT16

Discontinued
MSRP $59.95
Mule Team16 is made with CTS XHP powdered steel produced exclusively by Carpenter Steel Corporation of Reading, Pennsylvania U.S.A. More info...

Spyderco Mule Team 06 (CPM S35VN) ~ MT06

Discontinued
MSRP $64.95
At this time, there is still question as to whether this fine steel will be in production. Spyderco was fortunate to be able to grab some while it was still available and this Mule Team model is the result of that opportunity. More info...

Spyderco Mule Team 13 (Elmax) ~ MT13P

Discontinued
MSRP $64.95
Spyderco Mule Team 13 - Elmax Spyderco’s thirteenth Mule Team Project installment uses Elmax steel produced by Böhler-Uddeholm Steel of Kapfenberg, Austria. More info...

Spyderco Mule Team 02 (CPM M4) ~ MT02

Discontinued
MSRP $69.95
The Mule team project was created as a simple, inexpensive venue for "steel junkys" to have an opportunity to test different blade steels themselves. Each run will have a different interesting steel. Each run will have the same pattern, a fixed blade with a full tang. Each run will have the same thickness, grind, edge and will be heat treated to the optimal hardness for that steel. No handle, scales or sheath are provided. This not only saves you funds, but gives you the opportunity to make (or have made) custom handles and sheaths. More info...

Spyderco Mule Team 03 (CPM S90V) ~ MT03

Discontinued
MSRP $69.95
The Mule team project was created as a simple, inexpensive venue for "steel junkys" to have an opportunity to test different blade steels themselves. Each run will have a different interesting steel. Each run will have the same pattern, a fixed blade with a full tang. Each run will have the same thickness, grind, edge and will be heat treated to the optimal hardness for that steel. No handle, scales or sheath are provided. This not only saves you funds, but gives you the opportunity to make (or have made) custom handles and sheaths. More info...

Spyderco Mule Team 10 (CTS-BD1) ~ MT10

Discontinued
MSRP $69.95
The project allows steel-obsessed knife knuts the opportunity to test, try and use alloys not readily available to the industry. More info...

Spyderco Mule Team 11 (M390) ~ MT11

Discontinued
MSRP $74.95
June 2011 Mule Team M390 More info...

Spyderco Mule Team 15 (CTS-B75P) ~ MT15P

Discontinued
MSRP $74.95
Spyderco’s Mule Team 15 is made with CTS B75P powdered steel produced by Carpenter Steel of Reading, Pennsylvania U.S.A. More info...

Spyderco Mule Team 01 (52100) ~ MT01

Discontinued
MSRP $79.95
Spyderco's Mule Team officially launches with a single-piece fixed blade pattern. The blade is leaf-shaped with a sharpened and finished PlainEdge blade but with an unfinished handle providing some a do-it-yourself opportunity. The unfinished handle has a series of holes for attaching a custom handle or for wrapping in cord. All Mule Team Pieces are sold without handle scales or a carry sheath focusing the project on the blade steel and opening the door for the owner to create his/her own handle scale and carry options. The initial MT01 will be made using 52100 steel. More info...

Spyderco Mule Team 04 (ZDP-189) ~ MT04

Discontinued
MSRP $79.95
What is a Mule?In the English language the term mule has multiple definitions: There's the obvious equine reference being the offspring of a male donkey and a female horse. It can be a coin minted from two dies by mistake and the auto industry refers to the­ir test vehicles as a mules. Spyderco also calls knife models designed and built for testing and evaluation Mules. When a group of these are brought together they make a team of mules, thus the name of our new knife release: The Mule Team. More info...

Spyderco Mule Team 08 (Aogami Super Blue) ~ MT08

Discontinued
MSRP $79.95
Aogami Super Blue is classified as exotic steel by cutlery standards. More info...

Spyderco Swick ~ FB14P

Discontinued
MSRP $79.95
Swift & Quick: The 2009 Swick is a limited 500 piece run at the request of customers who loved the original Swick which sold and was eventually discontinued several years ago. The revival, like the original, is designed by Sal Glesser. More info...

Spyderco Mule Team 07 (Damascus) ~ MT07

Discontinued
MSRP $84.95
In the English language the term mule has multiple definitions: There's the obvious equine reference being the offspring of a male donkey and a female horse. It can be a coin minted from two dies by mistake and the auto industry refers to their test vehicles as a mules. Spyderco also calls knife models designed and built for testing and evaluation Mules More info...

Spyderco Mule Team 09 (Cobalt Special) ~ MT09

Discontinued
MSRP $84.95
Mule Team Project by Spyderco. More info...

Spyderco Mule Team 18 (CPM-S110V) ~ MT18

Discontinued
MSRP $89.95
CPM S110V blade steel is produced using a CPM - Crucible Particle Metallurgy process developed by Crucible Industries of Solvay, New York, U.S.A. More info...

Spyderco Swick 2 ~ FB14P2

Discontinued
MSRP $90.05
The Swick2 is a limited 600 piece run with design elements from both Spyderco's Sal Glesser and French knife designer Fred Perrin. More info...
MAIN CATALOG 1 Items per page: 30, All