Spyderco Dodo Carbon Fiber

C80CF

$299.95 MSRP




Description
Technical Specs

Eric Glesser is the designer of the original Dodo.  The challenge in developing this CLIPIT was to create a small folder that feels and cuts like a much larger knife.  To do that, the design needed to have exceptional handle ergonomics and a hard-use lock, and be made from high-quality materials.  All these features were then paired with a small blade.  
 
Short and squat, the Dodo’s blade focuses cutting power around an arcing belly which tapers to a finely-ground, downward curving tip.  The tapered tip makes it ideal for detailed and fine cutting.  The blade is 2.125” (54mm) long and made of Crucible CPM S30V stainless steel that is paired with a large, obligingly grip-able, carbon fiber handle.  Finger choils on the underside of the handle position your hand in an ergonomic solid stance, reaching from the handle’s tang to the tapered pommel.  The result is a fistful of leverage that functions flawlessly in both a forward or reverse grip.  
 
The Dodo has a Spyderco Ball Bearing Lock™.  The Ball Bearing lock consists of a ceramic ball bearing that when the blade is opened, a spring-loaded plunger drives the ball bearing forward to wedge between a ramp on the blade and a steel “anvil” in the handle’s back spacer. Pulling the ball bearing back releases the lock and allows the blade to close smoothly while keeping your fingers safely away from the sharp edge. One of the strongest folding knife lock mechanisms ever invented, it is also one of the smoothest and easiest to operate.


Overall Length
6.9" (157 mm)
Blade Length
2.12" (54 mm)
Steel
CPM S30V
Closed Length
4.07" (103 mm)
Edge Length
1.70" (43 mm)
Weight
2.6 oz (74 g)
Blade Thickness
0.125" (3.2 mm)
Handle
Carbon Fiber
Clip Position
Left/Right
Tip Carry Position
Tip-up
Lock Type
        
Grind
Sheath
        
Origin
United States









All rights reserved. All product names, art and text herein are the property of Spyderco, Inc. and may not be reproduced in part or whole without the sole written permission of Spyderco, Inc.
Please note, images shown on Spyderco.com may be of Production Prototypes. Modification of products, materials, measurements, technical specifications and availability can occur.